Enhanced Dual Confocal Measurement System
Journal Article
·
· Fusion Science and Technology
- General Atomics, San Diego, CA (United States); General Atomics
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- General Atomics, San Diego, CA (United States)
A measurement instrument utilizing dual, chromatic, confocal, distance sensors has been jointly developed by General Atomics (GA) and Sandia National Laboratories (SNL) for thickness and flatness measurement of target components used in dynamic materials properties (DMP) experiments on the SNL Z-Machine (Z). Compared to previous methods used in production of these types of targets, the tool saves time and yields a 4x reduction in thickness uncertainty which is one of the largest sources of error in equation of state (EOS) measurements critical to supporting the NNSA’s Stockpile Stewardship program and computer modeling of high energy density experiments. It has numerous differences from earlier instruments operating on the dual confocal sensor principle to accommodate DMP components including larger lateral travel, longer working distance, ability to measure flatness in addition to thickness, built-in thickness calibration standards for quickly checking calibration before and after each measurement, and streamlined operation. Thickness and flatness of 0.2mm-3.3mm thick sections of diamond machined copper and aluminum can be measured to “sub-micron” accuracy. Sections up to 6mm thick can be measured with as-yet undermined accuracy. Furthermore, samples must have one surface which is flat to within 300µm, lateral dimensions of no more than 50mm x 50mm, and height less than 40mm.
- Research Organization:
- General Atomics, San Diego, CA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE National Nuclear Security Administration (NNSA); USDOE National Nuclear Security Administration (NNSA), Office of Defense Science (NA-113)
- Grant/Contract Number:
- AC04-94AL85000; NA0001808
- OSTI ID:
- 1402464
- Alternate ID(s):
- OSTI ID: 1456406
OSTI ID: 1469641
- Report Number(s):
- SAND2018--9580J
- Journal Information:
- Fusion Science and Technology, Journal Name: Fusion Science and Technology Journal Issue: 2 Vol. 73; ISSN 1536-1055
- Publisher:
- American Nuclear SocietyCopyright Statement
- Country of Publication:
- United States
- Language:
- English
Near-absolute Hugoniot measurements in aluminum to 500 GPa using a magnetically accelerated flyer plate technique
|
journal | October 2003 |
Analysis of shockless dynamic compression data on solids to multi-megabar pressures: Application to tantalum
|
journal | November 2014 |
Shock Compression of Quartz to 1.6 TPa: Redefining a Pressure Standard
|
journal | November 2009 |
Similar Records
Confocal Raman imaging of crystalline an glassy materials
Development of a Multi-Press Assembly Device for Planar Dynamic Material Property Targets
Conference
·
Sat Dec 30 23:00:00 EST 1995
·
OSTI ID:466534
Development of a Multi-Press Assembly Device for Planar Dynamic Material Property Targets
Journal Article
·
Thu Nov 30 19:00:00 EST 2017
· Fusion Science and Technology
·
OSTI ID:1462366