Geometric analysis of enhanced thermal conductivity in epoxy composites: A comparison of graphite and carbon nanofiber fillers

Ruminski, Anne M.; Yang, Fan; Cho, Eun Seon; Silber, Joseph; Olivera, Edgar; Johnson, Thomas; Anderssen, Eric C.; Haber, Carl H.; Urban, Jeffrey J.

doi:10.1002/pssa.201600368

Geometric analysis of enhanced thermal conductivity in epoxy composites: A comparison of graphite and carbon nanofiber fillers

Journal Article · Mon Sep 05 00:00:00 EDT 2016 · Physica Status Solidi. A, Applications and Materials Science

DOI:https://doi.org/10.1002/pssa.201600368· OSTI ID:1400582

Ruminski, Anne M. ^[1]; Yang, Fan ^[1]; Cho, Eun Seon ^[1]; Silber, Joseph ^[2]; Olivera, Edgar ^[1]; Johnson, Thomas ^[2]; Anderssen, Eric C. ^[2]; Haber, Carl H. ^[3]; Urban, Jeffrey J. ^[1]

The Molecular Foundry, Materials Sciences Division Lawrence Berkeley National Laboratory Berkeley California 94720 USA
Engineering Division Lawrence Berkeley National Laboratory Berkeley California 94720 USA
Physics Division Lawrence Berkeley National Laboratory Berkeley California 94720 USA

We analyze the geometric effects of two different carbon fillers on the enhancement of the thermal conductivity of carbon‐epoxy composites. This study compares the thermal properties of composites containing graphite powder (2‐dimensional) and carbon nanofibers (1‐dimensional) incorporated in an industrial epoxy. Calculations using the generalized effective medium model were also used to examine the effect of the geometry and aspect ratio of the carbon filler. Experiments show that at a filler volume fraction loading of 0.10, the effective thermal conductivity of the composites was improved up to eightfold for carbon nanofiber and threefold for graphite in comparison to the neat epoxy. The superior performance of the carbon nanofiber composite is due to the larger aspect ratio of nanofiber which allows greater overlap between neighboring particles. However, this greater overlap also results in the composite becoming prohibitively viscous at low filler volume fractions. In graphite composite at the maximum filler volume fraction of 0.3, the resulting thermal conductivity improvement was 14‐fold over the neat epoxy. Calculations indicated that the improved thermal conductivity was primarily due to the filler particle geometry. Additionally, calculations suggest the wider distribution of graphite particle aspect ratio could have a positive influence on enhancing composite thermal conductivity.

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 1400582

Journal Information:: Physica Status Solidi. A, Applications and Materials Science, Journal Name: Physica Status Solidi. A, Applications and Materials Science Journal Issue: 1 Vol. 214; ISSN 1862-6300

Publisher:: Wiley Blackwell (John Wiley & Sons)Copyright Statement

Country of Publication:: Germany

Language:: English

References (18)

Enhanced thermal conductivity of boron nitride epoxy-matrix composite through multi-modal particle size mixing Yung, K. C.; Liem, H. Journal of Applied Polymer Science, Vol. 106, Issue 6 https://doi.org/10.1002/app.27027	journal	December 2007
Dielectric properties of graphite-based epoxy composites: Dielectric properties of graphite-based epoxy composites Kranauskaite, Ieva; Macutkevic, Jan; Kuzhir, Polina physica status solidi (a), Vol. 211, Issue 7 https://doi.org/10.1002/pssa.201431101	journal	April 2014
Thermal Conductivity of Pure Metals and Alloys Madelung, O.; White, G. K. Landolt-Börnstein - Group III Condensed Matter https://doi.org/10.1007/b91373	book	January 1991
Generalized Bruggeman Formula for the Effective Thermal Conductivity of Particulate Composites with an Interface Layer Ordóñez-Miranda, J.; Alvarado-Gil, J. J.; Medina-Ezquivel, R. International Journal of Thermophysics, Vol. 31, Issue 4-5 https://doi.org/10.1007/s10765-010-0756-2	journal	May 2010
A simple model for thermal conductivity of carbon nanotube-based composites Nan, C. -W.; Shi, Z.; Lin, Y. Chemical Physics Letters, Vol. 375, Issue 5-6 https://doi.org/10.1016/S0009-2614(03)00956-4	journal	July 2003
Dielectric properties and conductivity of carbon nanofiber/semi-crystalline polymer composites Sui, G.; Jana, S.; Zhong, W. H. Acta Materialia, Vol. 56, Issue 10 https://doi.org/10.1016/j.actamat.2008.01.034	journal	June 2008
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review Han, Zhidong; Fina, Alberto Progress in Polymer Science, Vol. 36, Issue 7 https://doi.org/10.1016/j.progpolymsci.2010.11.004	journal	July 2011
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure Shen, Heng; Guo, Jing; Wang, Hao ACS Applied Materials & Interfaces, Vol. 7, Issue 10 https://doi.org/10.1021/am507416y	journal	March 2015
Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite Li, Qi; Guo, Yufen; Li, Weiwei Chemistry of Materials, Vol. 26, Issue 15 https://doi.org/10.1021/cm501473t	journal	July 2014
Carbon nanotube composites for thermal management Biercuk, M. J.; Llaguno, M. C.; Radosavljevic, M. Applied Physics Letters, Vol. 80, Issue 15 https://doi.org/10.1063/1.1469696	journal	April 2002
A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials Hashin, Z.; Shtrikman, S. Journal of Applied Physics, Vol. 33, Issue 10 https://doi.org/10.1063/1.1728579	journal	October 1962
Heat conduction in graphite-nanoplatelet-reinforced polymer nanocomposites Hung, M. -T.; Choi, O.; Ju, Y. S. Applied Physics Letters, Vol. 89, Issue 2 https://doi.org/10.1063/1.2221874	journal	July 2006
Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites Deng, Fei; Zheng, Quan-Shui; Wang, Li-Feng Applied Physics Letters, Vol. 90, Issue 2 https://doi.org/10.1063/1.2430914	journal	January 2007
Enhanced thermal conductivity of polymer composites filled with three-dimensional brushlike AlN nanowhiskers Shi, Zhongqi; Radwan, Mohamed; Kirihara, Soshu Applied Physics Letters, Vol. 95, Issue 22 https://doi.org/10.1063/1.3271028	journal	November 2009
Effective thermal conductivity of particulate composites with interfacial thermal resistance Nan, Ce-Wen; Birringer, R.; Clarke, David R. Journal of Applied Physics, Vol. 81, Issue 10 https://doi.org/10.1063/1.365209	journal	May 1997
Turning Carbon Nanotubes from Exceptional Heat Conductors into Insulators Prasher, Ravi S.; Hu, X. J.; Chalopin, Y. Physical Review Letters, Vol. 102, Issue 10 https://doi.org/10.1103/PhysRevLett.102.105901	journal	March 2009
Graphite–graphene hybrid filler system for high thermal conductivity of epoxy composites Mahanta, Nayandeep K.; Loos, Marcio R.; Manas Zlocozower, Ica Journal of Materials Research, Vol. 30, Issue 7 https://doi.org/10.1557/jmr.2015.68	journal	April 2015
Nanocomposites for thermoelectrics and thermal engineering Liao, Bolin; Chen, Gang MRS Bulletin, Vol. 40, Issue 9 https://doi.org/10.1557/mrs.2015.197	journal	September 2015

Similar Records

The effect of filler aspect ratio on the electromagnetic properties of carbon-nanofibers reinforced composites

Journal Article · Fri Aug 14 00:00:00 EDT 2015 · Journal of Applied Physics · OSTI ID:22494726

Epoxy as Filler or Matrix for Polymer Composites

Book · Mon Jan 31 23:00:00 EST 2022 · OSTI ID:1845770

Controlled High Filler Loading of Functionalized Al{sub 2}O{sub 3}-Filled Epoxy Composites for LED Thermal Management

Journal Article · Thu Mar 15 00:00:00 EDT 2018 · Journal of Materials Engineering and Performance · OSTI ID:22858058

Geometric analysis of enhanced thermal conductivity in epoxy composites: A comparison of graphite and carbon nanofiber fillers

Citation Formats

References (18)

Similar Records

Related Subjects