Evaluating the economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules

Nanayakkara, Sanjini U.; Horowitz, Kelsey; Kanevce, Ana; Woodhouse, Michael; Basore, Paul

doi:10.1002/pip.2849

Evaluating the economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules

Journal Article · Thu Jan 19 23:00:00 EST 2017 · Progress in Photovoltaics

DOI:https://doi.org/10.1002/pip.2849· OSTI ID:1351875

Nanayakkara, Sanjini U. ^[1]; Horowitz, Kelsey ^[1]; Kanevce, Ana ^[1]; Woodhouse, Michael ^[1]; Basore, Paul ^[1]

National Renewable Energy Lab. (NREL), Golden, CO (United States)

In this paper, we analyze the potential cost competitiveness of two frameless, glass–glass thin-film tandem photovoltaic module structures, cadmium telluride (CdTe)/CuInSe₂ (CIS) and CuIn_0.3Ga_0.7Se₂ (CIGS)/CIS, based on the demonstrated cost of manufacturing the respective component cell technologies in high volume. To consider multiple economic scenarios, we base the CdTe/CIS module efficiency on the current industrial production of CdTe modules, while for CIGS/CIS, we use an aspirational estimate for CIGS efficiency. We focus on four-terminal mechanically stacked structures, thus avoiding the need to achieve current matching between the two cells. The top cell in such a tandem must have a transparent back contact, which has not been successfully implemented to date. However, for the purpose of understanding the economic viability of both tandems, we assume that this can be implemented at a cost similar to that of sputtered indium tin oxide. The cost of both tandem module structures was found to be nearly identical on an equal-area basis and approximately $30/m² higher than the single-junction alternatives. Both tandem modules are about 4% (absolute) more efficient than a module by using the top-cell material alone. We find that these tandem modules might reduce total system cost by as much as 11% in applications having a high area-related balance-of-system cost, such as area-constrained residential systems; however, the relative advantage of tandems decreases in the cases where balance-of-system costs are lower, such as in commercial and utility scale systems.

View Accepted Manuscript (DOE)

Research Organization:: National Renewable Energy Lab. (NREL), Golden, CO (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Solar Energy Technologies Office (EE-4S)

Grant/Contract Number:: AC36-08GO28308

OSTI ID:: 1351875

Alternate ID(s):: OSTI ID: 1351874

Report Number(s):: NREL/JA--5K00-65845

Journal Information:: Progress in Photovoltaics, Journal Name: Progress in Photovoltaics Journal Issue: 4 Vol. 25; ISSN 1062-7995

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

References (24)

New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20% Jackson, Philip; Hariskos, Dimitrios; Lotter, Erwin Progress in Photovoltaics: Research and Applications, Vol. 19, Issue 7 https://doi.org/10.1002/pip.1078	journal	January 2011
Wide bandgap Cu(In,Ga)Se ₂ solar cells with improved energy conversion efficiency : Wide bandgap Cu(In,Ga)Se Contreras, Miguel A.; Mansfield, Lorelle M.; Egaas, Brian Progress in Photovoltaics: Research and Applications, Vol. 20, Issue 7 https://doi.org/10.1002/pip.2244	journal	June 2012
Tracking US photovoltaic system prices 1998-2012: a rapidly changing market: Tracking US photovoltaic system prices 1998-2012 Barbose, Galen; Darghouth, Naïm Richard; Weaver, Samantha Progress in Photovoltaics: Research and Applications, Vol. 23, Issue 6 https://doi.org/10.1002/pip.2482	journal	March 2014
Solar cell efficiency tables (version 47): Solar cell efficiency tables Green, Martin A.; Emery, Keith; Hishikawa, Yoshihiro Progress in Photovoltaics: Research and Applications, Vol. 24, Issue 1 https://doi.org/10.1002/pip.2728	journal	November 2015
Technology advances needed for photovoltaics to achieve widespread grid price parity: Widespread grid price parity for photovoltaics Jones-Albertus, Rebecca; Feldman, David; Fu, Ran Progress in Photovoltaics: Research and Applications, Vol. 24, Issue 9 https://doi.org/10.1002/pip.2755	journal	April 2016
Economic competitiveness of III-V on silicon tandem one-sun photovoltaic solar modules in favorable future scenarios: Economic competitiveness of III-V on on silicon tandem modules Bobela, David C.; Gedvilas, Lynn; Woodhouse, Michael Progress in Photovoltaics: Research and Applications, Vol. 25, Issue 1 https://doi.org/10.1002/pip.2808	journal	September 2016
Modeled performance of polycrystalline thin-film tandem solar cells Coutts, Timothy J.; Emery, Keith A.; Scott Ward, J. Progress in Photovoltaics: Research and Applications, Vol. 10, Issue 3 https://doi.org/10.1002/pip.419	journal	January 2002
Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review Czanderna, A. W.; Pern, F. J. Solar Energy Materials and Solar Cells, Vol. 43, Issue 2 https://doi.org/10.1016/0927-0248(95)00150-6	journal	September 1996
Numerical Simulation of CGS/CIGS Single and Tandem Thin-film Solar Cells using the Silvaco-Atlas Software Elbar, M.; Tobbeche, S. Energy Procedia, Vol. 74 https://doi.org/10.1016/j.egypro.2015.07.766	journal	August 2015
II–VI compounds as the top absorbers in tandem solar cell structures Mahawela, P.; Sivaraman, G.; Jeedigunta, S. Materials Science and Engineering: B, Vol. 116, Issue 3 https://doi.org/10.1016/j.mseb.2004.05.054	journal	February 2005
Perspectives on the pathways for cadmium telluride photovoltaic module manufacturers to address expected increases in the price for tellurium Woodhouse, Michael; Goodrich, Alan; Margolis, Robert Solar Energy Materials and Solar Cells, Vol. 115 https://doi.org/10.1016/j.solmat.2012.03.023	journal	August 2013
A wafer-based monocrystalline silicon photovoltaics road map: Utilizing known technology improvement opportunities for further reductions in manufacturing costs Goodrich, Alan; Hacke, Peter; Wang, Qi Solar Energy Materials and Solar Cells, Vol. 114 https://doi.org/10.1016/j.solmat.2013.01.030	journal	July 2013
Effect of band mismatch on minority carrier transport in heterojunction solar cells Crandall, R. S.; Li, J. V. Solar Energy Materials and Solar Cells, Vol. 129 https://doi.org/10.1016/j.solmat.2013.11.012	journal	October 2014
The potential of textured front ZnO and flat TCO/metal back contact to improve optical absorption in thin Cu(In,Ga)Se2 solar cells Čampa, A.; Krč, J.; Malmström, J. Thin Solid Films, Vol. 515, Issue 15 https://doi.org/10.1016/j.tsf.2006.12.093	journal	May 2007
Transparent CdTe solar cells with a ZnO:Al back contact Heisler, C.; Schnohr, C. S.; Hädrich, M. Thin Solid Films, Vol. 548 https://doi.org/10.1016/j.tsf.2013.09.087	journal	December 2013
Optimization of CIGS-Based PV Device through Antimony Doping Yuan, Min; Mitzi, David B.; Liu, Wei Chemistry of Materials, Vol. 22, Issue 2, p. 285-287 https://doi.org/10.1021/cm903428f	journal	January 2010
High-Performance, Transparent, and Stretchable Electrodes Using Graphene–Metal Nanowire Hybrid Structures Lee, Mi-Sun; Lee, Kyongsoo; Kim, So-Yun Nano Letters, Vol. 13, Issue 6 https://doi.org/10.1021/nl401070p	journal	May 2013
Utility-scale solar PV performance enhancements through system-level modifications Glick, Andrew; Ali, Naseem; Bossuyt, Juliaan Scientific Reports, Vol. 10, Issue 1 https://doi.org/10.1038/s41598-020-66347-5	journal	June 2020
29.5%‐efficient GaInP/GaAs tandem solar cells Bertness, K. A.; Kurtz, Sarah R.; Friedman, D. J. Applied Physics Letters, Vol. 65, Issue 8 https://doi.org/10.1063/1.112171	journal	August 1994
Over 30% efficient InGaP/GaAs tandem solar cells Takamoto, Tatsuya; Ikeda, Eiji; Kurita, Hiroshi Applied Physics Letters, Vol. 70, Issue 3, p. 381-383 https://doi.org/10.1063/1.118419	journal	January 1997
Indium-Gallium Segregation in CuIn x Ga 1 − x Se 2 : An Ab Initio –Based Monte Carlo Study Ludwig, Christian D. R.; Gruhn, Thomas; Felser, Claudia Physical Review Letters, Vol. 105, Issue 2 https://doi.org/10.1103/PhysRevLett.105.025702	journal	July 2010
Design of CdZnTe and Crystalline Silicon Tandem Junction Solar Cells Zhou, Chao; Chung, Haejun; Wang, Xufeng IEEE Journal of Photovoltaics, Vol. 6, Issue 1 https://doi.org/10.1109/JPHOTOV.2015.2481598	journal	January 2016
Nonvacuum Solution Synthesis of (Ag,Cu)(In,Ga)Se ₂ Absorbers for Applications in Thin-Film Solar Cells Wu, Jyun-Jie; Yang, Che-Yuan; Sung, Jen-Cheng Journal of the American Ceramic Society, Vol. 98, Issue 12 https://doi.org/10.1111/jace.13818	journal	September 2015
Cu(In1-x, Gax)Se2-Based Thin Film Solar Cells Using Transparent Conducting Back Contacts Nakada, Tokio; Hirabayashi, Yutaka; Tokado, Takehito Japanese Journal of Applied Physics, Vol. 41, Issue Part 2, No. 11A https://doi.org/10.1143/JJAP.41.L1209	journal	November 2002

Similar Records

Manufacturing technology development for CuInGaSe{sub 2} solar cell modules. Final subcontract report, 9 January 1991--14 April 1991

Technical Report · Thu Oct 31 23:00:00 EST 1991 · OSTI ID:10114404

Manufacturing technology development for CuInGaSe sub 2 solar cell modules

Technical Report · Thu Oct 31 23:00:00 EST 1991 · OSTI ID:5916144

High-Efficiency CdTe and CIGS Thin-Film Solar Cells: Highlights and Challenges

Conference · Sat Dec 31 23:00:00 EST 2005 · OSTI ID:943980

Related Subjects

14 SOLAR ENERGY
CIGS
CIS
CdTe
cost modeling
photovoltaics
tandems
thin-film solar cells

Evaluating the economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules

Citation Formats

References (24)

Similar Records

Related Subjects