The Effect of Atmosphere and ZnO Morphology on the Performance of Hybrid Poly(3-hexylthiophene)/ZnO Nanofiber Photovoltaic Devices
Journal Article
·
· Journal of Physical Chemistry. C
We present detailed investigations of the fabrication and characterization of photovoltaic devices consisting of poly(3-hexylthiophene) (P3HT) intercalated into a mesoporous structure of ZnO nanofibers. ZnO nanofibers were grown via a low-temperature hydrothermal route from a solution of zinc nitrate precursor. P3HT was spin-coated on top of the structure, and intercalation into the voids between the nanofibers was induced with annealing. A silver electrode was used as the top contact. Spin-coating, storage, and testing of the device were performed in air. We discuss the effects of atmosphere and ZnO nanofiber morphology on device performance. Optimized nanofiber devices exhibited a 4-fold increase in the short circuit current (2.17 mA/cm2) as compared to that of a planar ZnO-P3HT bilayer device (0.52 mA/cm2) as a result of the increased donor-acceptor interfacial area. The efficiency of the nanofiber based device under 1 sun-simulated solar illumination was 0.53% and was found to increase at higher incident light intensities, reaching a value of 0.61% at 2.5 suns. Additionally, we found that for these devices fabrication in and exposure to air is required to obtain good diode characteristics. We also show that the morphology of the ZnO nanostructures in the nanocomposite directly impacts device performance. Treatment of the ZnO surface using surfactants increased the open circuit voltage at the expense of the short circuit current; however, there was little effect on overall device efficiency. Because of the inverted geometry of this device that allowed for the use of a silver top contact, the device was not susceptible to oxidative degradation when stored in the dark.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- USDOE; National Renewable Energy Laboratory (NREL), Laboratory Directed Research and Development (LDRD) Program
- DOE Contract Number:
- AC36-08GO28308
- OSTI ID:
- 1344750
- Report Number(s):
- NREL/JA--520-42614
- Journal Information:
- Journal of Physical Chemistry. C, Journal Name: Journal of Physical Chemistry. C Journal Issue: 44 Vol. 111; ISSN 1932-7447
- Publisher:
- American Chemical Society
- Country of Publication:
- United States
- Language:
- English
Similar Records
A comparative study of spin coated and floating film transfer method coated poly (3-hexylthiophene)/poly (3-hexylthiophene)-nanofibers based field effect transistors
Effect of Polymer Processing on the Performance of Poly(3-hexylthiophene)/ZnO Nanorod Photovoltaic Devices
Characteristics of light-induced electron transport from P3HT to ZnO-nanowire field-effect transistors
Journal Article
·
Sun Sep 07 00:00:00 EDT 2014
· Journal of Applied Physics
·
OSTI ID:22314684
Effect of Polymer Processing on the Performance of Poly(3-hexylthiophene)/ZnO Nanorod Photovoltaic Devices
Journal Article
·
Fri Oct 05 00:00:00 EDT 2007
· Journal of Physical Chemistry. C
·
OSTI ID:1344743
Characteristics of light-induced electron transport from P3HT to ZnO-nanowire field-effect transistors
Journal Article
·
Sun Nov 24 23:00:00 EST 2013
· Applied Physics Letters
·
OSTI ID:22253963