Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Lester, Brian T.; Scherzinger, William M.

doi:10.1002/nme.5515

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Journal Article · Thu Jan 19 04:00:00 EST 2017 · International Journal for Numerical Methods in Engineering

DOI:https://doi.org/10.1002/nme.5515· OSTI ID:1343620

^[1]; Scherzinger, William M. ^[1]

Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

A new method for the solution of the non-linear equations forming the core of constitutive model integration is proposed. Specifically, the trust-region method that has been developed in the numerical optimization community is successfully modified for use in implicit integration of elastic-plastic models. Although attention here is restricted to these rate-independent formulations, the proposed approach holds substantial promise for adoption with models incorporating complex physics, multiple inelastic mechanisms, and/or multiphysics. As a first step, the non-quadratic Hosford yield surface is used as a representative case to investigate computationally challenging constitutive models. The theory and implementation are presented, discussed, and compared to other common integration schemes. Multiple boundary value problems are studied and used to verify the proposed algorithm and demonstrate the capabilities of this approach over more common methodologies. Robustness and speed are then investigated and compared to existing algorithms. As a result through these efforts, it is shown that the utilization of a trust-region approach leads to superior performance versus a traditional closest-point projection Newton-Raphson method and comparable speed and robustness to a line search augmented scheme.

View Journal Article

Research Organization:: Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

DOE Contract Number:: AC04-94AL85000

OSTI ID:: 1343620

Report Number(s):: SAND--2016-11942J; 649449

Journal Information:: International Journal for Numerical Methods in Engineering, Journal Name: International Journal for Numerical Methods in Engineering Journal Issue: 3 Vol. 112; ISSN 0029-5981

Publisher:: Wiley

Country of Publication:: United States

Language:: English

References (44)

Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials Yoon, J. W.; Yang, D. Y.; Chung, K. Computer Methods in Applied Mechanics and Engineering, Vol. 174, Issue 1-2 https://doi.org/10.1016/S0045-7825(98)00275-8	journal	May 1999
Evaluation of stress integration algorithms for elastic–plastic constitutive models based on associated and non-associated flow rules Safaei, Mohsen; Lee, Myoung-Gyu; De Waele, Wim Computer Methods in Applied Mechanics and Engineering, Vol. 295 https://doi.org/10.1016/j.cma.2015.07.014	journal	October 2015
Efficient and modular algorithms in modeling finite inelastic deformations: Objective integration, parameter identification and sub-stepping techniques Seifert, T.; Schenk, T.; Schmidt, I. Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issue 17-20 https://doi.org/10.1016/j.cma.2006.12.002	journal	March 2007
Path-dependent failure of inflated aluminum tubes Korkolis, Yannis P.; Kyriakides, Stelios International Journal of Plasticity, Vol. 25, Issue 11 https://doi.org/10.1016/j.ijplas.2008.12.016	journal	November 2009
A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations Simo, J. C.; Ortiz, M. Computer Methods in Applied Mechanics and Engineering, Vol. 49, Issue 2 https://doi.org/10.1016/0045-7825(85)90061-1	journal	June 1985
Linear transfomation-based anisotropic yield functions Barlat, F.; Aretz, H.; Yoon, J. W. International Journal of Plasticity, Vol. 21, Issue 5 https://doi.org/10.1016/j.ijplas.2004.06.004	journal	May 2005
A Generalized Isotropic Yield Criterion Hosford, W. F. Journal of Applied Mechanics, Vol. 39, Issue 2 https://doi.org/10.1115/1.3422732	journal	June 1972
Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis Hughes, Thomas J. R.; Winget, James International Journal for Numerical Methods in Engineering, Vol. 15, Issue 12 https://doi.org/10.1002/nme.1620151210	journal	December 1980
An accurate numerical algorithm for stress integration with finite rotations Flanagan, D. P.; Taylor, L. M. Computer Methods in Applied Mechanics and Engineering, Vol. 62, Issue 3 https://doi.org/10.1016/0045-7825(87)90065-X	journal	June 1987
Time integration scheme for elastoplastic models based on anisotropic strain-rate potentials Rabahallah, Meziane; Balan, Tudor; Bouvier, Salima International Journal for Numerical Methods in Engineering, Vol. 80, Issue 3 https://doi.org/10.1002/nme.2640	journal	October 2009
Operator split methods for the numerical solution of the elastoplastic dynamic problem Ortiz, Miguel; Pinsky, Peter M.; Taylor, Robert L. Computer Methods in Applied Mechanics and Engineering, Vol. 39, Issue 2 https://doi.org/10.1016/0045-7825(83)90018-X	journal	August 1983
Implicit integration procedure for viscoplastic Gurson materials Betegón, C.; del Coz, J. J.; Peñuelas, I. Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issue 44-47 https://doi.org/10.1016/j.cma.2005.12.015	journal	September 2006
Numerical implementation of a shape memory alloy thermomechanical constitutive model using return mapping algorithms Qidwai, M. A.; Lagoudas, D. C. International Journal for Numerical Methods in Engineering, Vol. 47, Issue 6 https://doi.org/10.1002/(SICI)1097-0207(20000228)47:6<1123::AID-NME817>3.0.CO;2-N	journal	February 2000
Plane stress yield function for aluminum alloy sheets—part II: FE formulation and its implementation Yoon, Jeong-Whan; Barlat, Frédéric; Dick, Robert E. International Journal of Plasticity, Vol. 20, Issue 3 https://doi.org/10.1016/S0749-6419(03)00099-8	journal	March 2004
A smoothing trust-region Newton-CG method for minimax problem Feng, Ye; Hongwei, Liu; Shuisheng, Zhou Applied Mathematics and Computation, Vol. 199, Issue 2 https://doi.org/10.1016/j.amc.2007.10.070	journal	June 2008
Recursive Trust-Region Methods for Multiscale Nonlinear Optimization Gratton, Serge; Sartenaer, Annick; Toint, Philippe L. SIAM Journal on Optimization, Vol. 19, Issue 1 https://doi.org/10.1137/050623012	journal	January 2008
A return mapping algorithm for isotropic and anisotropic plasticity models using a line search method Scherzinger, W. M. Computer Methods in Applied Mechanics and Engineering, Vol. 317 https://doi.org/10.1016/j.cma.2016.11.026	journal	April 2017
Line-search methods in general return mapping algorithms with application to porous plasticity Seifert, T.; Schmidt, I. International Journal for Numerical Methods in Engineering, Vol. 73, Issue 10 https://doi.org/10.1002/nme.2131	journal	January 2008
An analysis of a new class of integration algorithms for elastoplastic constitutive relations Ortiz, M.; Simo, J. C. International Journal for Numerical Methods in Engineering, Vol. 23, Issue 3 https://doi.org/10.1002/nme.1620230303	journal	March 1986
Trust region methods for structural optimization using exact second order sensitivity Sunar, M.; Belegundu, A. D. International Journal for Numerical Methods in Engineering, Vol. 32, Issue 2 https://doi.org/10.1002/nme.1620320204	journal	August 1991
A return mapping algorithm for plane stress elastoplasticity Simo, J. C.; Taylor, R. L. International Journal for Numerical Methods in Engineering, Vol. 22, Issue 3 https://doi.org/10.1002/nme.1620220310	journal	March 1986
Implicit algorithm for finite deformation hypoelastic–viscoplasticity in fcc metals Voyiadjis, George Z.; Abed, Farid H. International Journal for Numerical Methods in Engineering, Vol. 67, Issue 7 https://doi.org/10.1002/nme.1655	journal	January 2006
A robust algorithm for finding the eigenvalues and eigenvectors of 3×3 symmetric matrices Scherzinger, W. M.; Dohrmann, C. R. Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 45-48 https://doi.org/10.1016/j.cma.2008.03.031	journal	August 2008
Newton’s Method with a Model Trust Region Modification Sorensen, D. C. SIAM Journal on Numerical Analysis, Vol. 19, Issue 2 https://doi.org/10.1137/0719026	journal	April 1982
On linear transformations of stress tensors for the description of plastic anisotropy Barlat, Frédéric; Yoon, Jeong Whan; Cazacu, Oana International Journal of Plasticity, Vol. 23, Issue 5 https://doi.org/10.1016/j.ijplas.2006.10.001	journal	May 2007
Consistent linearization and finite element implementation of an incrementally objective canonical form return mapping algorithm for large deformation inelasticity Seifert, T.; Maier, G. International Journal for Numerical Methods in Engineering, Vol. 75, Issue 6 https://doi.org/10.1002/nme.2270	journal	August 2008
Levenberg–Marquardt vs Powell’s dogleg method for Gurson–Tvergaard–Needleman plasticity model Shterenlikht, A.; Alexander, N. A. Computer Methods in Applied Mechanics and Engineering, Vol. 237-240 https://doi.org/10.1016/j.cma.2012.04.018	journal	September 2012
Numerical technique in plasticity including solution advancement control Runesson, Kenneth; Samuelsson, Alf; Bernspång, Lars International Journal for Numerical Methods in Engineering, Vol. 22, Issue 3 https://doi.org/10.1002/nme.1620220315	journal	March 1986
On the global convergence of trust region algorithms for unconstrained minimization Powell, M. J. D. Mathematical Programming, Vol. 29, Issue 3 https://doi.org/10.1007/BF02591998	journal	July 1984
A simplified canonical form algorithm with application to porous metal plasticity Keavey, M. A. International Journal for Numerical Methods in Engineering, Vol. 65, Issue 5 https://doi.org/10.1002/nme.1462	journal	January 2005
A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming Yoon, J. International Journal of Plasticity, Vol. 15, Issue 1 https://doi.org/10.1016/S0749-6419(98)00059-X	journal	March 1999
Inflation and burst of aluminum tubes. Part II: An advanced yield function including deformation-induced anisotropy Korkolis, Yannis P.; Kyriakides, Stelios International Journal of Plasticity, Vol. 24, Issue 9 https://doi.org/10.1016/j.ijplas.2008.02.011	journal	September 2008
Orthotropic yield criterion for hexagonal closed packed metals Cazacu, Oana; Plunkett, Brian; Barlat, Frédéric International Journal of Plasticity, Vol. 22, Issue 7 https://doi.org/10.1016/j.ijplas.2005.06.001	journal	July 2006
A general anisotropic yield criterion using bounds and a transformation weighting tensor Karafillis, A. P.; Boyce, M. C. Journal of the Mechanics and Physics of Solids, Vol. 41, Issue 12 https://doi.org/10.1016/0022-5096(93)90073-O	journal	December 1993
State update algorithm for isotropic elastoplasticity by incremental energy minimization: STATE UPDATE ALGORITHM FOR ISOTROPIC ELASTOPLASTICITY BY INCREMENTAL ENERGY MINIMIZATION Nodargi, Nicola A.; Bisegna, Paolo International Journal for Numerical Methods in Engineering, Vol. 105, Issue 3 https://doi.org/10.1002/nme.4966	journal	July 2015
Optimal control of the cylinder wake in the laminar regime by trust-region methods and POD reduced-order models Bergmann, M.; Cordier, L. Journal of Computational Physics, Vol. 227, Issue 16 https://doi.org/10.1016/j.jcp.2008.04.034	journal	August 2008
Constitutive Modeling and Rupture Predictions of Al-6061-T6 Tubes Under Biaxial Loading Paths Korkolis, Y. P.; Kyriakides, S.; Giagmouris, T. Journal of Applied Mechanics, Vol. 77, Issue 6 https://doi.org/10.1115/1.4001940	journal	August 2010
On the formulation of closest-point projection algorithms in elastoplasticity-part II: Globally convergent schemes: ELASTOPLASITICITY-PART II: GLOBALLY CONVERGENT SCHEMES Pérez-Foguet, A.; Armero, F. International Journal for Numerical Methods in Engineering, Vol. 53, Issue 2 https://doi.org/10.1002/nme.279	journal	October 2001
On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material Qidwai, M. A.; Lagoudas, D. C. International Journal of Plasticity, Vol. 16, Issue 10-11 https://doi.org/10.1016/S0749-6419(00)00012-7	journal	January 2000
Calculations of forming limit diagrams Graf, Alejandro; Hosford, William F. Metallurgical Transactions A, Vol. 21, Issue 1 https://doi.org/10.1007/BF02656427	journal	January 1990
Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function Yoon, J.; Barlat, F.; Dick, R. International Journal of Plasticity, Vol. 22, Issue 1 https://doi.org/10.1016/j.ijplas.2005.03.013	journal	January 2006
Universal anisotropic yield criterion based on superquadric functional representation: Part 1. Algorithmic issues and accuracy analysis Dutko, Martin; Perić, Djordje; Owen, D. R. J. Computer Methods in Applied Mechanics and Engineering, Vol. 109, Issue 1-2 https://doi.org/10.1016/0045-7825(93)90225-M	journal	January 1993
Accuracy and stability of integration algorithms for elastoplastic constitutive relations Ortiz, M.; Popov, E. P. International Journal for Numerical Methods in Engineering, Vol. 21, Issue 9 https://doi.org/10.1002/nme.1620210902	journal	September 1985
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals Cazacu, O. International Journal of Plasticity, Vol. 20, Issue 11 https://doi.org/10.1016/j.ijplas.2003.11.021	journal	November 2004

Similar Records

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Journal Article · Wed Jan 18 23:00:00 EST 2017 · International Journal for Numerical Methods in Engineering · OSTI ID:1343055

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Journal Article · Wed Jan 18 23:00:00 EST 2017 · International Journal for Numerical Methods in Engineering · OSTI ID:1340690

Computing a trust region step

Technical Report · Mon Nov 30 23:00:00 EST 1981 · OSTI ID:5255642

Related Subjects

97 MATHEMATICS AND COMPUTING
Hosford yield surface
constitutive model integration
return mapping algorithms
trust-region

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Citation Formats

References (44)

Similar Records

Related Subjects