Chromium in aqueous nitrate plutonium process streams: Corrosion of 316 stainless steel and chromium speciation
- Los Alamos National Lab., NM (United States)
This study was undertaken to determine if chromium +6 could exist in plutonium process solutions under normal operating conditions. Four individual reactions were studied: the rate of dissolution of stainless steel, which is the principal source of chromium in process solutions; the rate of oxidation of chromium +3 to chromium +6 by nitric. acid; and the reduction of chromium +6 back to chromium +3 by reaction with stainless steel and with oxalic acid. The stainless steel corrosion rate was found to increase with increasing nitric acid concentration, increasing hydrofluoric acid concentration, and increasing temperature. Oxidation of chromium +3 to chromium +6 was negligible at room temperature and only became significant in hot concentrated nitric acid. The rate of reduction of chromium +6 back to chromium +3 by reaction with stainless steel or oxalic acid was found to be much greater than the rate of the reverse oxidation reaction. Based on these findings and taking into account normal operating conditions, it was determined that although there would be considerable chromium in plutonium process streams it would rarely be found in the +6 oxidation state and would not exist in the +6 state in the final process waste solutions.
- OSTI ID:
- 126232
- Report Number(s):
- CONF-950402--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Chromium in aqueous nitrate plutonium process streams: Corrosion of 316 stainless steel and chromium speciation
Decontamination of actinides and fission products from stainless steel surfaces