Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Compaction Behavior of Surrogate Degraded Emplaced WIPP Waste

Technical Report ·
DOI:https://doi.org/10.2172/1200652· OSTI ID:1200652

The present study results are focused on laboratory testing of surrogate waste materials. The surrogate wastes correspond to a conservative estimate of degraded Waste Isolation Pilot Plant (WIPP) containers and TRU waste materials at the end of the 10,000 year regulatory period. Testing consists of hydrostatic, triaxial, and uniaxial strain tests performed on surrogate waste recipes that were previously developed by Hansen et al. (1997). These recipes can be divided into materials that simulate 50% and 100% degraded waste by weight. The percent degradation indicates the anticipated amount of iron corrosion, as well as the decomposition of cellulosics, plastics, and rubbers (CPR). Axial, lateral, and volumetric strain and axial, lateral, and pore stress measurements were made. Two unique testing techniques were developed during the course of the experimental program. The first involves the use of dilatometry to measure sample volumetric strain under a hydrostatic condition. Bulk moduli of the samples measured using this technique were consistent with those measured using more conventional methods. The second technique involved performing triaxial tests under lateral strain control. By limiting the lateral strain to zero by controlling the applied confining pressure while loading the specimen axially in compression, one can maintain a right-circular cylindrical geometry even under large deformations. This technique is preferred over standard triaxial testing methods which result in inhomogeneous deformation or “barreling”. Manifestations of the inhomogeneous deformation included non-uniform stress states, as well as unrealistic Poisson’s ratios (> 0.5) or those that vary significantly along the length of the specimen. Zero lateral strain controlled tests yield a more uniform stress state, and admissible and uniform values of Poisson’s ratio.

Research Organization:
Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
Sponsoring Organization:
USDOE National Nuclear Security Administration (NNSA); USDOE Office of Environmental Management (EM)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
1200652
Report Number(s):
SAND--2014-1897; 505234
Country of Publication:
United States
Language:
English

Similar Records

Improved Compaction Experiments and Modeling of Waste Isolation Pilot Plant Standard, Non-degraded, Waste Containers
Technical Report · Thu Jun 01 00:00:00 EDT 2023 · OSTI ID:2430967

Water-Weakening and Time-Dependent Deformation of Organic-Rich Chalks
Journal Article · Fri Aug 04 00:00:00 EDT 2023 · Rock Mechanics and Rock Engineering · OSTI ID:1993643