Light Metals Permanent Mold Casting
- Natural Resources Canada, Hamilton, ON (Canada). CanmetMATERIALS; Advanced Technolog Institute
Current vehicles use mostly ferrous components for structural applications. It is possible to reduce the weight of the vehicle by substituting these parts with those made from light metals such as aluminum and magnesium. Many alloys and manufacturing processes can be used to produce these light metal components and casting is known to be most economical. One of the high integrity casting processes is permanent mold casting which is the focus of this research report. Many aluminum alloy castings used in automotive applications are produced by the sand casting process. Also, aluminum-silicon (Al-Si) alloys are the most widely used alloy systems for automotive applications. It is possible that by using high strength aluminum alloys based on an aluminum-copper (Al-Cu) system and permanent mold casting, the performance of these components can be enhanced significantly. This will also help to further reduce the weight. However, many technological obstacles need to be overcome before using these alloys in automotive applications in an economical way. There is very limited information in the open literature on gravity and low-pressure permanent mold casting of high strength aluminum alloys. This report summarizes the results and issues encountered during the casting trials of high strength aluminum alloy 206.0 (Al-Cu alloy) and moderate strength alloy 535.0 (Al-Mg alloy). Five engineering components were cast by gravity tilt-pour or low pressure permanent mold casting processes at CanmetMATERIALS (CMAT) and two production foundries. The results of the casting trials show that high integrity engineering components can be produced successfully from both alloys if specific processing parameters are used. It was shown that a combination of melt processing and mold temperature is necessary for the elimination of hot tears in both alloys.
- Research Organization:
- Natural Resources Canada, Hamilton, ON (Canada). CanmetMATERIALS
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Office of Technology Development
- Contributing Organization:
- Eck Industries, Inc.; Grenville Castings Limited; Magma Foundry Technologies, Inc.; Alcan International Ltd.; B.S Metallurgy, Inc.; Product Development &Analysis (PDA) LLC
- DOE Contract Number:
- FC36-04GO14230
- OSTI ID:
- 1126472
- Country of Publication:
- United States
- Language:
- English
Similar Records
Light Metals Permanent Mold Casting
Gating of Permanent Molds for ALuminum Casting