Solidification and loss of hydrostaticity in liquid media used for pressure measurements
- San Diego State Univ., San Diego, CA (United States)
- Ames Lab. and Iowa State Univ., Ames, IA (United States)
We carried out a study of the pressure dependence of the solidification temperature in nine pressure transmitting media that are liquid at ambient temperature, under pressures up to 2.3 GPa. These fluids are 1:1 isopentane/n-pentane, 4:6 light mineral oil/n-pentane, 1:1 isoamyl alcohol/n-pentane, 4:1 methanol/ethanol, 1:1 FC72/FC84 (Fluorinert), Daphne 7373, isopentane, and Dow Corning PMX silicone oils 200 and 60,000 cS. We relied on the high sensitivity of the electrical resistivity of Ba(Fe1–xRux)2As2 single crystals to the freezing of the pressure media and cross-checked with corresponding anomalies observed in the resistance of the manganin coil that served as the ambient temperature resistive manometer. In addition to establishing the temperature-pressure line separating the liquid (hydrostatic) and frozen (non-hydrostatic) phases, these data permit rough estimates of the freezing pressure of these media at ambient temperature. As a result, this pressure establishes the extreme limit for the medium to be considered hydrostatic. For higher applied pressures, the medium has to be treated as non-hydrostatic.
- Research Organization:
- Ames Laboratory (AMES), Ames, IA (United States)
- Sponsoring Organization:
- USDOE
- Grant/Contract Number:
- AC02-07CH11358
- OSTI ID:
- 1249336
- Alternate ID(s):
- OSTI ID: 1229920
- Report Number(s):
- IS-J-8942; RSINAK
- Journal Information:
- Review of Scientific Instruments, Vol. 86, Issue 12; ISSN 0034-6748
- Publisher:
- American Institute of Physics (AIP)Copyright Statement
- Country of Publication:
- United States
- Language:
- English
Web of Science
Similar Records
Effects of pressure and ambient species on the orientational ordering in solid C[sub 60]
In situ pressure calibration for piston cylinder cells via ruby fluorescence with fiber optics