Fabrication Control Plan for ORNL RH-LOCA ATF Test Specimens to be Irradiated in the ATR
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
The purpose of this fabrication plan is (1) to summarize the design of a set of rodlets that will be fabricated and then irradiated in the Advanced Test Reactor (ATR) and (2) provide requirements for fabrication and acceptance criteria for inspections of the Light Water Reactor (LWR) – Accident Tolerant Fuels (ATF) rodlet components. The functional and operational (F&OR) requirements for the ATF program are identified in the ATF Test Plan. The scope of this document only covers fabrication and inspections of rodlet components detailed in drawings 604496 and 604497. It does not cover the assembly of these items to form a completed test irradiation assembly or the inspection of the final assembly, which will be included in a separate INL final test assembly specification/inspection document. The controls support the requirements that the test irradiations must be performed safely and that subsequent examinations must provide valid results.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1173094
- Report Number(s):
- INL/EXT-14-31986
- Country of Publication:
- United States
- Language:
- English
Similar Records
Critical processes and parameters in the development of accident tolerant fuels drop-in capsule irradiation tests
Comparison of Subdivided Versus Full-Length Fuel Pin Burnup in the ATF-2 Safety Analysis