skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Detailed analysis of the structural consequences of railgun augumentation

Technical Report ·
OSTI ID:7168418

The advantage of augmenting a plasma railgun is to provide the same driving force on the projectile as in an unaugmented railgun at a lower plasma arc current, thus producing less erosion and barrel damage. However, there are structural consequences to railgun augmentation which must be overcome before the advantages of lower plasma arc currents can be realized. To investigate these consequences, a bolted V-block supporting structure is considered with two cores; unaugmented (a single pair of conducting rails), and augmented (conducting rails augmented by a second tandem set of conductors). For each core, a two-dimensional dynamic finite element structural analysis is performed. The loadings, applied sequentially, consist of the static bolt preload, the plasma pressure behind the projectile, and the magnetic pressure induced by currents flowing in the rails or augmenting conductors. The magnetic pressure induced by currents flowing in the rails or augmenting conductors. A maximum rail current is found for which the unaugmented railgun can be fired without permanent deformation of the gun bore, thus allowing repeated firings. For the augmented railgun, at the same projectile acceleration, large permanent deformations are shown. 7 refs., 41 figs., 2 tabs.

Research Organization:
Sandia National Labs., Albuquerque, NM (USA)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
7168418
Report Number(s):
SAND-88-0617; ON: DE88013800
Resource Relation:
Other Information: Portions of this document are illegible in microfiche products
Country of Publication:
United States
Language:
English

Similar Records

Structural consequences of railgun augmentation
Conference · Fri Jan 01 00:00:00 EST 1988 · OSTI ID:7168418

Structural consequences of railgun augmentation
Journal Article · Sun Jan 01 00:00:00 EST 1989 · IEEE (Institute of Electrical and Electronics Engineers) Transactions on Magnetics; (USA) · OSTI ID:7168418

Design and testing of a 0. 60 caliber, augmented railgun
Conference · Tue Jan 01 00:00:00 EST 1991 · IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States) · OSTI ID:7168418