HNS aluminum linear shaped charge (ALSC) performance study
Technical Report
·
OSTI ID:5303457
A study was performed to determine the HNS conversion process which yields the best material for use in manufacturing aluminum linear shaped charges (ALSC). Destructive testing was performed in two phases. Phase I established optimum standoff for each lot of material, and Phase II evaluated performance under varied temperature conditions. Both optimum standoff and performance were determined by measuring ALSC depth of penetration into an aluminum witness plate. Detonation velocity was also measured.
- Research Organization:
- Mason and Hanger-Silas Mason Co., Inc., Amarillo, TX (USA)
- DOE Contract Number:
- AC04-76DP00487
- OSTI ID:
- 5303457
- Report Number(s):
- MHSMP-80-36
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of four HNS II materials for use in aluminum linear shaped charges. Final report
ALSC cutter. Period covered: January--March 1976. Normal process development endeavor No. 202. [Aluminum sheath linear shaped charge (ALSC)]
Lot qualification procedure for HNS-II ALSC. [For cutting shroud lines on B77]
Technical Report
·
Tue Aug 01 00:00:00 EDT 1978
·
OSTI ID:5303457
ALSC cutter. Period covered: January--March 1976. Normal process development endeavor No. 202. [Aluminum sheath linear shaped charge (ALSC)]
Technical Report
·
Thu Jan 01 00:00:00 EST 1976
·
OSTI ID:5303457
Lot qualification procedure for HNS-II ALSC. [For cutting shroud lines on B77]
Technical Report
·
Sun Jul 01 00:00:00 EDT 1979
·
OSTI ID:5303457