skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Risk analysis of heat recovery steam generator with semi quantitative risk based inspection API 581

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.4945516· OSTI ID:22591155
;  [1];  [2]
  1. Department of Mechanical Engineering, Diponegoro University, Semarang (Indonesia)
  2. Department of Mechanical & Automotive Engineering of Pukyong National University (Korea, Republic of)

Corrosion is a major problem that most often occurs in the power plant. Heat recovery steam generator (HRSG) is an equipment that has a high risk to the power plant. The impact of corrosion damage causing HRSG power plant stops operating. Furthermore, it could be threaten the safety of employees. The Risk Based Inspection (RBI) guidelines by the American Petroleum Institute (API) 58 has been used to risk analysis in the HRSG 1. By using this methodology, the risk that caused by unexpected failure as a function of the probability and consequence of failure can be estimated. This paper presented a case study relating to the risk analysis in the HRSG, starting with a summary of the basic principles and procedures of risk assessment and applying corrosion RBI for process industries. The risk level of each HRSG equipment were analyzed: HP superheater has a medium high risk (4C), HP evaporator has a medium-high risk (4C), and the HP economizer has a medium risk (3C). The results of the risk assessment using semi-quantitative method of standard API 581 based on the existing equipment at medium risk. In the fact, there is no critical problem in the equipment components. Damage mechanisms were prominent throughout the equipment is thinning mechanism. The evaluation of the risk approach was done with the aim of reducing risk by optimizing the risk assessment activities.

OSTI ID:
22591155
Journal Information:
AIP Conference Proceedings, Vol. 1725, Issue 1; Conference: ICAMST 2015: 3. international conference on advanced materials science and technology, Semarang (Indonesia), 6-7 Oct 2015; Other Information: (c) 2016 Author(s); Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English