skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Some Important Aspects of Physical Modelling of Liquefaction in 1-g Shaking Table

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.2963865· OSTI ID:21149008
 [1];  [2]
  1. Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000 (Bangladesh)
  2. Department of Civil Engineering, University of Tokyo (Japan)

Physical modeling of liquefaction in 1-g shaking table and dynamic centrifuge test become very popular to simulate the ground behavior during earthquake motion. 1-g shaking table tests require scaled down model ground which can be prepared in three methods; water sedimentation, moist tamping and dry deposition method. Moist tamping and dry deposition method need saturation of model ground which is expensive and very difficult to achieve. Some model tests were performed in 1-g shaking table to see the influence of preparation method of model ground. Wet tamping and water sedimentation method of ground preparation were compared in these tests. Behavior of level ground and slope were also examined. Slope and level ground model test increased the understanding of excess pore pressure generation in both cases. Wet tamping method has a possibility of not being fully saturated. Pore pressure transducers should be fixed vertically so that it can not settle down during shaking but can move with ground. There was insignificant difference in acceleration and excess pore pressure responses between wet tamping and water sedimentation method in case of level ground. Spiky accelerations were prominent in slope prepared by water sedimentation method. Spiky accelerations were the result of lateral displacement induced dilatancy of soil.

OSTI ID:
21149008
Journal Information:
AIP Conference Proceedings, Vol. 1020, Issue 1; Conference: 2008 seismic engineering conference: Commemorating the 1908 Messina and Reggio Calabria earthquake, Reggio Calabria (Italy), 8-11 Jul 2008; Other Information: DOI: 10.1063/1.2963865; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English