Delayed failure in a shock-loaded silicon carbide
- Royal Military College of Science, Cranfield University, Shrivenham, Swindon, SN6 8LA (United Kingdom)
The shock response of a silicon carbide has been investigated using the methods of plate impact, and monitored using manganin stress gauges mounted so as to be responsive to lateral stress. Close to the impact face, a two-step stress response is observed, indicating the presence of delayed failure at the impact face. As the shock front moves through the target, the failure wave appears to slow, before arresting between 4 and 6 mm from the impact face. Measured shear stresses (ahead of the failure front) are in good agreement with the calculated elastic response, and with similar measurements made by both ourselves in other grades of silicon carbide and other authors. In gauge traces where the failure wave was not observed, a slight decrease in lateral stress (and thus a corresponding increase in shear strength) has been noticed. A similar response in some metals (in combination with recovery work in other ceramics) has led us to suggest that a degree of plastic deformation, in combination with a more brittle response, has occurred.
- OSTI ID:
- 20711712
- Journal Information:
- Journal of Applied Physics, Vol. 97, Issue 11; Other Information: DOI: 10.1063/1.1923161; (c) 2005 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Material strength and inelastic deformation of silicon carbide under shock wave compression
Damage kinetics in silicon carbide