Single-step syngas-to-dimethyl ether processes for optimal productivity, minimal emissions, and natural gas-derived syngas
Process schemes for single-step syngas-to-dimethyl ether (DME) were developed in two stages: (1) the performance of the syngas-to-DME reactor was optimized with respect to the feed gas composition and (2) the optimal reactor feed gas system was integrated with synthesis gas generators. It was shown that the reactor performance is very sensitive to the H{sub 2}:CO ratio in the feed gas. The optimal DME productivity and best material utilization were obtained with a feed gas containing 50% hydrogen and 50% carbon monoxide. In the second phase the syngas generation units considered were CO{sub 2}-methane reformer, steam-methane reformer, methane partial oxidation, and coal gasifier. The integration adjusts the H{sub 2}:CO ratio in natural gas-derived syngas to fit the optimal DME reactor operation and minimizes CO{sub 2} emissions and material loss. The technical feasibility of these schemes was demonstrated by simulations using realistic reactor models, kinetics, and thermodynamics under commercially relevant conditions.
- Research Organization:
- Air Products and Chemicals, Inc., Allentown, PA (US)
- OSTI ID:
- 20003887
- Journal Information:
- Industrial and Engineering Chemistry Research, Vol. 38, Issue 11; Other Information: PBD: Nov 1999; ISSN 0888-5885
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of alternative fuels from coal derived syngas. Topical report: Task 2.2, Demonstration of a one-step slurry-phase process for the production of dimethyl ether/methanol mixtures at the LaPorte Alternative Fuels Development Unit
High-Octane Gasoline from Lignocellulosic Biomass via Syngas and Methanol/Dimethyl Ether Intermediates: 2020 State of Technology