Microstructural effects on high-cycle fatigue-crack initiation in A356.2 casting alloy
The effects of various microconstituents on crack initiation and propagation in high-cycle fatigue (HCF) were investigated in an aluminum casting alloy (A356.2). Fatigue cracking was induced in both axial and bending loading conditions at strain/stress ratios of {minus}1, 0.1, and 0.2. The secondary dendrite arm spacing (SDAS) and porosity (maximum size and density distribution) were quantified in the directionally solidified casting alloy. Using scanning electron microscopy, the authors observed that cracks initiate at near-surface porosity, at oxides, and within the eutectic microconstituents, depending on the SDAS. When the SDAS is greater than {approximately}25 to 28{micro}m, the fatigue cracks initiate from surface and subsurface porosity. When the SDAS is less than {approximately}25 to 28{micro}m, the fatigue cracks initiate from the interdendritic eutectic constituents, where the silicon particles are segregated. Fatigue cracks initiated at oxide inclusions whenever they were near the surface, regardless of the SDAS. The fatigue life of a specimen whose crack initiated at a large eutectic constituent was about equal to that when the crack initiated at a pore or oxide of comparable size.
- Research Organization:
- Univ. of Arizona, Tucson, AZ (US)
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 20002010
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 30, Issue 10; Other Information: PBD: Oct 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Investigation of Advanced Processed Single-Crystal Turbine Blade Alloys. Final report, 16 December 1991-31 December 1995
Enhancements in Magnesium Die Casting Impact Properties