skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Surface Modification of ICF Target Capsules by Pulsed Laser Ablation

Journal Article · · Fusion Science and Technology
DOI:https://doi.org/10.13182/FST15-248· OSTI ID:1305842
 [1];  [2];  [2]
  1. General Atomics, San Diego, CA (United States)
  2. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

Topographical modifications of spherical surfaces are imprinted on National Ignition Facility (NIF) target capsules by extending the capabilities of a recently developed full surface (4π) laser ablation and mapping apparatus. The laser ablation method combines the precision, energy density and long reach of a focused laser beam to pre-impose sinusoidal modulations on the outside surface of High Density Carbon (HDC) capsules and the inside surface of Glow Discharge Polymer (GDP) capsules. Sinusoidal modulations described in this paper have sub-micron to 10’s of microns vertical scale and wavelengths as small as 30 μm and as large as 200 μm. The modulated patterns are created by rastering a focused laser fired at discrete capsule surface locations for a specified number of pulses. The computer program developed to create these raster patterns uses inputs such as laser beam intensity profile, the material removal function, the starting surface figure and the desired surface figure. The patterns are optimized to minimize surface roughness. Lastly, in this paper, simulated surfaces are compared with actual ablated surfaces measured using confocal microscopy.

Research Organization:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Organization:
USDOE
Grant/Contract Number:
AC52-07NA27344; NA0001808
OSTI ID:
1305842
Report Number(s):
LLNL-JRNL-678552
Journal Information:
Fusion Science and Technology, Vol. 70, Issue 2; ISSN 1536-1055
Publisher:
American Nuclear SocietyCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 3 works
Citation information provided by
Web of Science

References (55)

The effects of early time laser drive on hydrodynamic instability growth in National Ignition Facility implosions journal September 2014
Progress towards ignition on the National Ignition Facility journal July 2013
Grain size dependent physical and chemical properties of thick CVD diamond films for high energy density physics experiments journal November 2013
3D Surface Reconstruction of ICF Shells after Full Surface Spheremapping journal May 2006
Fuel gain exceeding unity in an inertially confined fusion implosion journal February 2014
Macromolecular plasma-chemistry: an emerging field of polymer science journal August 2004
Crystallographic anisotropy of wear on a polycrystalline diamond surface journal June 2006
Time scale effects in laser material removal: a review journal November 2004
Fabrication of Thin Walled Glow Discharge Polymer Shells journal July 2000
Progress toward ignition at the National Ignition Facility journal November 2013
Onset of Hydrodynamic Mix in High-Velocity, Highly Compressed Inertial Confinement Fusion Implosions journal August 2013
Hot-spot mix in ignition-scale implosions on the NIF journal May 2012
Grain size dependent mechanical properties of nanocrystalline diamond films grown by hot-filament CVD journal May 2009
Reduced instability growth with high-adiabat high-foot implosions at the National Ignition Facility journal July 2014
Progress in indirect and direct-drive planar experiments on hydrodynamic instabilities at the ablation front journal December 2014
Automation of NIF Target Characterization and Laser Ablation of Domes Using the 4pi System journal May 2015
Point design targets, specifications, and requirements for the 2010 ignition campaign on the National Ignition Facility journal May 2011
Experimental reduction of laser imprinting and Rayleigh–Taylor growth in spherically compressed, medium-Z-doped plastic targets journal June 2012
2D X-Ray Radiography of Imploding Capsules at the National Ignition Facility journal May 2014
Rayleigh-Taylor Growth Measurements in the Acceleration Phase of Spherical Implosions on OMEGA journal September 2009
Controlled incorporation of mid-to-high Z transition metals in CVD diamond journal May 2010
An in-flight radiography platform to measure hydrodynamic instability growth in inertial confinement fusion capsules at the National Ignition Facility journal July 2014
Diamond Ablators for Inertial Confinement Fusion journal May 2006
Ablation front Rayleigh–Taylor growth experiments in spherically convergent geometry journal May 2000
Progress in 2 mm Glow Discharge Polymer Mandrel Development for NIF journal March 2004
Design of a High-Foot High-Adiabat ICF Capsule for the National Ignition Facility journal February 2014
First Measurements of Hydrodynamic Instability Growth in Indirectly Driven Implosions at Ignition-Relevant Conditions on the National Ignition Facility journal May 2014
Implosion hydrodynamics of fast ignition targets journal May 2005
Dynamic symmetry of indirectly driven inertial confinement fusion capsules on the National Ignition Facility journal May 2014
X‐ray radiographic imaging of hydrodynamic phenomena in radiation‐driven materials—Shock propagation, material compression, and shear flow* journal May 1994
Hot-Spot Mix in Ignition-Scale Inertial Confinement Fusion Targets journal July 2013
The impact of laser plasma interactions on three-dimensional drive symmetry in inertial confinement fusion implosions journal July 2014
Very-high-growth-factor planar ablative Rayleigh-Taylor experiments journal May 2007
Instability growth seeded by oxygen in CH shells on the National Ignition Facility journal March 2015
Planarization of Isolated Defects on ICF Target Capsule Surfaces by Pulsed Laser Ablation journal September 2016
Convergence Properties of the Nelder--Mead Simplex Method in Low Dimensions journal January 1998
Fabrication of Polymer Shells Using a Depolymerizable Mandrel journal December 1995
High-mode Rayleigh-Taylor growth in NIF ignition capsules journal June 2010
The PAMS/GDP Process for Production of ICF Target Mandrels journal July 1997
A survey of pulse shape options for a revised plastic ablator ignition design journal November 2014
Effects of coating pressure on the thermal and mechanical properties of glow discharge polymer films journal July 2011
Ultrasmooth plasma polymerized coatings for laser fusion targets journal September 1981
Seeing Shell Wall Fluctuations journal July 2000
Gas Etching to Obtain Germanium Doped CH x Microshells Compatible with the Laser Megajoule Target Specifications journal May 2006
Diamond spheres for inertial confinement fusion journal September 2009
Overview of National Ignition Facility Capsule Metrology journal May 2009
Development of the indirect‐drive approach to inertial confinement fusion and the target physics basis for ignition and gain journal November 1995
The physics basis for ignition using indirect-drive targets on the National Ignition Facility journal February 2004
Visualization of target inspection data at the National Ignition Facility journal December 2012
Complete Surface Mapping of ICF Shells journal March 2004
Hydrodynamic instability growth and mix experiments at the National Ignition Facility journal May 2014
Suppression of the Rayleigh-Taylor Instability due to Self-Radiation in a Multiablation Target journal May 2004
Preparation of Hollow Shell ICF Targets Using A Depolymerizing Mandrel journal January 1994
Crystallographic anisotropy of growth and etch rates of CVD diamond journal May 2009
Automated ICF Capsule Characterization Using Confocal Surface Profilometry journal April 2013

Cited By (1)

The effect of axial ion parameters on the properties of glow discharge polymer in T 2 B/H 2 plasma journal February 2018