Characterization of neutron-irradiated HT-UPS steel by high-energy X-ray diffraction microscopy

Zhang, Xuan; Park, Jun-Sang; Almer, Jonathan; Li, Meimei

doi:10.1016/j.jnucmat.2015.11.063

Title: Characterization of neutron-irradiated HT-UPS steel by high-energy X-ray diffraction microscopy

Journal Article · Fri Apr 01 00:00:00 EDT 2016 · Journal of Nuclear Materials

DOI:https://doi.org/10.1016/j.jnucmat.2015.11.063· OSTI ID:1252053

Zhang, Xuan; Park, Jun-Sang; Almer, Jonathan; Li, Meimei

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

Grant/Contract Number:: AC02-06CH11357; APS

OSTI ID:: 1252053

Journal Information:: Journal of Nuclear Materials, Journal Name: Journal of Nuclear Materials Vol. 471 Journal Issue: C; ISSN 0022-3115

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

Citation Metrics:

Cited by: 9 works

Citation information provided by
Web of Science

References (46)

New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging Ludwig, W.; King, A.; Reischig, P. Materials Science and Engineering: A, Vol. 524, Issue 1-2 https://doi.org/10.1016/j.msea.2009.04.009	journal	October 2009
Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals: A numerical approach Lavergne, F.; Brenner, R.; Sab, K. Computational Materials Science, Vol. 77 https://doi.org/10.1016/j.commatsci.2013.04.061	journal	September 2013
Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis Materials Characterization, Vol. 62, Issue 7 https://doi.org/10.1016/j.matchar.2011.04.020	journal	July 2011
On the Roles of Grain Size Dispersion and Microscale Hall–Petch Relation on the Plastic Behavior of Polycrystalline Metals Berbenni, Stéphane; Wagner, Francis; Allain-Bonasso, Nathalie MATERIALS TRANSACTIONS, Vol. 55, Issue 1 https://doi.org/10.2320/matertrans.MA201307	journal	January 2014
A fast methodology to determine the characteristics of thousands of grains using three-dimensional X-ray diffraction. II. Volume, centre-of-mass position, crystallographic orientation and strain state of grains Sharma, Hemant; Huizenga, Richard M.; Offerman, S. Erik Journal of Applied Crystallography, Vol. 45, Issue 4 https://doi.org/10.1107/S0021889812025599	journal	July 2012
Dose dependence of the microstructural evolution in neutron-irradiated austenitic stainless steel Zinkle, S. J.; Maziasz, P. J.; Stoller, R. E. Journal of Nuclear Materials, Vol. 206, Issue 2-3 https://doi.org/10.1016/0022-3115(93)90128-L	journal	November 1993
High-energy diffraction microscopy at the advanced photon source Lienert, U.; Li, S. F.; Hefferan, C. M. JOM, Vol. 63, Issue 7 https://doi.org/10.1007/s11837-011-0116-0	journal	July 2011
Stress and deformation heterogeneity in individual grains within polycrystals subjected to fully reversed cyclic loading Wong, Su Leen; Obstalecki, Mark; Miller, Matthew P. Journal of the Mechanics and Physics of Solids, Vol. 79 https://doi.org/10.1016/j.jmps.2015.03.010	journal	June 2015
Creep behavior of a new cast austenitic alloy Shingledecker, John P.; Maziasz, Philip J.; Evans, Neal D. International Journal of Pressure Vessels and Piping, Vol. 84, Issue 1-2 https://doi.org/10.1016/j.ijpvp.2006.09.014	journal	January 2007
A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution Zhu, Linli; Shi, Sanqiang; Lu, Ke Acta Materialia, Vol. 60, Issue 16 https://doi.org/10.1016/j.actamat.2012.06.059	journal	September 2012
On the impact of grain size distribution on the plastic behaviour of polycrystalline metals Raeisinia, B.; Sinclair, C. W.; Poole, W. J. Modelling and Simulation in Materials Science and Engineering, Vol. 16, Issue 2 https://doi.org/10.1088/0965-0393/16/2/025001	journal	January 2008
Grain-size-dependent non-monotonic lattice parameter variation in nanocrystalline W: The role of non-equilibrium grain boundary structure Srivastav, Ajeet K.; Chawake, Niraj; Murty, B. S. Scripta Materialia, Vol. 98 https://doi.org/10.1016/j.scriptamat.2014.11.005	journal	March 2015
Three-Dimensional Characterization of Microstructure by Electron Back-Scatter Diffraction Rollett, Anthony D.; Lee, S. -B.; Campman, R. Annual Review of Materials Research, Vol. 37, Issue 1 https://doi.org/10.1146/annurev.matsci.37.052506.084401	journal	August 2007
Precipitation in creep resistant austenitic stainless steels Sourmail, T. Materials Science and Technology, Vol. 17, Issue 1 https://doi.org/10.1179/026708301101508972	journal	January 2001
In situ characterization of Grade 92 steel during tensile deformation using concurrent high energy X-ray diffraction and small angle X-ray scattering Wang, Leyun; Li, Meimei; Almer, Jonathan Journal of Nuclear Materials, Vol. 440, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.063	journal	September 2013
Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations Pokharel, Reeju; Lind, Jonathan; Kanjarla, Anand K. Annual Review of Condensed Matter Physics, Vol. 5, Issue 1 https://doi.org/10.1146/annurev-conmatphys-031113-133846	journal	March 2014
Structural refinements of the individual grains within polycrystals and powders Schmidt, S.; Poulsen, H. F.; Vaughan, G. B. M. Journal of Applied Crystallography, Vol. 36, Issue 2 https://doi.org/10.1107/S0021889803002383	journal	March 2003
Developing an austenitic stainless steel for improved performance in advanced fossil power facilities Maziasz, Philip J. JOM, Vol. 41, Issue 7 https://doi.org/10.1007/BF03220265	journal	July 1989
Quantitative grain-scale ferroic domain volume fractions and domain switching strains from three-dimensional X-ray diffraction data Oddershede, Jette; Majkut, Marta; Cao, Qinghua Journal of Applied Crystallography, Vol. 48, Issue 3 https://doi.org/10.1107/S1600576715007669	journal	May 2015
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen Turner, T. J.; Shade, P. A.; Schuren, J. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1 https://doi.org/10.1088/0965-0393/21/1/015002	journal	November 2012
Lattice expansion and contraction in nanocrystalline yttria-stabilized zirconia powders Ponnuchamy, Mohan B.; Gandhi, Ashutosh S. Scripta Materialia, Vol. 83 https://doi.org/10.1016/j.scriptamat.2014.03.028	journal	July 2014
Microstructural characterization of polycrystalline materials by synchrotron X-rays Wang, Leyun; Li, Meimei; Almer, Jonathan Frontiers of Materials Science, Vol. 7, Issue 2 https://doi.org/10.1007/s11706-013-0201-0	journal	May 2013
Investigation of radiation damage by X-ray diffraction Ehrhart, Peter Journal of Nuclear Materials, Vol. 216 https://doi.org/10.1016/0022-3115(94)90012-4	journal	October 1994
Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis Journal of Applied Crystallography, Vol. 43, Issue 3 https://doi.org/10.1107/S0021889810012963	journal	April 2010
A fast methodology to determine the characteristics of thousands of grains using three-dimensional X-ray diffraction. I. Overlapping diffraction peaks and parameters of the experimental setup Sharma, Hemant; Huizenga, Richard M.; Offerman, S. Erik Journal of Applied Crystallography, Vol. 45, Issue 4 https://doi.org/10.1107/S0021889812025563	journal	July 2012
Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D Berger, Alfons; Herwegh, Marco; Schwarz, Jens-Oliver Journal of Structural Geology, Vol. 33, Issue 12 https://doi.org/10.1016/j.jsg.2011.07.002	journal	December 2011
Impact of the grain size distribution on the yield stress of heterogeneous materials Berbenni, S.; Favier, V.; Berveiller, M. International Journal of Plasticity, Vol. 23, Issue 1 https://doi.org/10.1016/j.ijplas.2006.03.004	journal	January 2007
Recent developments in stainless steels Lo, K. H.; Shek, C. H.; Lai, J. K. L. Materials Science and Engineering: R: Reports, Vol. 65, Issue 4-6 https://doi.org/10.1016/j.mser.2009.03.001	journal	May 2009
The Deformation and Ageing of Mild Steel: III Discussion of Results Hall, E. O. Proceedings of the Physical Society. Section B, Vol. 64, Issue 9 https://doi.org/10.1088/0370-1301/64/9/303	journal	September 1951
Non-monotonic lattice parameter variation with crystallite size in nanocrystalline solids Rane, Gayatri Koyar; Welzel, Udo; Meka, Sai Ramudu Acta Materialia, Vol. 61, Issue 12 https://doi.org/10.1016/j.actamat.2013.04.021	journal	July 2013
Overview of microstructural evolution in neutron-irradiated austenitic stainless steels Maziasz, P. J. Journal of Nuclear Materials, Vol. 205 https://doi.org/10.1016/0022-3115(93)90077-C	journal	October 1993
Serial sectioning methods for 3D investigations in materials science Zankel, Armin; Wagner, Julian; Poelt, Peter Micron, Vol. 62 https://doi.org/10.1016/j.micron.2014.03.002	journal	July 2014
Effect of bimodal distribution in ferrite grain sizes on the tensile properties of low-carbon steels Patra, S.; Hasan, Sk. Md.; Narasaiah, N. Materials Science and Engineering: A, Vol. 538 https://doi.org/10.1016/j.msea.2011.12.114	journal	March 2012
Mechanical twinning and detwinning in pure Ti during loading and unloading – An in situ high-energy X-ray diffraction microscopy study Wang, L.; Lind, J.; Phukan, H. Scripta Materialia, Vol. 92 https://doi.org/10.1016/j.scriptamat.2014.08.008	journal	December 2014
Computational modeling of f.c.c. deformation textures over Rodrigues' space Kumar, A.; Dawson, P. R. Acta Materialia, Vol. 48, Issue 10 https://doi.org/10.1016/S1359-6454(00)00044-6	journal	June 2000
Tomographic atom probe characterization of the microstructure of a cold worked 316 austenitic stainless steel after neutron irradiation Etienne, A.; Radiguet, B.; Pareige, P. Journal of Nuclear Materials, Vol. 382, Issue 1 https://doi.org/10.1016/j.jnucmat.2008.09.015	journal	November 2008
Comparison between a near-field and a far-field indexing approach for characterization of a polycrystalline sample volume containing more than 1500 grains Nervo, Laura; King, Andrew; Wright, Jonathan P. Journal of Applied Crystallography, Vol. 47, Issue 4 https://doi.org/10.1107/S160057671401406X	journal	August 2014
High-energy synchrotron x-ray techniques for studying irradiated materials Park, Jun-Sang; Zhang, Xuan; Sharma, Hemant Journal of Materials Research, Vol. 30, Issue 9 https://doi.org/10.1557/jmr.2015.50	journal	March 2015
Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals Lim, H.; Carroll, J. D.; Battaile, C. C. International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.05.004	journal	September 2014
Effect of grain size distribution and texture on the cold extrusion behavior and mechanical properties of AZ31 Mg alloy Chao, H. Y.; Yang, Y.; Wang, X. Materials Science and Engineering: A, Vol. 528, Issue 9 https://doi.org/10.1016/j.msea.2011.01.020	journal	April 2011
Coupled effects of grain size distributions and crystallographic textures on the plastic behaviour of IF steels Nicaise, Nicolas; Berbenni, Stéphane; Wagner, Francis International Journal of Plasticity, Vol. 27, Issue 2 https://doi.org/10.1016/j.ijplas.2010.05.001	journal	February 2011
Impact of grain size distribution on the multiscale mechanical behavior of nanocrystalline materials Liu, Yingguang; Zhou, Jianqiu; Ling, Xiang Materials Science and Engineering: A, Vol. 527, Issue 7-8 https://doi.org/10.1016/j.msea.2009.11.033	journal	March 2010
Strain gradient plasticity analysis of the influence of grain size and distribution on the yield strength in polycrystals Dahlberg, Carl F. O.; Faleskog, Jonas European Journal of Mechanics - A/Solids, Vol. 44 https://doi.org/10.1016/j.euromechsol.2013.09.004	journal	March 2014
An introduction to three-dimensional X-ray diffraction microscopy Poulsen, Henning Friis Journal of Applied Crystallography, Vol. 45, Issue 6, p. 1084-1097 https://doi.org/10.1107/S0021889812039143	journal	October 2012
The effect of dose rate on the response of austenitic stainless steels to neutron radiation Allen, T. R.; Cole, J. I.; Trybus, C. L. Journal of Nuclear Materials, Vol. 348, Issue 1-2 https://doi.org/10.1016/j.jnucmat.2005.09.011	journal	January 2006
Dislocation evolution during tensile deformation in ferritic–martensitic steels revealed by high-energy X-rays Li, Meimei; Wang, Leyun; Almer, Jonathan D. Acta Materialia, Vol. 76 https://doi.org/10.1016/j.actamat.2014.05.026	journal	September 2014

Similar Records

Characterization of neutron-irradiated HT-UPS steel by high-energy X-ray diffraction microscopy

Journal Article · Fri Apr 01 00:00:00 EDT 2016 · Journal of Nuclear Materials · OSTI ID:1252053

Zhang, Xuan; Park, Jun-Sang; Almer, Jonathan; +1 more

In-situ high-energy X-ray characterization of neutron irradiated HT-UPS stainless steel under tensile deformation

Journal Article · Fri Jul 06 00:00:00 EDT 2018 · Acta Materialia · OSTI ID:1252053

Xu, Chi; Zhang, Xuan; Chen, Yiren; +5 more

High energy X-ray diffraction study of the relationship between the macroscopic mechanical properties and microstructure of irradiated HT-9 steel

Journal Article · Fri Mar 25 00:00:00 EDT 2016 · Journal of Nuclear Materials · OSTI ID:1252053

Tomchik, C.; Almer, J.; Anderoglu, O.; +6 more

Title: Characterization of neutron-irradiated HT-UPS steel by high-energy X-ray diffraction microscopy

Citation Formats

References (46)

Similar Records

Related Subjects