skip to main content

Title: Ranchero Armature Test LA-19.4-CT-3: PBX-9501 Explosive with no smoothing layer. Firing point 88, 9/16/13

LA-19.4-CT-3 (CT-3) was the third camera test in a series beginning in 1/11, which diagnose the performance of 6 mm thick, 6061 T-0 Al Ranchero armatures. [The test LA-43-CT-2 (CT-2) is described in LA-UR-14-21983.] The goal of CT-3 was to verify that PBX-9501, with 18 mm point spacing and no smoothing layer, could be used for Ranchero generator armatures in place of PBXN-110, which had been used in all previous Ranchero applications. CT-1 and CT-2 both had 43 cm long slapper detonator systems imbedded in the cast PBXN-110 explosive, but manufacturing a charge for a similar 9501 test was not cost effective. Instead, a single cylinder of 9501, 19.368 cm long and 15.494 cm (6.100”)in diameter, had a groove machined to accommodate a row of 11 SE-1 detonators with 18 mm point spacing along the mid-plane of the cylinder. The expansion of the armature looks like a slapper assembly along almost ½ of the circumference, and provides adequate proof of concept. Removing the smoother from PBXN-110-driven armatures increased the armature velocity from 3.1 mm/μs to 3.3 mm/μs, as seen in CT-2, and the velocity measured on CT-3 increased to 3.8 mm/μs. In addition, the camera records show that the surfacemore » of the armature is smooth enough, and free from ruptures for an expansion of greater that 2X. The advantage of using 9501 is that it precludes concerns about blow-outs seen when bubbles are left in the cast material, and gives extra velocity. The disadvantage is that the machined explosives are more expensive.« less
 [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1]
  1. Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Publication Date:
OSTI Identifier:
Report Number(s):
DOE Contract Number:
Resource Type:
Technical Report
Research Org:
Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
Sponsoring Org:
Country of Publication:
United States