A dislocation-based, strain–gradient–plasticity strengthening model for deformation processed metal-metal composites
- Ames Laboratory (AMES), Ames, IA (United States)
Deformation processed metal–metal composites (DMMCs) are high-strength, high-electrical conductivity composites developed by severe plastic deformation of two ductile metal phases. The extraordinarily high strength of DMMCs is underestimated using the rule of mixture (or volumetric weighted average) of conventionally work-hardened metals. In this article, a dislocation-density-based, strain–gradient–plasticity model is proposed to relate the strain-gradient effect with the geometrically necessary dislocations emanating from the interface to better predict the strength of DMMCs. The model prediction was compared with the experimental findings of Cu–Nb, Cu–Ta, and Al–Ti DMMC systems to verify the applicability of the new model. The results show that this model predicts the strength of DMMCs better than the rule-of-mixture model. The strain-gradient effect, responsible for the exceptionally high strength of heavily cold worked DMMCs, is dominant at large deformation strain since its characteristic microstructure length is comparable with the intrinsic material length.
- Research Organization:
- Ames Laboratory (AMES), Ames, IA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- DE-AC02-07CH11358
- OSTI ID:
- 1132276
- Report Number(s):
- IS-J-8191
- Journal Information:
- Journal of Materials Science, Vol. 49, Issue 7; ISSN 0022-2461
- Publisher:
- Springer
- Country of Publication:
- United States
- Language:
- English
Latest Developments in Modeling and Characterization of Joining Metal Based Hybrid Materials
|
journal | May 2018 |
Review on slip transmission criteria in experiments and crystal plasticity models
|
journal | November 2015 |
Multiscale analysis of the low-velocity impact behavior of ceramic nanoparticle-reinforced metal matrix nanocomposite beams by micromechanics and finite element approaches
|
journal | July 2019 |
Review on Slip Transmission Criteria in Experiments and Crystal Plasticity Models | text | January 2015 |
Similar Records
Modeling the electrical resistivity of deformation processed metal-metal composites
Al-Ca and Al-Fe metal-metal composite strength, conductivity, and microstructure relationships