Model based design of an automotive-scale, metal hydride hydrogen storage system.
- General Motors R&D
Sandia and General Motors have successfully designed, fabricated, and experimentally operated a vehicle-scale hydrogen storage system using the complex metal hydride sodium alanate. Over the 6 year project, the team tackled the primary barriers associated with storage and delivery of hydrogen including mass, volume, efficiency and cost. The result was the hydrogen storage demonstration system design. The key technologies developed for this hydrogen storage system include optimal heat exchange designs, thermal properties enhancement, a unique catalytic hydrogen burner and energy efficient control schemes. The prototype system designed, built, and operated to demonstrate these technologies consists of four identical hydrogen storage modules with a total hydrogen capacity of 3 kg. Each module consists of twelve stainless steel tubes that contain the enhanced sodium alanate. The tubes are arranged in a staggered, 4 x 3 array and enclosed by a steel shell to form a shell and tube heat exchanger. Temperature control during hydrogen absorption and desorption is accomplished by circulating a heat transfer fluid through each module shell. For desorption, heat is provided by the catalytic oxidation of hydrogen within a high efficiency, compact heat exchanger. The heater was designed to transfer up to 30 kW of heat from the catalytic reaction to the circulating heat transfer fluid. The demonstration system module design and the system control strategies were enabled by experiment-based, computational simulations that included heat and mass transfer coupled with chemical kinetics. Module heat exchange systems were optimized using multi-dimensional models of coupled fluid dynamics and heat transfer. Chemical kinetics models were coupled with both heat and mass transfer calculations to design the sodium alanate vessels. Fluid flow distribution was a key aspect of the design for the hydrogen storage modules and computational simulations were used to balance heat transfer with fluid pressure requirements. An overview of the hydrogen storage system will be given, and examples of these models and simulation results will be described and related to component design. In addition, comparisons of demonstration system experimental results to model predictions will be reported.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1030410
- Report Number(s):
- SAND2010-7877C; TRN: US201124%%186
- Resource Relation:
- Conference: Proposed for presentation at the AIChE 2010 Annual Meeting held November 7-12, 2010 in Salt Lake City, UT.
- Country of Publication:
- United States
- Language:
- English
Similar Records
INTEGRATED HYDROGEN STORAGE SYSTEM MODEL
Performance characterization of a hydrogen catalytic heater.
Related Subjects
08 HYDROGEN
VEHICLES
ABSORPTION
BURNERS
DESIGN
DESORPTION
EFFICIENCY
FLUID FLOW
HEAT EXCHANGERS
HEAT TRANSFER
HEAT TRANSFER FLUIDS
HEATERS
HYDRIDES
HYDROGEN
HYDROGEN STORAGE
KINETICS
MASS TRANSFER
OXIDATION
SODIUM
STAINLESS STEELS
STEELS
TEMPERATURE CONTROL
THERMODYNAMIC PROPERTIES