394 Search Results

Thermocapacitive cycles are promising thermal and energy storage cycles using supercapacitors, which can achieve thermal efficiencies over 50% of the Carnot limit. There is a lack of work investigating the use of thermocapacitive effects in practical heat pumps. Here, this paper explores the design of thermocapacitive cells with higher temperature changes to be better suited for heat pumping applications. To evaluate the cell designs on temperature changes, pouch type cells are prototyped and modeled, and tested using a micro-calorimeter. A peak adiabatic temperature span of a LiCl aqueous cell is 2.7 °C. By arranging the cells in a cascade manner,more » the projected adiabatic temperature span can reach up to 12 °C with a heating density of 15 kW m⁻³ and an energy storage density of 0.83 kWh m⁻³. Models predict that this could be increased to 30 °C and 1.65 kWh m⁻³ through improvements to cell capacitance and thermopower. Incorporating the energy storage capabilities into heating and cooling devices can be beneficial to building thermal management as energy storage becomes increasingly important for energy system integration.« less

Operations of multi-reservoir systems are challenged in-part by the interplay of complex physical processes functioning within the watershed. The employment of intelligent systems can be of aid by linking environmental sensing, information technology, data analytics, simulation and decision support to achieve a data-to-decision flow of information. A further challenge is that watershed resources are managed for multiple purposes requiring some level of coordination among numerous resource managers, asset operators and users. System intelligence in this context relies on shared community platforms (data portals, community models), and coordinated communication between decision makers. Opportunities to enrich watershed intelligence has been the subjectmore » of a roadmapping exercise for the Department of Energy’s Water Power Technologies Office which has relied on broad stakeholder engagement. Initial phases of engagement involved personal interviews and a series of virtual group meetings, which focused on identifying opportunities to improve the intelligence of the physical infrastructure within our watersheds—examples of feedback include improved sensing of snowpack and runoff, data standards for facilitated data sharing, and better forecasting tools. The latter phase of engagement involved the conduct of a case study in the Upper Colorado River basin where key stakeholders were interviewed to map how their decisions are informed by intelligence from other basin stakeholders. Our presentation will highlight the interdisciplinary flow of information in complex watershed systems and identify physical and institutional opportunities toward the strategic operation of water infrastructure.« less

Gridded climate data products have facilitated research in climate and ecology by providing meteorological data continuously across large spatial scales. However, the sensitivity of scientific outcomes to dataset choice remains poorly understood, and evaluation using station-based records can favor datasets built heavily on weather stations. Here, we evaluate seven high-resolution daily gridded datasets covering the contiguous United States using independent meteorology from the FLUXNET2015 dataset, with a focus on the implications of dataset choice for process-based tree growth modeling. We find that gridded products tend to capture temperature accurately while consistently overestimating the magnitude and frequency of precipitation and itsmore » extremes. Moreover, datasets vary in how they define a ‘day,’ which significantly affects temporal alignment with FLUXNET2015 observations. Despite differences among the datasets, the interannual variability in tree ring simulations is insensitive to dataset choice, likely because daily-scale biases are averaged out through accumulated growth across several months. However, inaccuracies in temperature and precipitation can significantly bias modeled xylem cell production, with systematically higher annual precipitation in the gridded datasets leading to greater xylem production compared to simulations using in situ data. Our results suggest that model applications, especially those that integrate to time scales longer than one day, are likely insensitive to climate dataset choice, but applications that are sensitive to daily climate variations or to absolute climate values need to carefully consider biases in gridded climate products.« less

Aquifer thermal energy storage (ATES) is a concept that can help to address heating and cooling needs through the use of the subsurface as a seasonal thermal energy storage (STES) system. Over 2800 ATES systems have been deployed with storage temperatures typically below 25 °C and only a few with higher temperatures (>40 °C), which would increase the energy density and utility of the stored thermal fluids. Until now, only a few high-temperature aquifer thermal energy storage (HT-ATES) projects have been initiated and are still in operation. These HT-ATES projects have encountered a range of technical and non-technical challenges. Thismore » study reviews ten such projects: four in Germany and six in the Netherlands. The non-technical issues include public acceptance, a lack of regulatory framework for these systems, managing overlapping uses of the subsurface, managing changes with the providers and off-takers of thermal energy, and obtaining financing to implement these projects. Common technical issues include geological factors such as incomplete characterization of the subsurface and reservoir heterogeneity; geochemical issues such as mineral scaling, corrosion, and biofouling; lower than expected thermal recovery; and issues with system design and reliability. This review highlights benefits and challenges faced by HT-ATES projects with the goal to use the lessons learned to improve the siting, design, development, and operation of such systems. Recommendations include improved initial subsurface site characterization, use of coupled process models to optimize system design and predict system performance, cascaded uses of stored thermal energy to better utilize the stored heat, monitoring networks to provide feedback on system performance, and expanded system scale to allow for continued operation even when maintenance of some system components is required. Techno-economic modeling and risk analysis could be used to optimize such HT-ATES project design and identify key factors that will affect sustained economic viability. In addition, design flexibility is important for these systems to allow for changing conditions regarding the supply and demand of thermal energy. Adopting these findings should improve the performance and reduce the risks for future HT-ATES projects worldwide.« less

An experimental discharge from the DIII-D tokamak is modeled using the SOLPS-ITER code suite and compared against measurements in the pumped and relatively closed upper divertor. Uncertainties of boundary plasma simulations are identified by attempting to match code inputs to experimental conditions, including iteratively solving transport coefficients to match upstream experimental profiles using varying quantities of core particle flux, different pumping models, and various assumptions of ion thermal transport. Simulated boundary conditions for particle injection at the core interface are shown to be relevant to the plasma solution at the divertor targets, even if upstream transport is modified so thatmore » plasma profiles are comparatively similar, although seperatrix density is not held constant. When upstream plasma profiles are matched to experimental measurements by varying diffusive transport coefficients, using either poloidally symmetric or ballooning structure, the model finds a majority of injected energy being transported radially off the computational domain, in conflict with experimental radiated power measurements and heat flux measurements at the divertor target. Imposing a maximum thermal diffusivity or radially shifting the experimental separatrix location of the fitted profiles to increase power conducted to the targets by increasing the upstream electron temperature does not significantly modify this result. Including a thermalizing plenum volume in the simulation domain is shown to maintain the experimental volumetric pumping rate without knowing the neutral energy distribution incident on the pump duct a priori. By modifying transport parameters to match different assumptions for ion temperature, downstream neutral pressure changes by more than a factor of two, suggesting that attention to ion thermal transport may be a critical parameter for simulations to accurately resolve recycling and neutral transport, particularly in a closed divertor geometry. In addition to quantifying various modeling uncertainties, this work motivates both further experimental study and modeling improvements to improve predictive capabilities.« less

Optical identification of liquid droplets, aerosols, or thin films is important for many applications. While reference spectra are sometimes available for such measurements, they are not always applicable to the observed spectrum or the given sample morphology. Reference spectra for many forms can be modeled, however, if the n/k vectors (real and imaginary refractive indices) are available. In previous work we have reported protocols to determine the n/k vectors for dozens of liquids, primarily in the mid-infrared (MIR) spectral range from 7500 to 400 cm^–1. In this work we extend the spectral range into the near-infrared (NIR) region, demonstrating amore » method to measure and merge the data sets to create composite n/k data ranging from 10 000 to 400 cm^–1 (1.0 to 25 µm) with absorbance fidelity spanning over four orders of magnitude, and vastly improved signal-to-noise in the NIR. The precision of the composite data is evaluated for three different liquids, focusing primarily on the steps for converting the raw absorbance spectra to k values. The variability in both MIR and NIR data as well as in the final n/k vectors is also investigated for several liquids. For typical liquids, the overall variability (reported as 2σ) in the final n and k-vectors is determined to be ∼0.4% and 3%, respectively. Finally, the derived n/k data are used to calculate absorbance spectra for aerosol droplets, showing marginal variability due to the typical measurement errors in the final n/k vectors.« less

Aerosol effective radiative forcing critically influences climate projections but remains poorly constrained. Using the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) v1 configuration, we assess the sensitivity of the radiative forcing due to anthropogenic aerosol changes using a simplified prescribed aerosol scheme (SPA) derived from E3SM v3. Nudged simulations at 3 and 12 km horizontal grid spacings reveal a more negative aerosol forcing than the reference 100 km E3SM v3 whence the SPA properties are derived. The resulting globally averaged aerosol forcing signal is largely due to aerosol–cloud interactions and exhibits little overall resolution sensitivity, while hints of resolution sensitivity appearmore » regionally between the 3 and 12 km runs. While the default SPA scheme overestimates cloud droplet dependence on aerosols, parameterization adjustments in the activation process reconcile forcing estimates with the reference model. Our results demonstrate the ability to use a prescribed aerosol scheme to hold aerosol forcing to a desired strength across resolutions.« less

Several unknowns remain surrounding marine Carbon Dioxide Removal (mCDR) monitoring, reporting, and verification (MRV) practices and capabilities. Current in-situ sensor technology is limited (primarily pH and pCO₂), requiring calculations and assumptions to estimate changes in carbonate chemistry parameters, including total alkalinity (TA). Considering that cost, energy consumption, and accuracy of commercial sensors can vary by orders of magnitude, understanding how well existing sensors perform in an mCDR context is important for this emerging community. Likewise, documenting sensor limitations and how relatively simple models can optimize sensor deployments will improve MRV efforts and support protocol development. Here we (1) compare performancemore » a variety of commercially available sensors in a blind mesocosm experiment simulating ocean alkalinity enhancement (OAE), and how sensor performance impacted carbonate chemistry estimates; (2) evaluate if sensors can distinguish the OAE signal from natural variability during a small scale OAE field test in Sequim Bay, WA, USA, and (3) use an idealized ocean biogeochemistry model to explore optimal sensor network design based on (1) and (2). Our mesocosm results indicate that correctly constraining pH uncertainty will be critical for accurate TA estimates with current sensor technology compared to the less impactful variation caused by uncertainty in pCO₂ (pH data that are presented throughout are reported on the total scale (pH_T) unless otherwise noted). Our pilot field test demonstrated that sensors were capable of distinguishing mCDR signatures from natural variability under optimal real-world conditions. Idealized modeling simulations of the field test showed that a range of sparse and dense (3 to 100) sensors sampling areas of detectable increases will underestimate the net change in surface pH by at least 35–55%, at both realistic and highly elevated alkalinity input levels. We also highlight the limitations of current sensing technology for MRV, and the importance of ocean biogeochemistry models as critical tools for predicting when and where mCDR signals will be detectable using available sensors. Overall, our findings suggest that commercially available pCO₂ sensors and some pH sensors will form an important backbone for mCDR MRV tasks, though complete MRV characterization will require these data to be used in combination with other tools.« less

Isoprene is an abundant volatile organic compound emitted from broadleaf forests. Under low nitric oxide concentrations, isoprene is photochemically oxidized to form gas-phase isoprene epoxydiols (IEPOX). In the presence of acidified sulfate aerosols, IEPOX enhances the secondary organic aerosol (SOA) formation. Predictions of IEPOX-SOA in regional-scale models, e.g., the Community Multiscale Air Quality Model (CMAQ), are uncertain due to homogeneous aerosol assumptions, underpredictions of water uptake (hygroscopicity), and aerosol surface area. Here, we used experimental measurements of IEPOX-SOA tracers, 2-methyltetrols (2-MT) and 2-methyltetrol sulfates (2-MTS), formed at initial IEPOX-to-inorganic sulfate ratios ranging from 1–10.5, at ∼50% relative humidity to constrainmore » key IEPOX-SOA parameters: phase separation, organic shell diffusivity (D_org), acidity, hygroscopic growth, mass accommodation, and kinetics. The base CMAQ parametrization overpredicted experimental IEPOX-SOA with an average normalized mean bias (NMB_average) of 1.63. CMAQ with phase separation underpredicted IEPOX-SOA (NMB_average = −0.71). Using the phase-separated model, CMAQ model performance was optimized (NMB_average = 0.077) with an increased D_org = 2 × 10^–16 m²s^–1 and increased rate constants (k_2-MT = 1 × 10^–3 M² s^–1, k_2-MTS = 8.83 × 10^–3 M² s^–1). The optimized model explicitly accounted for hygroscopic growth by utilizing experimentally derived growth rates, improving aerosol surface area predictions. Our model highlights the importance of the aerosol mixing state (homogeneous versus phase-separated), aerosol size dynamics, and hygroscopic growth in modeling heterogeneous reactive uptake of IEPOX.« less

Decisions on public health interventions to control infectious diseases are often informed by computational models. Interpreting the predicted outcomes of a public health decision requires not only high-quality modelling but also an ethical framework for assessing the benefits and harms associated with different options. The design and specification of ethical frameworks matured independently of computational modelling, so many values recognized as important for ethical decision-making are missing from computational models. We demonstrate a proof-of-concept approach to incorporate multiple public health values into the evaluation of a simple computational model for vaccination against a pathogen such as SARS-CoV-2. By examining amore » bounded space of alternative prioritizations of three values relevant to public health ethics (aggregate clinical burden, equity in clinical burden, equity in adverse effects from vaccination), we identify value trade-offs, where the outcomes of optimal strategies differ depending on the ethical framework. This work demonstrates an approach to incorporating diverse values into decision criteria used to evaluate outcomes of models of infectious disease interventions.« less