10 Search Results

Capturing CO₂ at trace concentration remains a critical challenge in sustainable carbon management via adsorption, as conventional adsorbents suffer from low CO₂ selectivity, poor moisture tolerance, and energy-intensive regeneration requirements. Here, we report a hierarchical Ba²⁺-exchanged silicoaluminophosphate (Ba²⁺-CSAPO-34) composite synthesized via confined-space crystallization within an activated carbon matrix. Comprehensive characterization revealed a confined nucleation mechanism and the successful incorporation of Ba²⁺ active sites within the SAPO-34 framework, achieved via a two-step liquid ion-exchange protocol. The core-shell architecture combines the selective CO₂ binding of Ba²⁺-functionalized SAPO-34 with the hydrophobic protection of the carbon shell. Fixed-bed adsorption tests demonstrated strong CO₂ bindingmore » (at 500-2500 ppm), no roll-up, and effective suppression of water affinity, while maintaining high selectivity even at 90% relative humidity. A phenomenological adsorption model, validated against dynamic breakthrough data, accurately predicted dynamic adsorption behavior under real-world operating conditions, enabling rational process design for direct air capture (DAC) and closed-loop life support systems. Furthermore, these results establish Ba²⁺-CSAPO-34 as a scalable, moisture-resistant adsorbent that addresses key limitations in trace CO₂ capture, advancing practical implementation of carbon removal technologies.« less

Abstract Per‐ and polyfluoroalkyl substances (PFAS) are omniphobic and exceptionally stable, making them ideal for a wide range of materials applications. However, as “forever chemicals”, their exceptional persistence and bioaccumulation have generated an increasing amount of environmental and health concerns, prompting the search for fluorine‐free alternatives. Siloxane‐based materials are therefore interesting to examine as PFAS alternatives due to their low surface energy and hydrophobicity but suffer from hydrolytic instability of Si─O linkages. To address this challenge, a novel methacrylate monomer, 3‐[tris(trimethylsilyl)silyl]propyl methacrylate (M‐silyl), is designed containing Si─Si bonds rather than Si─O bonds of siloxanes. Polymers derived from M‐silyl (P‐silyl) is prepared by controlled freemore » radical polymerization and compared with their siloxane analogues after coating on silicon wafers. Contact angle (CA) measurements confirmed P‐silyl to be hydrophobic (advancing/receding water CA = 109.7°/83.0°), with a low‐hysteresis for oil (lyophobic) (hexadecane CA hysteresis = 2.0°), comparable to its siloxane‐based counterpart. Importantly, P‐silyl maintained these surface properties after exposure to acidic or basic conditions, while siloxane analogues lost hydrophobicity. Consequently, the incorporation of Si ─ Si linkages into the design of the polymer enables chemically stable, fluorine‐free alternatives for water‐repellent and low hysteresis surface coatings and advances the design of fluorine‐free functional materials.« less

Solid-liquid interfaces are central to a range of interesting phenomena including catalysis, heterogeneous nucleation, water desalination, and biomolecular assembly. While three-dimensional Fast Force Mapping (3D FFM) has emerged as a technique for resolving interfacial solution structure at the molecular scale, key challenges for data interpretation persist, most notably regarding the influence of the probe on the measured structure. Using the mica-water system as a case study, we investigate the effect of hydrophilic and hydrophobic probes on interfacial solution structure measured by 3D FFM. Data from hydrophilic silicon-based probes are in good agreement with molecular dynamics simulations, wherein the innermost watermore » molecules adsorb preferentially at the surface ditrigonal cavity sites followed by two subsequent hydration layers. In contrast, the hydrophobic carbon-based probes detect vertical oscillatory features, but do not show lateral patterning that matches the underlying mica lattice. At high ionic strength, up to six of these oscillatory features are observed extending 2 nm into the solution phase with an average spacing of 0.29 ± (0.04) nm. Further, we also determine that the repulsive hydration force between mica and the hydrophilic probe depends on the nature and concentration of ions in solution. Specifically, solutions with stronger ion-water and ion-ion interactions increase the interfacial viscosity, which results in a stronger repulsive hydration force as the probe approaches the surface. Based on these observations, we present a scheme for controlling the outcomes of particle attachment and aggregation by varying the solution conditions to tune the hydration force.« less

The diversification of platform chemicals is key to today’s petroleum industry. Likewise, the flourishing of tomorrow’s biorefineries will rely on molecules with next-generation properties from biomass. Herein, we explore this opportunity with a novel approach to monomers with custom property enhancements. Cyclic diacids with alkyl and aromatic decorations were synthesized from muconic acid by Diels-Alder cycloaddition and copolymerized with hexamethylenediamine and adipic acid to yield polyamides with built-in hydrophobicity and flame retardancy. Testing shows a 70% reduction in water uptake and doubling of char production while largely retaining other key properties of the parent Nylon-6,6. In conclusion, the present approachmore » can be generalized to access a wide range of performance-advantaged polyamides.« less

Magnetic-core/gold-shell nanoparticles (MAuNPs) are of interest for enabling rapid and portable detection of trace adulterants in complex media. Gold coating provides biocompatibility and facile functionalization, and a magnetic core affords analyte concentration and controlled deposition onto substrates for surface-enhanced Raman spectroscopy. Iron oxide cores were synthesized and coated with gold by reduction of HAuCl4 by NH2OH. MAuNPs were grafted with polyethylene glycol (PEG) and/or functionalized with 4-mercaptobenzoic acid (4-MBA) and examined using a variety of microscopic, spectroscopic, magnetometric, and scattering techniques. For MAuNPs grafted with both PEG and 4-MBA, the order in which they were grafted impacted not only themore » graft density of the individual ligands, but also the overall graft density. Significant Raman signal enhancement of the model analyte, 4-MBA, was observed. This enhancement demonstrates the functionality of MAuNPs in direct detection of trace contaminants. The magnetic deposition rate of MAuNPs in chloroform and water was explored. The presence of 4-MBA slowed the mass deposition rate, and it was postulated that the rate disparity originated from differing NP-substrate surface interactions. These findings emphasize the importance of ligand choice in reference to the medium, target analyte, and substrate material, as well as functionalization procedure in the design of similar sensing platforms.« less

Stable hydration in perfluorinated polyelectrolyte membranes such as Nafion is essential to maintain good ion conductivity and manage permeation, especially in vapor-fed devices where water content depends on relative humidity in a gas stream. Extensive studies in the literature have shown that Nafion hydration in water vapor is controlled by its interfacial transport resistance. Nafion forms a fluorine-rich layer at the polymer-gas interface, and it has been proposed that this layer blocks water transport due to its hydrophobicity. To develop a molecular-level description of the physics underlying transport resistance in this system, we have performed a computational reaction-diffusion kinetics studymore » of water evaporation from Nafion. Two distinct models are examined, one mimicking the blocking function proposed in the literature and the other assuming that there is no blocking, treating instead water evaporation as a dynamic balance between uptake from the gas and desorption from the polymer surface. Simulation results are compared to time-dependent infrared data over a range of 100-0% relative humidity from the literature. Only the dynamic model successfully reproduces experimental observations. This indicates that the physical nature of interfacial transport resistance is not slow diffusion across an interfacial layer; rather, it is due to the competition between dehydration and rehydration. The simulation data provide details on the accompanying water distributions throughout the membrane and on interfacial kinetics, showing that they are characterized by strong fluctuations.« less

In hydrophobic mini- and microchannels, slug flow with moving contact lines is typically generated under various two-phase flow conditions. There is a significant pressure drop in this flow pattern with moving contact lines, which is closely related to the dynamic contact angles. Researchers have investigated dynamic contact angles experimentally for decades, but due to the limitations of visualization techniques, these experiments have typically been conducted in low Weber number regions (We < 10^–3). In this study, we clearly visualized the dynamic contact angles of a liquid slug in high Weber number regions (10^–3 < We <1) via synchrotron X-ray imagingmore » with high temporal (~1000 fps) and spatial (~ 2 μm/pixel) resolutions. We precisely measured the pressure drop with moving contact lines in a hydrophobic minichannel (inner diameter = 1.018 mm). On the basis of our experimental data, we verified previous correlations for dynamic contact angles and explored the relationship between pressure drop with moving contact lines and dynamic contact angles.« less

Scale formation presents an enormous cost to the global economy. Classical nucleation theory dictates that to reduce the heterogeneous nucleation of scale, the surface should have low surface energy and be as smooth as possible. Past approaches have focused on lowering surface energy via the use of hydrophobic coatings and have created atomically smooth interfaces to eliminate nucleation sites, or both, via the infusion of low-surface-energy lubricants into rough superhydrophobic substrates. Although lubricant-based surfaces are promising candidates for antiscaling, lubricant drainage inhibits their utilization. Here, we develop methodologies to deposit slippery omniphobic covalently attached liquids (SOCAL) on arbitrary substrates. Similarmore » to lubricant-based surfaces, SOCAL has ultralow roughness and surface energy, enabling low nucleation rates and eliminating the need to replenish the lubricant. To enable SOCAL coating on metals, we investigated the surface chemistry required to ensure high-quality functionalization as measured by ultralow contact angle hysteresis (<3°). Using a multilayer deposition approach, we first electrophoretically deposit (EPD) silicon dioxide (SiO₂) as an intermediate layer between the metallic substrate and SOCAL. The necessity of EPD SiO₂ is to smooth (<10 nm roughness) as well as to enable the proper surface chemistry for SOCAL bonding. To characterize antiscaling performance, we utilized calcium sulfate (CaSO₄) scale tests, showing a 20× reduction in scale deposition rate than untreated metallic substrates. Descaling tests revealed that SOCAL dramatically decreases scale adhesion, resulting in rapid removal of scale buildup. Furthermore, our work not only demonstrates a robust methodology for depositing antiscaling SOCAL coatings on metals but also develops design guidelines for the creation of antifouling coatings for alternate applications such as biofouling and high-temperature coking.« less

In this paper, an effective method to functionalize chitosan with 4-hexyloxyphenol (HP) under homogeneous reaction conditions was developed using laccase as the catalyst. The resulting copolymer was characterized for chemical structure, grafted-HP content, surface morphology, thermal stability, antioxidant capacity, hydrophobic properties and tensile strength. Solid-state ¹³C NMR spectrum confirmed the incorporation of HP onto chitosan. X-ray diffraction (XRD) showed a decrease in the degree of crystallinity for laccase/HP treated chitosan compared to pure chitosan. The grafted-HP content in laccase/HP-treated chitosan first increased and then declined with increase of the initial HP/chitosan ratio. A heterogeneous surface with spherical particles on themore » laccase/HP treated chitosan was observed by environmental scanning electron microscopy (ESEM) and scanning probe microscopy (SPM). The laccase/HP treatment of chitosan improved the thermal stability of copolymer. More significantly, the HP functionalized chitosan showed greatly improved ABTS⁺ and DPPH radicals scavenging capacity, compared with pure chitosan. The hydrophobicity property of the HP functionalized chitosan also significantly increased although its tensile strength decreased. Finally, this new type of composite with double functionalities (i.e., antioxidant and hydrophobic) could potentially be used as food packaging materials or coating agents.« less

We report a novel surface modification technique for grafting alkyl methacrylate monomers from commercial poly(ether sulfone) (PES) nanofiltration membranes is developed through a combination of helium and oxygen atmospheric pressure plasma treatment followed by Activators Regenerated by Electron Transfer (ARGET) Atom Transfer Radical Polymerization (ATRP). The resulting membrane surfaces show degree of grafting increases of 28%, 94%, and 270% for methyl methacrylate (C1), hexyl methacrylate (C6), and stearyl methacrylate (C18), respectively, when characterized with Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy. Scanning Electron Microscopy and Atomic Force Microscopy (AFM) show a rippled, fibrous morphology for the PES membranes grafted withmore » C18 and reinforced through molecular dynamics simulations. AFM of the PES membranes grafted with C18 show an increase of ~ 23% in root-mean square (RMS) roughness as well as 4x higher adhesion force when probed with a hydrophobic gold cantilever tip when compared with the unmodified PES membranes, confirming a successful surface grafting reaction and increase in surface hydrophobicity, respectively. This technique allows enhanced synthesis of polymer grafted membranes using relatively green reaction solvent and enables “structure-by-design” surface morphology control with future applications in membrane separation processes such as organic solvent nanofiltration, gas separations, and desalination.« less