194 Search Results

High-entropy alloys (HEAs) provide uniquely tunable structural and electronic properties that enable robust electrocatalysis. While compositional manipulation of HEAs is well-known, systematically controlling the crystalline phase and morphology remains a challenge that could provide new avenues for controlling reactive sites and physical properties. Here, we show the preferential stabilization of mixed fcc/bcc to fcc phases by controlling the Au content in quinary AuPdFeCoNi HEA nanoparticles. This systematic structural and compositional control, when investigated with an ensemble of electronic, X-ray synchrotron, and surface techniques, allows us to identify the critical short- (few-Å) and medium- (6–10 Å) range structural motifs that delivermore » exceptional hydrogen evolution reaction (HER) catalysis. Specifically, these HEAs exhibit both outstanding durability (240 h) and high mass activity (50 A/mg_PGM) normalized to noble metal content, outperforming commercial Pt/C (3.18 A/mg_PGM). This structural control over HEA morphology, and its direct association with changes in specific metallic oxidation states and pair–pair atomic structural features, provides new means and strategies for finely designing robust and sustainable electrocatalysts with a majority nonprecious metal composition.« less

This paper highlights how the singlet and triplet amide ligand centered (^1,3LC) and interligand charge transfer (^1,3ICT) states in (carbene)M(amide), M = Cu, Au (cMa) complexes influence the excited state properties when the triplet states are close in energy. To that end we prepared a set of five cMa complexes, in which the amide (i.e., 5H-benzo[b]carbazole, H-BnCz) was kept constant giving a ³LC energy of ca. 2.15 eV. Four different carbene ligands were selected to develop M_BnCz^Carbene complexes which have energies for the ICT state that vary from being either markedly higher, lower, or close to the energy of themore » ³LC state on the amide ligand. Steady-state and time-resolved spectroscopic studies show that the emission spectrum of the cMa complex mirrors the phosphorescence of the parent H-BnCz amide and has a luminescence decay lifetime in the millisecond regime when the lowest energy excited state is ³LC. When the lowest energy states are ^1,3ICT in nature, the emission band is broad and featureless, giving a lifetime in the nanosecond regime. As the ³LC and ^1,3ICT states have comparable energies, dynamic equilibrium between the states is observed with the luminescence consisting of a mixture of ³LC and ^1,3ICT transitions. The measured lifetime of this equilibrating system is between 45 and 350 μs depending on the solvent, for both copper- and gold-based cMa complexes. Furthermore, these complexes demonstrate the ability to “park” the excited state population in the ³LC state, allowing it to act as a reservoir for thermally activated emission, while still maintaining a very rapid equilibrium between LC and ICT states.« less

The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au⁺) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI₃)/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au⁺ ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10⁻¹¹ to 10⁻¹⁰ cm² s⁻¹ and are subsequently reduced at the cathode as Au⁰ clusters,more » resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au⁰, revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.« less

Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10^–22 and ∼10^–18 cm²/s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemicallymore » induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.« less

Two-dimensional (2D) semiconductors are highly promising candidates for thin-film transistor applications due to their scalability, transferability, atomic thickness, and relatively high carrier mobility. However, a substantial performance gap remains between individual devices based on single-crystalline 2D films and wafer-scale integrated circuits, primarily due to defects introduced during conventional fabrication processes. Here, we report a diamond-assisted electrode transfer technique for the van der Waals integration of wafer-scale prefabricated electrode arrays onto 2D materials, enabling scalable electronics and optoelectronics. Implemented on metal–organic chemical vapor deposition-grown monolayer molybdenum disulfide, this method forms ultraclean metal–semiconductor interfaces, yielding field-effect transistors with excellent ohmic contacts, amore » low contact resistance of 400 Ω·μm, and a Schottky barrier height of only 9 meV. Furthermore, we demonstrate a scalable transistor array on monolayer molybdenum disulfide with excellent device performance uniformity, achieving an average field-effect mobility of 30 cm² V^–1 s^–1 and an on/off current ratio exceeding 105. Additionally, high photocurrent and responsivity were demonstrated in the array devices, showing their potential for excellent image detection. We further demonstrate the versatility of this technique by fabricating a Schottky diode array through a single-step transfer of asymmetric electrodes─low work function aluminum and high work function gold─onto monolayer tungsten diselenide. This approach provides a clean, effective solution for contact engineering in 2D materials, offering a viable pathway toward wafer-scale, high-performance 2D electronics, optoelectronics, and integrated circuits.« less

The addition of palladium (Pd) to preformed gold nanoparticles (Au NPs) enables the formation of core‐shell structures with enhanced catalytic performance in oxidation reactions. However, predicting the precise palladium content required to achieve maximum catalytic activity remains difficult based on current understanding. Herein, Pd was systematically introduced onto titania‐supported Au NPs (2, 6, and 10 nm) to evaluate their performance in benzyl alcohol oxidation. A volcano‐like trend in catalytic activity was observed, where activity increased with Pd addition, peaked, and then declined. The Pd loading required for maximum activity depended on Au NP size: ≈40 at% Pd/Au for 2.6 nm,more » ≈20 at% Pd/Au for 6.4 nm, and ≈12.5 at% Pd/Au for 10.6 nm. For Au NPs > 6 nm, peak activity aligned with monolayer Pd coverage, while for smaller NPs (2–3 nm), optimal Pd content was below monolayer predictions. X‐ray absorption spectroscopy revealed a core‐shell structure at low Pd content, but higher Pd loadings led to Pd diffusion into the Au core. This structural transformation likely caused activity decline, indicating that AuPd alloying negatively impacts catalysis. These results highlight that core‐shell Au@Pd catalysts outperform AuPd alloys and provide crucial insights for designing highly active bimetallic catalysts.« less

Defective crystals with distinct properties have been discovered in many systems. However, the growth mechanism of defective crystals is still poorly understood. Here, in this work, using a 5-fold twinned gold (Au) nanocrystal (NC) as a model system, three new coalescence pathways involving detwinning or twinning have been uncovered through atomic-scale dynamic observations in an aberration-corrected transmission electron microscope coupled with atomistic simulations. This demonstrates that beyond crystal size, coalescence growth dynamics involving 5-fold twins (5-FTs) are highly dependent on crystal defect density and the approach pathways of the crystals. When a 5-FT encounters a smaller 5-FT or a smallermore » NC in a face-to-face way, a new, larger 5-FT is produced at a relatively fast coalescence growth rate; while in a corner-to-corner way, the coalescence dynamics are more retarded and sluggish, which is conducive to the formation of complex multitwined structures rather than 5-FTs. This highlights that the planar defect density and crystal approach pathway influence the coalescence dynamics of crystals containing 5-FT. Moreover, a column-by-column grain boundary (GB) migration mechanism, which results in bent GBs, was also unveiled during the crystal coalescence process. These results enrich the general understanding of the crystal growth theory and provide new insights into the controllable fabrication of 5-FTs by crystal coalescence mechanisms.« less

PdAu/SiO₂ catalysts were synthesized by strong electrostatic adsorption (SEA) and characterized by TEM, DRIFTS, XRD, XAS, and O₂-TPD. The use of group 1 alkali salt solutions to control pH during SEA syntheses led to uptake of alkali metals observed reductions in the densities of terminal silanol groups of the SiO₂ support. In the absence of alkali metals, PdAu/SiO₂ catalyzes oxidative C-N bond formation between methanol and dimethylamine (DMA), yielding dimethylformamide (DMF) with ∼95 % carbon selectivity (CO₂ ∼5 %) at temperatures below 413 K. When Na, K, and Cs were present on the catalyst, methyl formate (MF) and tetramethylurea (TMU)more » were observed as additional products (combined ∼30 % carbon selectivity) while only TMU was detected for the Li-promoted catalyst. Total coupling product rate increased for promoted samples in the order Li < Na < Cs < K, and the apparent kinetics over the Cs-promoted catalyst were distinct from those over the alkali-free catalyst as the apparent reaction order with respect to DMA decreased and the apparent activation energy increased. Finally, this work demonstrates the sensitivity of oxidative coupling reactions to alkali metal promoters and the opportunity to achieve alkali promotion of metal catalysts during SEA synthesis.« less

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work functionmore » and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.« less

Colloidal crystal engineering with DNA is a powerful way of generating a wide variety of crystals spanning over 90 different symmetries. However, in many cases, crystals with well-defined habits are difficult, if not impossible, to make, in part due to rapid crystal defect formation and propagation. This is especially true in the case of face-centered cubic (FCC) structures. Herein, we report a strategy that uses formamide as a chemical modulator to slow down colloidal crystal growth, which decreases defect formation and yields higher-quality crystals. Formamide forms hydrogen bonds with DNA bases and destabilizes the DNA duplex; in the context ofmore » colloidal crystallization, formamide leads to the disassembly of undercoordinated particles (defect architectures) and facilitates their reassembly into structures with the maximum number of nearest-neighbor contacts and DNA bonds. Here, when targeting an FCC lattice comprised of DNA-modified spherical 20 nm particles, formamide promotes the formation of its Wulff polyhedron (a truncated octahedron), never observed before in colloidal crystal engineering with DNA. Importantly, kinetic habits, including tetrahedra, octahedra, icosahedra, and decahedra, are also observed depending on formamide concentration.« less