4 Search Results

The Z Machine at Sandia National Laboratories is a pulsed power facility for high-energy density physics experiments that can shock materials to extreme temperatures and pressures through a focused energy release of up to ~ 25 MJ in < 100 nanoseconds. It has been in operation for more than two decades and conducts up to ~ 100 experiments, or “shots,” per year. Based on a set of 74 known shot times from 2018, we determined that Z Machine shots produce detectable ~ 3–17 Hz ground motion 12 km away at the Albuquerque Seismological Laboratory, New Mexico (ANMO), borehole seismograph, withmore » peak signal at ~ 7 Hz. The known shot waveforms were used to create a three-component template, leading to the detection of 2339 Z Machine shots since 1998 through single-station cross-correlation. Local seismic magnitude estimates range from local magnitude (M_L) —2 to —1.3 and indicate that only a small fraction of the shot energy is transmitted by seismic phases observable at 12 km distance. The most recent major facility renovation, which was intended to decrease mechanical dissipation, is associated with an abrupt decrease in observed seismic amplitudes at ANMO despite stable maximum shot energy. The highly repetitive impulsive sources are well suited to coda-wave interferometry to investigate time-dependent velocity structures. Relative velocity variations (dv/v) show an annual cycle with amplitude of ~ 0.2%. Local minima are observed in the late spring, and dv/v increases through the summer monsoon rainfall, possibly reflecting patchy saturation as rainfall infiltrates near the eastern edge of the Albuquerque basin. Importantly, the cumulative results demonstrate that forensic seismology can provide insight into long-term operation of facilities such as pulsed-power laboratories, and that their recurring signals may be valuable for studies of time-dependent structure« less

The earthquake swarm accompanying the January 2022 Hunga Tonga-Hunga Ha'apai (HTHH) volcanic eruption includes a large number of posteruptive moderate-magnitude seismic events and presents a unique opportunity to use remote monitoring methods to characterize and compare seismic activity with other historical caldera-forming eruptions. We compute improved epicentroid locations, magnitudes, and regional moment tensors of seismic events from this earthquake swarm using regional to teleseismic surface-wave cross correlation and waveform modeling. Precise relative locations of 91 seismic events derived from 59,047 intermediate-period Rayleigh- and Love-wave cross-correlation measurements collapse into a small area surrounding the volcano and exhibit a southeastern time-dependent migration.more » Regional moment tensors and observed waveforms indicate that these events have a similar mechanism and exhibit a strong positive compensated linear vector dipole component. Precise relative magnitudes agree with regional moment tensor moment magnitude ($$M_w$$) estimates while also showing that event sizes and frequency increase during the days after the eruption followed by a period of several weeks of less frequent seismicity of a similar size. The combined information from visual observation and early geologic models indicate that the observed seismicity may be the result of a complex series of events that occurred after the explosive eruption on 15 January, possibly involving rapid resupply of the magma chamber shortly after the eruption and additional faulting and instability in the following weeks. In addition, we identify and characterize an $$M_w$$ 4.5 event five days before the paroxysmal explosion on 15 January, indicating that additional seismic events preceding the main eruption could have been identified with improved local monitoring. As a result, our analysis of the HTHH eruption sequence demonstrates the value of potentially utilizing teleseismic surface-wave cross correlation and waveform modeling methods to assist in the detailed analysis of remote volcanic eruption sequences.« less

Infrasound data from arrays can be used to detect, locate, and quantify a variety of natural and anthropogenic sources from local to remote distances. However, many array processing methods use a single broad frequency range to process the data, which can lead to signals of interest being missed due to the choice of frequency limits or simultaneous clutter sources. In this work, we introduce a new open-source Python code that processes infrasound array data in multiple sequential narrow frequency bands using the least-squares approach. We test our algorithm on a few examples of natural sources (volcanic eruptions, mass movements, andmore » bolides) for a variety of array configurations. Our method reduces the need to choose frequency limits for processing, which may result in missed signals, and it is parallelized to decrease the computational burden. Improvements of our narrow-band least-squares algorithm over broad-band least-squares processing include the ability to distinguish between multiple simultaneous sources if distinct in their frequency content (e.g., microbarom or surf vs. volcanic eruption), the ability to track changes in frequency content of a signal through time, and a decreased need to fine-tune frequency limits for processing. We incorporate a measure of planarity of the wavefield across the array (sigma tau, στ) as well as the ability to utilize the robust least trimmed squares algorithm to improve signal processing and insight into array performance. Our implementation allows for more detailed characterization of infrasound signals recorded at arrays that can improve monitoring and enhance research capabilities.« less

Fracture systems are important pathways for fluid and solute transport and exert a critical influence on the hydraulic properties of aquifers and reservoirs. Therefore, detailed knowledge of fracture locations, connections, and evolution is crucial for both groundwater and energy applications (e.g., enhanced geothermal, oil and gas recovery, carbon sequestration, and wastewater injection). The innovative combination of distributed acoustic sensing (DAS) and ambient seismic noise techniques has the potential to detect and characterize fracture systems at high-spatial and temporal resolution without an active source. To test this, we conducted a multiphysics field experiment at Blue Canyon Dome, New Mexico. A novelmore » energetic material developed by Sandia National Laboratories was used to generate fractures in two separate stimulations. Ambient noise was recorded before and after each stimulation using fiber-optic cables installed in the outer annulus of four boreholes surrounding the stimulation hole at a radius of 1.2 m. The Python package MSNoise was used to compute crosscorrelations and measure changes in velocity between each time period relative to the initial (prestimulation) time period. The majority of channel pairs showed a velocity reduction (average –3% relative velocity change) following both stimulations. We used a 3D Bayesian tomography approach to resolve spatial variations by utilizing differences between channel pairs. Results showed that the greatest velocity reduction was concentrated near the center of the test area and suggested the presence of a near-vertical fracture, oriented northeast to southwest for depths >19 m below ground surface and extending slightly to the southwest corner. Finally, these results were generally consistent with crosshole seismic tomography time-lapse images. DAS technology provides valuable sensing capability and — when used with a passive seismic approach — shows great promise for monitoring and characterization of fractured-rock systems.« less