3 Search Results

The interaction between cracks and inclusions plays an important role in the fracture behavior of particulate composites. It is commonly recognized that an inclusion stiffer than the matrix tends to deflect an approaching crack away while a softer inclusion attracts the crack. Here, we demonstrate by analytical modeling and numerical simulations that the crack-inclusion interaction can be tuned by an applied T-stress. Under a sufficiently large compressive applied T-stress, cracks can be attracted to stiffer inclusions while repelled by softer ones, therefore reversing the conventional trend. Potential applications of this work include composite electrodes in lithium-ion batteries and hydraulic fracturing.

The potential advantages of lithium metal anodes have received widespread attention (highest capacity, lowest reduction potential, etc). However, the poor stability of Li metal / liquid electrolyte interfaces leads to chronic problems, such as dendrite formation and capacity loss. The possible impact of mechanical effects on interface stability and dendrite formation are difficult to probe directly. In this study, stress evolution during lithium plating and stripping was monitored with precise in situ measurements. The data obtained with different film thicknesses made it possible to separate the stresses associated with the lithium metal and the solid electrolyte interphase (SEI). The resultsmore » show that significant stresses are created in the SEI films. Based on this, a basic model of wrinkling-ratcheting-delamination is also presented. This analysis indicates that plasticity in a growing Li film can enhance surface wrinkling, and thus lead to morphological destabilization of a planar growth front.« less

It is known that the mechanical properties of electrodes in lithium-ion batteries, such as modulus, yield stress, and interfacial strength, can depend strongly on lithium concentration. Furthermore we show that a thin film island electrode with properties dependent on lithium concentration naturally undergoes plastic ratcheting with accumulative deformation and failure during cyclic charging and discharging. Some key predictions from numerical simulations are validated by galvanostatic tests. Strategies to avoid ratcheting include limiting the electrode size and/or selecting a balanced combination of concentration dependent materials properties.