3 Search Results

In additive manufacturing/3D printing, the limitation no longer lies in people’s imagination but in the very materials that one can print with. While the additive manufacturing process can virtually create any geometry, available applications are often limited by factors like parts’ mechanical strength, glass transition temperature, and heat deflection temperature. These factors are especially critical for polymer-based printing. Here we introduce a simple formulation derived from the aminolysis of polylactic acid (PLA) plastic waste, namely the N-lactoyl ethanolamine (N-LEA). The N-LEA is next reacted with excess methacrylic anhydride, forming a photo-crosslinkable resin for MSLA 3D printing. The resulting 3D printedmore » part has a set of impressive properties that is unrivaled amongst engineering grade 3D printing resins on the market and research literature. The 3D printed part has an ultrahigh tensile strength of 131.7 MPa, glass transition at ~190 °C, and heat deflection temperature at 162.6 °C. Furthermore, this work demonstrates a true upcycling approach for turning PLA waste into a value-added product in a simple and efficient manner while also expanding the high-performance material portfolio available for photocuring additive manufacturing.« less

Waste epoxy materials become an enormous problem to society and the environment. The advantages of epoxy resins derive from their rigid and chemically stable networks, but these qualities also make them difficult to dispose of or recycle. In this work, we demonstrated an efficient degradation of anhydride cured epoxy resin by aminolysis in aminoethanol without using any catalysts. The epoxy resin was fully decomposed at 160 °C in 4 h, resulting in two distinct high purity monomers (HHPA-OH and BPA-OH). To fully realize this upcycling approach, The BPA-OH was used to synthesize a polyurethane coating with an excellent glass transitionmore » temperature (88.9 °C), scratch hardness (8H), gouge hardness (6H), adhesive strength (5B), and strong solvent resistance. The HHPA-OH with two hydroxyl groups was reacted with methacrylic anhydride to form a dimethacrylate monomer which was then used as a viable crosslinker for photo-curable 3D printing thermosetting polymer with tensile strength as high as 64 MPa and impact strength of 4.86 kJ/m². This work demonstrates a feasible pathway to convert anhydride cured epoxy waste to new monomeric recyclates for superior polymer products.« less

As the demand for PLA increases, post-consumer disposal strategies must be carefully considered. While we would love to embrace a bioplastic future, we also need to tread carefully. Though PLA is widely claimed to be biodegradable, full degradation often requires conditions not typically found in landfills or industrial composting. Therefore, it will negatively impact the environment if treated carelessly. Here, in this work, we report a simple PLA upcycling path to turn existing PLA wastes into new 3D printable materials within 48 hours. The ester bonds of PLA can be cleaved efficiently via aminolysis. The obtained monomeric compound was derivatizedmore » with methacrylic anhydride, which introduces double bonds and thus a cross-linkable monomer is obtained. In combination with a comonomer and initiator, a photocurable resin is produced. The resin can be fed into any commercially available photocuring 3D printer. The 3D printed parts derived from PLA wastes exhibit impressive performances with a tensile strength of 58.6 MPa, Young's modulus of 2.8 GPa, and glass transition at ~180 °C. Our work demonstrates a new route to active upcycling of PLA while minimizing the need for disposal.« less