15 Search Results

Polyurethane plastics are essential in many consumer and commercial products such as insulation, furniture, automotive interiors, and clothing. Pathways for producing polyurethane from microalgae offer an opportunity to reduce greenhouse gas emissions and other environmental impacts and can incorporate processes that avoid the use of toxic isocyanates typically used in conventional polyurethane production processes. In this study, the greenhouse gas emissions, fossil energy, and water consumption of biobased polyurethane and biobased non-isocyanate polyurethane were evaluated via life-cycle analysis using the R&D Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies model. Microalgae-based polyurethane foam was found to achieve greenhouse gasmore » emission reductions of up to 79% compared with conventional polyurethane foam production. The greenhouse gas reductions for the non-isocyanate microalgae polyurethane pathway are slightly lower at 58% compared with conventional polyurethane foam. However, it offers additional benefits by reducing toxicity potential compared to the isocyanate polyurethane pathway. The analysis also included a biorefinery-level analysis to evaluate the impact of incorporating polyurethane production into fuel-processing microalgae biorefineries. The sensitivity analyses conducted in this study reveal that improved algae cultivation strategies can lead to decreases of up to 127% and 80% in GHG emissions from the baseline process of Bio-PU and Bio-NIPU, respectively. Likewise, implementation of renewable electricity can result in up to 128% and 74% lower GHG emissions compared to the baseline production of Bio-PU and Bio-NIPU, respectively. Finally, the analysis evaluated different coproduct handling methods including displacement and allocation (based on mass, energy, and market-value). The results suggest that it is important to consider both the displacement and allocation methods as these led to significant differences in the environmental impacts.« less

The development of microalgal biorefineries, utilizing high-value coproducts, offers a strategy to lower biofuel production costs, while the use of saline-tolerant microalgal species contributes to reducing freshwater consumption. This study evaluates the life cycle performance of saline microalgae cultivation and conversion at a national scale by analyzing economics, greenhouse gas (GHG) emissions, marginal GHG avoidance cost (MAC), water scarcity footprints, land-use change emissions, and resource availability. The Algal Biomass Assessment Tool (BAT) is applied for site selection, while algae farm and conversion models are used for techno-economic analysis (TEA). The Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (GREET)more » model is employed for life cycle assessment (LCA) by integrating the outputs from BAT and TEA. Our findings demonstrate that electricity and nutrient consumption are the primary drivers of base case GHG emissions, while biomass yield is the key factor determining both GHG emissions and economic performance. Saline microalgal biorefineries can achieve a MAC limit of $$\$$$$80–200/tonne when high-value bio-coproducts, such as whey protein concentrate, are benchmarked, contingent on supply-demand conditions and other market drivers. However, this reduction may not be compatible with current carbon prices. Further increase in biomass yield, reductions in energy and nutrient usage, and the careful selection of high-value protein coproduct targets with high conventional GHG emissions during the design stage are recommended. Additionally, saline microalgal biorefineries show great potential in addressing water stress, as the electricity requirements for desalinating brackish and saline water are relatively low compared to the overall system electricity demand.« less

Many of the challenges faced by the first commercial biorefineries were associated with feedstock handling, quality, and cost. Strategies are needed to enable further expansion of biorefineries and meet the growing demand for bio-based fuels and products. Here, we examine 2 key feedstock challenges and mitigation strategies in the context of a catalytic fast pyrolysis (CFP) biorefinery: (1) the operability of the feed system, which may be improved by modifying the minimum particle size fed to the reactor, and (2) the quality of the biomass, which may be improved by employing air classification to remove undesirable material and increase fuelmore » yields. We conduct techno-economic analysis (TEA) and life-cycle analysis for these strategies, employing a discrete event simulation model for biomass preprocessing combined with a series of correlations developed from literature data and a rigorous CFP conversion model. Our results highlight the importance of balancing increased cost and material losses from preprocessing against improved operability and fuel yields. Economics and sustainability were optimized when operating at the lowest minimum particle size, emphasizing the importance of minimizing material losses while maintaining the operability of the process. Economically, additional costs and material losses from air classification could be acceptable due to improved biomass conversion, and an optimum air classification speed was identified; however, the fuel GHG emissions were minimized when air classification was not used. Valorizing material removed during preprocessing as a coproduct could improve economics and sustainability, decreasing the burden of material losses.« less

Fast pyrolysis of woody materials is a technology pathway for producing renewable fuels and chemicals. This is a presentation of isolating needles, bark, and stemwood from a single tree as well as isolating stemwood and whole tree samples from the same species of tree with different ages and pyrolyzing each individually as well as in mixtures. This gives insight into the role of tree anatomical fractions on the resulting intermediate oil product as well as into interactions between these components. The highest carbon content oil (45.1 wt% as received) was produced from a one-to-one mixture of stemwood and needles, followedmore » by the pure stemwood (43.4–43.8 wt% as received), while the lowest oil carbon content was from a one-to-one blend of bark and needles (26.7 wt% as received). The pyrolysis oil yield (combining oil and aqueous where separation occurred) varied from 54 wt% as received (needles) to 72.3 wt% as received (stemwood). When comparing trees of different ages, we find the change in the ratio of the anatomical fractions is a dominant factor in the product composition and yields, while the product composition and yields vary slightly with tree age when only the stemwood is pyrolyzed. Here, in this study, we present the bench-scale pyrolysis, yields, and product characterization of loblolly pine feedstocks (13- vs. 23 year-old, residues, air-classified residues, whole tree, needles, bark, and stemwood).« less

We develop a continuous catalytic process to convert wet waste-derived volatile fatty acids into sustainable aviation fuel and aromatic chemicals.

Abstract To reach the goals set by the US Department of Energy's Sustainable Aviation Fuel (SAF) Grand Challenge, currently available feedstocks may be insufficient. Giving priority to developing, prototyping and reducing the cost of algal feedstock before investing and lining up locations is important. As the production of algal feedstocks advances, a simplified conversion approach using more mature technologies can help reduce the investment risk for algae‐based fuels. Reducing process complexity to the steps described here [namely, conversion of lipids to HEFA (hydroprocessed esters and fatty acids) fuels and relegating the remainder of the biomass to anaerobic digestion or food/feedmore » production] enables the near‐term production of algal SAF but presents challenging economics depending on achievable cultivation costs and compositional quality. However, these economics can be improved by present‐day policy incentives. With these incentives, the modeled algae‐to‐HEFA pathway could reach a minimum fuel selling price as low as $4.7 per gasoline gallon equivalent depending on the carbon intensity reduction that can be achieved compared with petroleum. Uncertainty about algal feedstock production maturity in the current state of technology and the future will play a large role in determining the economic feasibility of building algae‐to‐HEFA facilities. For example, if immaturity increases the feedstock price by even 10%, SAF production in 2050 is about 58% of the production which could have been achieved with mature feedstock. Additionally, growth in this conversion pathway can be notably boosted through the inclusion of subsidies, and also through higher‐value coproducts or higher lipid yields beyond the scope of the process considered here.« less

Here this work proposes and applies a sequential approach of objective methods to aid the decision-making process for the deployment of microalgae biorefineries. The strategy combines Multicriteria Decision Analysis (MCDA) and weight assignment methods to simultaneously consider technical, economic, and environmental criteria to (1) outrank the best bioproduct options from different biomass fractions present in microalgae biomass at different ratios (namely carbohydrates, lipids, and protein) and (2) define the most suitable biorefining pathways associated with specific pairings of microalgae strains and cultivation conditions. The first part of the assessment identified succinic acid, acrylic acid, and citric acid as the top-rankedmore » bioproducts from carbohydrates, polyurethane from lipids, and thermoplastic extrusion co-feed from protein. The second step of the analysis determined that, when production of a hydrocarbon fuel is desired, the compositional profile of a strain is paramount in defining the biorefining setup that should be pursued. In summary, microalgae lipids should be sent to the production of hydrocarbon fuels if the ratio between neutral lipids and fermentable carbohydrates is higher than roughly 1, with carbohydrates and protein being converted to the higher-value products noted above. Finally, this result was corroborated through process simulations, which indicated superior economic and environmental metrics when strains are paired with suitable conversion pathways identified through MCDA based on their compositional profiles. The outcomes of this work provide clear, objective, guidelines for establishing the best biorefining approach for a large suite of biochemical compositions as a screening method prior to employing detailed process simulations alongside rigorous techno-economic and life-cycle assessments.« less

Biomass conversion to fuels and chemicals is crucial to decarbonization, but choosing an advantageous upgrading pathway out of many options is challenging. Rigorously evaluating all candidate pathways (process simulation, product property testing) requires a prohibitive amount of research effort; even simple upgrading schemes have hundreds of possible permutations. We present a method enabling high-throughput screening by approximating upgrading unit operations and drop-in compatibility of products (e.g., fuel properties) and apply it to volatile fatty acid (VFA) conversion to liquid transportation fuels via a MATLAB script, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE). VULTURE selects upgrading configurations that maximizemore » fuel blend bio-derived content. We validate VULTURE's approximations through surrogate fuel property testing and process simulation. Techno-economic and life cycle analyses suggest that VFA upgrading processes down-selected by VULTURE are profitable and have low carbon intensities, demonstrating the potential for the strategy to accelerate process development timelines at decreased costs.« less