272 Search Results

Dry reforming of methane (DRM) is a process that converts two greenhouse gases (methane and carbon dioxide) into syngas, a mixture of H2 and CO, that can lead to a variety of value-added chemicals. Owing to its endothermic nature, high reaction temperatures up to 800 °C are typically required and the grand challenge lies in developing robust catalysts without sintering and coking-induced deactivation during the long-term on-stream operation. Towards this aim, herein, a robust complex oxide-supported NiCu alloy catalyst was generated in situ during DRM. By leveraging the configurational stability of a solid oxide solution precursor, tightly anchored NiCu bimetallicmore » nanoparticles were in situ exsoluted and acted as the active sites in DRM. The as-afforded catalyst exhibited stable performance for DRM due to the ability to repel coke off the surface as the reaction proceeds. Kinetic experiments along with top surface characterization detail the reconstruction behavior of the solid oxide solution under DRM reaction conditions. The fundamental insights from this work provide guidance on generating resistant and flexible catalysts via in situ active sites formation from easily synthesized metal oxide solid solutions.« less

Lithium replenishment separators (LRSs) integrating pre-lithiation agents can regenerate degraded lithium cathodes via facile reassembly with a fresh anode and the LRS. A persistent challenge is the formation of gas or solid residues during pre-lithiation. To address this, for the first time, we develop an LRS based on a molecularly engineered dilithium salt of tetrafluorohydroquinone, which compensates for lithium loss while generating decomposition products that dissolve in the electrolyte as a favorable additive, without forming gas or solid residues, thus offering a green route for lithium compensation. A pristine LiFePO₄‖graphite full cell with the LRS exhibits 9.3% higher overall capacitymore » than a polypropylene separator (PPS) cell after 50 cycles at 0.5C, and the degraded LiFePO₄‖graphite full cell incorporating this LRS achieves a 44.9% higher capacity than the PPS-based cell after 200 cycles at 0.5C. Our LRS demonstrates strong potential for high-performance lithium-ion batteries and spent battery regeneration.« less

As large language models (LLMs) become central tools in science, improving their reasoning capabilities is critical for meaningful and trustworthy applications. We introduce a Socratic agent for scientific reasoning, implemented through a structured system prompt that guides LLMs via classical principles of inquiry. Unlike typical prompt engineering or retrieval-based methods, our approach leverages definition, analogy, hypothesis elimination, and other Socratic techniques to generate more coherent, critical, and domain-aware responses. We evaluate the agent across diverse scientific domains and benchmark it on the abstraction and reasoning corpus challenge dataset, achieving 97.15% under a fixed prompting protocol and without fine-tuning or externalmore » tools. Expert evaluation shows improved reasoning depth, clarity, and adaptability over conventional LLM outputs, suggesting that structured prompting rooted in philosophical reasoning can improve the scientific utility of language models.« less

Safe and efficient hydrogen storage is pivotal for enabling a clean hydrogen economy. Liquid organic hydrogen carriers (LOHCs) offer a practical solution, but their deployment is hindered by the lack of highly active and economical dehydrogenation catalysts. Here, we report a metal-free catalyst design that overcomes the long-standing trade-off between crystallinity and surface area in two-dimensional frameworks for highly efficient dehydrogenation of LOHCs. A flux-assisted reconstruction strategy transforms amorphous borocarbonitrides (AM-BCN) into highly crystalline, defect-rich BCN nanosheets (C-BCN) with large surface area and accessible porosity, as confirmed by complementary spectroscopic, x-ray, and neutron analyses. C-BCN catalyzes the acceptor-less dehydrogenation ofmore » aza-fused LOHCs with quantitative hydrogen release under mild conditions, outperforming AM-BCN and previously reported metal-free scaffolds. Mechanistic insights from x-ray, neutron scattering, and theoretical calculations identify open C-B-N and N-B-N defect motifs as the primary active sites. This work establishes a generalizable strategy to engineer crystalline, porous, defect-rich two-dimensional lattices and demonstrates a highly active metal-free platform for LOHC dehydrogenation with high-purity H2 generation.« less

Understanding the distinct roles of lithium ions (Li+) and lithium polysulfide intermediates, Li2Sx (LiPS) is critical for designing electrolytes that can extend the practical cycle life of lithium–sulfur (Li–S) batteries. In this work, we decouple the solvation and solubility effects of Li+ and LiPS and correlate them with electrochemical performance through a cosolvent strategy. Li+ solubility and solvation primarily dictate the electrolyte’s ionic conductivity and the reversibility of lithium anode stripping/plating. In contrast, LiPS solvation governs the thermodynamics of sulfur (S8), LiPS, and lithium sulfide (Li2S) interconversion, while the LiPS solubility determines their redox kinetics. By employing a fluorinated–glyme (F-glyme)more » cosolvent, specifically 1,2-bis(2,2-difluoroethoxy)ethane (F4DEE), that exhibits low LiPS solubility yet moderate Li+ solvation, we designed an electrolyte that enhances lithium anode stability while maintaining sufficient sulfur cathode kinetics, thereby prolonging Li–S cell cycle life. This study provides mechanistic insights into the interplay between Li+ and LiPS in Li–S electrochemistry and offers design principles for next-generation electrolytes for Li–S batteries.« less

The metal–support interface is central to governing catalytic transformations. While strong metal–support interaction (SMSI) is an established strategy to tailor the morphology and electronic properties of supported metal catalysts, the role of interfacial charge redistribution in SMSI formation remains poorly understood and rarely leveraged. Here, in this study, we report a dual-stimuli approach that combines pH modulation with ultrasonication to mediate SMSI construction in aqueous solution through dynamic Fermi level tuning. By leveraging in situ pH-driven charge redistribution at the metal–support interface, we achieve controllable SMSI encapsulation of metal nanoparticles, as verified by electrochemical analysis, work function measurements, and x-ray-basedmore » techniques. The resulting catalysts exhibit tunable SMSI features and deliver enhanced activity and selectivity in hydrogenation reactions. This work establishes a facile strategy to modulate catalyst structure and electronic properties by exploiting Fermi level variation as a driving force, thereby advancing rational SMSI design and catalytic performance across diverse environments.« less

Traditional ethylene carbonate (EC)-based electrolytes exhibit strong solvation power at the surface of the layered transition metal oxide cathodes, which accelerates transition metal dissolution. The subsequent migration and deposition of dissolved transition metal species on the anode surface lead to significant capacity fading. To overcome this challenge, we report a weakly solvating, all-fluorinated electrolyte designed to mitigate transition metal dissolution. For the first time, the role of electrolyte solvation in suppressing transition metal dissolution is systematically investigated. The tailored electrolyte significantly reduces transition metal dissolution and enhances the electrochemical performance of Li- and Mn-rich (LMR) cathode/graphite cells. This solvation-modulating strategymore » offers a broadly applicable framework for stabilizing interphases in other earth-abundant cathode chemistries, which similarly demand kinetic protection against interfacial degradation.« less

Upcycling is recognized as a sustainable recycling approach for spent lithium-ion batteries. However, existing upcycling methods typically involve intricate pretreatment or post-treatment steps, complicating their practical application. Here, in this study, we propose a straightforward, etching-assisted upcycling method that effectively transforms polycrystalline Ni-lean cathodes into high-performance single crystal Ni-rich cathodes. During the etching step, nickel acetate was dissolved into acetic acid and then polycrystalline NMC111 are etched in the solution. Finally, polycrystalline NMC111 are converted into single crystal particles coated with amorphous nickel acetate. This significantly enhances elemental diffusion during subsequent sintering by minimizing both particle size and the contactmore » distance between NMC111 and nickel acetate. As elemental diffusion is improved and acetate ions decompose completely during sintering, the process requires neither additional pretreatment nor post-treatment. The resulting cathode materials (Etched-UP622) exhibit superior structural and electrochemical properties compared to the Control622, achieving an energy density of 719.7 Wh/kg, approximately 56.7 mAh/g higher than Control622 and 125.5 Wh/kg higher than NMC111. Etched-UP622 also delivers higher discharge capacity, improved rate performance and cycling stability, surpassing Control622 and NMC111. Meanwhile, NMC811 also can be synthesized by the proposed strategy, and the discharge capacity can reach 166.9 mAh/g at 1C, similar to 14 mAh/g higher than Control811. Overall, this etching-assisted strategy simplifies the upcycling process and offers a scalable, sustainable route for producing high-quality cathode materials.« less

Silicon (Si) is a promising high-capacity anode in lithium-ion batteries but suffers from chronic chemical degradation and capacity fading during calendar aging, greatly hindering its automobile applications. Electrolyte engineering currently relies on conventional evaluation criteria of reducing coulombic consumption, which implicitly presume its equivalence to irreversible capacity loss and complicates battery development. Here, we introduce the detrimental ratio p to quantify the fraction of parasitic species that permanently degrades active material. This metric is independent and crucially complements total coulombic consumption for accurate performance evaluation. We systematically investigate multiple electrolyte formulations using high-precision leakage current measurements, open-circuit-voltage experiments, and post-mortemmore » characterizations. Although some electrolytes exhibit similarly low coulombic consumption, they diverge significantly incapacity retention and p. Especially, dimethyl-carbonate-based localized-high concentration electrolyte can synergically achieve low coulombic consumption and detrimental ratio p during calendar aging, owing to its chemically inert and structurally resilient solidelectrolyte interface with minimal isolated Si material. By contrast, increasing fluoroethylene carbonate (FEC) additive content suppresses electrolyte breakdown but suffers aggravated chemical degradation of more LixSi isolation for irreversible capacity loss with arising p. This study critically reveals that the chemistry-characteristic detrimental ratio p establishes physically informed performance evaluation to pave the way for accelerating battery development.« less

Ionic liquids (ILs) have emerged as highly tunable sorbents and membranes for gas separation, especially in the purification of CO₂-containing gas streams such as air, natural gas, biogas, and syngas. Their negligible volatility, high thermal stability, and chemical versatility position them as promising alternatives to conventional amine and alkaline metal derivative-based systems, effectively addressing key challenges such as volatility, stability, and high regeneration energy. Here, this Review explores IL-derived systems for CO₂-related gas separation across dense, porous, and supported categories. At the dense liquid level, we discuss strategies for tailoring IL properties to optimize CO₂ sorption, focusing on the correlationmore » between IL-CO₂ interaction strength, uptake capacity, and regeneration energy. Key advancements in carbon capture, including amino-functionalized (AILs) and superbase-derived ILs (SILs), are highlighted, along with strategies such as chemical structure engineering, multiple binding site integration, alternative driving force exploration, and stability enhancement. Then, the porous liquids (PLs) scale focuses on the emerging field integrating IL properties with permanent porosity engineering, spanning ultramicropores (<5 Å) to macropores (around 100 nm). These innovations improve gas uptake capacity, accelerate transport kinetics, introduce the gating effect, and enable the coexistence of active sites with antagonistic properties within a single IL medium. At the supported IL scale, the discussion shifts to IL- and ionic pair-modified sorbents and membranes, emphasizing the modulation of cations and anions, confinement effects from porous supports, and the IL–interface interaction to enhance CO₂ separation performance, particularly in diluted gas streams. Beyond separation, this Review highlights IL-based integrated processes for CO₂ capture and conversion into value-added chemicals via thermocatalytic, electrocatalytic, and photocatalytic pathways. At each scale, advanced computational and experimental tools for IL design are also discussed, providing insights into stability enhancement, sorption efficiency, and process integration. The Review concludes by addressing existing challenges and outlining future directions for IL-driven innovations in gas separation technologies.« less