Totally chlorine-free peracetic acid pulping for nanocellulose isolation from hemp and poplar

Journal Article · Fri Sep 01 00:00:00 UTC 2023 · TAPPI Journal

DOI: https://doi.org/10.32964/tj22.8.529 · OSTI ID:2267629

Kheam, Rithany ^[1]; Zhang, Kailong ^[1]; Elder, Thomas ^[2]; Bryant, Nathan ^[1]; Raguaskas, Arthur ^[3]; Li, Mi ^[1]

---

1. University of Tennessee, Knoxville, TN (United States)
2. USDA Forest Service, Auburn, AL (United States). Southern Research Station (SRS)
3. University of Tennessee, Knoxville, TN (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Nanocellulose is a promising and sustainable feedstock for developing advanced and functional materials. However, the characteristics of nanocellulose, such as crystallinity, surface energy, and aspect ratio, can vary depending on biomass source and pretreatment methods, leading to variable performance of the nanocellu-lose-based materials. In this study, cellulose nanocrystals (CNCs) were isolated from hemp and poplar using totally chlorine free (TCF) peracetic acid and sodium chlorite delignification and bleaching pretreatments to probe the influences of biomass source and treatment methods on the isolation and characteristics of CNCs. Our results showed that hemp and poplar were almost completely delignified by peracetic acid treatment, whereas sodium chlorite treatment left 5%–6% lignin in the pulp. The yields of CNCs from raw hemp and poplar biomass ranged from 9.8% to 21.9% and 10.9% to 28.3%, respectively, depending on the treatment methods. The dimensions of CNCs from TCF-treated biomass generally maintained a larger width and aspect ratio than those from sodium chlorite-treated biomass. The poplar-derived CNCs exhibited slightly higher crystallinity of 53%–58% than hemp-derived CNCs of 49%–54%. The zeta potential of the CNCs, ranging from -20.1 mV to -31.1 mV, ensured a well-dispersed aqueous solution. The surface energy (dispersive energy of 40–80 mJ/m2 and specific energy of 2–10 mJ/m2), water interaction, and thermal stability of the CNCs were comparable, regardless of the biomass source and pretreatment methods. Our finding suggests that the TCF technique with peracetic acid treatment is a promising delignification and bleaching approach to obtain cellulose-rich pulps from herbaceous and hardwood biomass for nanocellulose isolation.

• Research Organization: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
• Sponsoring Organization: USDOE
• Grant/Contract Number: AC05-00OR22725
• OSTI ID: 2267629
• Journal Information: TAPPI Journal, Journal Name: TAPPI Journal Journal Issue: 8 Vol. 22; ISSN 0734-1415
• Publisher: Technical Association of the Pulp and Paper IndustryCopyright Statement
• Country of Publication: United States
• Language: English