A review of materials used in tomographic volumetric additive manufacturing

Madrid-Wolff, Jorge; Toombs, Joseph; Rizzo, Riccardo; Bernal, Paulina Nuñez; Porcincula, Dominique; Walton, Rebecca; Wang, Bin; Kotz-Helmer, Frederik; Yang, Yi; Kaplan, David; Zhang, Yu Shrike; Zenobi-Wong, Marcy; McLeod, Robert R.; Rapp, Bastian; Schwartz, Johanna; Shusteff, Maxim; Talyor, Hayden; Levato, Riccardo; Moser, Christophe

doi:10.1557/s43579-023-00447-x

Title: A review of materials used in tomographic volumetric additive manufacturing

Journal Article · 29 August 2023 · MRS communications

DOI: https://doi.org/10.1557/s43579-023-00447-x · OSTI ID:1997284

Madrid-Wolff, Jorge; Toombs, Joseph; Rizzo, Riccardo; Bernal, Paulina Nuñez; Porcincula, Dominique; Walton, Rebecca; Wang, Bin; Kotz-Helmer, Frederik; Yang, Yi; Kaplan, David; Zhang, Yu Shrike; Zenobi-Wong, Marcy; McLeod, Robert R.; Rapp, Bastian; Schwartz, Johanna; Shusteff, Maxim; Talyor, Hayden; Levato, Riccardo; Moser, Christophe

Abstract Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light patterns build up a three-dimensional energy dose within the photosensitive resin, solidifying the volume of the desired object within seconds. Departing from established sequential fabrication methods like stereolithography or digital light printing, volumetric additive manufacturing offers new opportunities for the materials that can be used for printing. These include viscous acrylates and elastomers, epoxies (and orthogonal epoxy-acrylate formulations with spatially controlled stiffness) formulations, tunable stiffness thiol-enes and shape memory foams, polymer derived ceramics, silica-nanocomposite based glass, and gelatin-based hydrogels for cell-laden biofabrication. Here we review these materials, highlight the challenges to adapt them to volumetric additive manufacturing, and discuss the perspectives they present. Graphical abstract

View Journal Article

Cite

Export

Save

Research Organization:: Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC52-07NA27344

OSTI ID:: 1997284

Alternate ID(s):: OSTI ID: 2469755

Journal Information:: MRS communications, Journal Name: MRS communications Vol. 13 Journal Issue: 5; ISSN 2159-6867

Publisher:: Cambridge University Press (CUP)Copyright Statement

Country of Publication:: United States

Language:: English

References (84)

Click Chemistry: Diverse Chemical Function from a Few Good Reactions Kolb, Hartmuth C.; Finn, M. G.; Sharpless, K. Barry Angewandte Chemie International Edition, Vol. 40, Issue 11, p. 2004-2021 https://doi.org/10.1002/1521-3773(20010601)40:11<2004::AID-ANIE2004>3.0.CO;2-5	journal	June 2001
High-resolution 3D photopolymerization assisted by upconversion nanoparticles for rapid prototyping applications Rocheva, Vasilina V.; Koroleva, Anastasia V.; Savelyev, Alexander G. Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-21793-0	journal	February 2018
3D printing of glass by additive manufacturing techniques: a review Zhang, Dao; Liu, Xiaofeng; Qiu, Jianrong Frontiers of Optoelectronics, Vol. 14, Issue 3 https://doi.org/10.1007/s12200-020-1009-z	journal	July 2020
Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymer Liew, Li-Anne; Liu, Yiping; Luo, Ruiling Sensors and Actuators A: Physical, Vol. 95, Issue 2-3, p. 120-134 https://doi.org/10.1016/S0924-4247(01)00723-3	journal	January 2002
Two-step curing processes for coating application de Ruiter, Barteld; El-ghayoury, Abdelkrim; Hofmeier, Harald Progress in Organic Coatings, Vol. 55, Issue 2 https://doi.org/10.1016/j.porgcoat.2005.09.011	journal	February 2006
One-step volumetric additive manufacturing of complex polymer structures Shusteff, Maxim; Browar, Allison E. M.; Kelly, Brett E. Science Advances, Vol. 3, Issue 12 https://doi.org/10.1126/sciadv.aao5496	journal	December 2017
Volumetric helical additive manufacturing Boniface, Antoine; Maître, Florian; Madrid-Wolff, Jorge Light: Advanced Manufacturing, Vol. 4, Issue 2 https://doi.org/10.37188/lam.2023.012	journal	January 2023
Photopolymerization in 3D Printing Bagheri, Ali; Jin, Jianyong ACS Applied Polymer Materials, Vol. 1, Issue 4 https://doi.org/10.1021/acsapm.8b00165	journal	February 2019
Synthesis of Polycarbosilane/Siloxane Hybrid Polymers and Their Pyrolytic Conversion to Silicon Oxycarbide Ceramics Liu, Q.; Shi, W.; Babonneau, F. Chemistry of Materials, Vol. 9, Issue 11 https://doi.org/10.1021/cm970316e	journal	November 1997
Volumetric Photopolymerization Confinement through Dual-Wavelength Photoinitiation and Photoinhibition van der Laan, Harry L.; Burns, Mark A.; Scott, Timothy F. ACS Macro Letters, Vol. 8, Issue 8 https://doi.org/10.1021/acsmacrolett.9b00412	journal	July 2019
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface Walker, David A.; Hedrick, James L.; Mirkin, Chad A. Science, Vol. 366, Issue 6463 https://doi.org/10.1126/science.aax1562	journal	October 2019
Highly Tunable Thiol‐Ene Photoresins for Volumetric Additive Manufacturing Cook, Caitlyn C.; Fong, Erika J.; Schwartz, Johanna J. Advanced Materials, Vol. 32, Issue 47 https://doi.org/10.1002/adma.202003376	journal	October 2020
Stereolithography of SiOC Ceramic Microcomponents Zanchetta, Erika; Cattaldo, Marco; Franchin, Giorgia Advanced Materials, Vol. 28, Issue 2 https://doi.org/10.1002/adma.201503470	journal	November 2015
Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units Neumann, Miguel G.; Miranda, Walter G.; Schmitt, Carla C. Journal of Dentistry, Vol. 33, Issue 6 https://doi.org/10.1016/j.jdent.2004.11.013	journal	July 2005
Volumetric additive manufacturing of shape memory polymers Schwartz, Johanna J.; Porcincula, Dominique H.; Cook, Caitlyn C. Polymer Chemistry, Vol. 13, Issue 13 https://doi.org/10.1039/D1PY01723C	journal	January 2022
High Resolution Dual Material Stereolithography for Monolithic Microdevices Schmidleithner, Christina; Zhang, Rujing; Taebnia, Nayere Advanced Materials Technologies, Vol. 7, Issue 6 https://doi.org/10.1002/admt.202101180	journal	November 2021
Light-Induced Click Reactions Tasdelen, Mehmet Atilla; Yagci, Yusuf Angewandte Chemie International Edition, Vol. 52, Issue 23 https://doi.org/10.1002/anie.201208741	journal	May 2013
Volumetric additive manufacturing of silica glass with microscale computed axial lithography Toombs, Joseph T.; Luitz, Manuel; Cook, Caitlyn C. Science, Vol. 376, Issue 6590 https://doi.org/10.1126/science.abm6459	journal	April 2022
X-ray computed tomography Withers, Philip J.; Bouman, Charles; Carmignato, Simone Nature Reviews Methods Primers, Vol. 1, Issue 1 https://doi.org/10.1038/s43586-021-00015-4	journal	February 2021
Use of volumetric additive manufacturing as an in-space manufacturing technology Waddell, Taylor; Toombs, Joseph; Reilly, Ashley Acta Astronautica, Vol. 211 https://doi.org/10.1016/j.actaastro.2023.06.048	journal	October 2023
Extremely stretchable and self-healing conductor based on thermoplastic elastomer for all-three-dimensional printed triboelectric nanogenerator Parida, Kaushik; Thangavel, Gurunathan; Cai, Guofa Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-10061-y	journal	May 2019
Refractive Index and Abbe Number Tuning via 3D Printable Optical Quality Silica–Titania–Germania Glasses Ha, Jungmin; Sasan, Koroush; Yee, Timothy D. Advanced Photonics Research, Vol. 3, Issue 10 https://doi.org/10.1002/adpr.202200017	journal	May 2022
Xolography for linear volumetric 3D printing Regehly, Martin; Garmshausen, Yves; Reuter, Marcus Nature, Vol. 588, Issue 7839 https://doi.org/10.1038/s41586-020-3029-7	journal	December 2020
3D-printed programmable tensegrity for soft robotics Lee, Hajun; Jang, Yeonwoo; Choe, Jun Kyu Science Robotics, Vol. 5, Issue 45 https://doi.org/10.1126/scirobotics.aay9024	journal	August 2020
Additive Manufacturing of Transparent Soda-Lime Glass Using a Filament-Fed Process Luo, Junjie; Gilbert, Luke J.; Qu, Chuang Journal of Manufacturing Science and Engineering, Vol. 139, Issue 6 https://doi.org/10.1115/1.4035182	journal	January 2017
Two-step absorption instead of two-photon absorption in 3D nanoprinting Hahn, Vincent; Messer, Tobias; Bojanowski, N. Maximilian Nature Photonics, Vol. 15, Issue 12 https://doi.org/10.1038/s41566-021-00906-8	journal	November 2021
From 3D to 2D and back again Dinc, Niyazi Ulas; Saba, Amirhossein; Madrid-Wolff, Jorge Nanophotonics, Vol. 12, Issue 5 https://doi.org/10.1515/nanoph-2022-0512	journal	January 2023
Multimaterial actinic spatial control 3D and 4D printing Schwartz, J. J.; Boydston, A. J. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-08639-7	journal	February 2019
Triplet fusion upconversion nanocapsules for volumetric 3D printing Sanders, Samuel N.; Schloemer, Tracy H.; Gangishetty, Mahesh K. Nature, Vol. 604, Issue 7906 https://doi.org/10.1038/s41586-022-04485-8	journal	April 2022
Porous polymer derived ceramics Vakifahmetoglu, Cekdar; Zeydanli, Damla; Colombo, Paolo Materials Science and Engineering: R: Reports, Vol. 106 https://doi.org/10.1016/j.mser.2016.05.001	journal	August 2016
Simultaneous fabrication of multiple tablets within seconds using tomographic volumetric 3D printing Rodríguez-Pombo, Lucía; Martínez-Castro, Laura; Xu, Xiaoyan International Journal of Pharmaceutics: X, Vol. 5 https://doi.org/10.1016/j.ijpx.2023.100166	journal	December 2023
A Versatile Synthetic Extracellular Matrix Mimic via Thiol-Norbornene Photopolymerization Fairbanks, Benjamin D.; Schwartz, Michael P.; Halevi, Alexandra E. Advanced Materials, Vol. 21, Issue 48 https://doi.org/10.1002/adma.200901808	journal	October 2009
Correcting ray distortion in tomographic additive manufacturing Orth, Antony; Sampson, Kathleen L.; Ting, Kayley Optics Express, Vol. 29, Issue 7 https://doi.org/10.1364/OE.419795	journal	January 2021
Statistical iterative pattern generation in volumetric additive manufacturing based on ML-EM Chen, Tianhang; Li, Haifeng; Liu, Xu Optics Communications, Vol. 537 https://doi.org/10.1016/j.optcom.2023.129448	journal	June 2023
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning de Beer, Martin P.; van der Laan, Harry L.; Cole, Megan A. Science Advances, Vol. 5, Issue 1 https://doi.org/10.1126/sciadv.aau8723	journal	January 2019
Numerical modeling of part sedimentation during volumetric additive manufacturing Salajeghe, Roozbeh; Meile, Daniel Helmuth; Kruse, Carl Sander Additive Manufacturing, Vol. 66 https://doi.org/10.1016/j.addma.2023.103459	journal	March 2023
Additive Manufacturing of Transparent Silica Glass from Solutions Cooperstein, Ido; Shukrun, Efrat; Press, Ofir ACS Applied Materials & Interfaces, Vol. 10, Issue 22 https://doi.org/10.1021/acsami.8b03766	journal	May 2018
Rheology of Silica Dispersions in Organic Liquids: New Evidence for Solvation Forces Dictated by Hydrogen Bonding Raghavan, Srinivasa R.; Walls, H. J.; Khan, Saad A. Langmuir, Vol. 16, Issue 21 https://doi.org/10.1021/la991548q	journal	October 2000
Wavefront shaping: A versatile tool to conquer multiple scattering in multidisciplinary fields Yu, Zhipeng; Li, Huanhao; Zhong, Tianting The Innovation, Vol. 3, Issue 5 https://doi.org/10.1016/j.xinn.2022.100292	journal	September 2022
Development of a low‐cost volumetric additive manufacturing printer using less viscous commercial resins Pazhamannil, Ribin Varghese; Hadidi, Haitham M.; Puthumana, Govindan Polymer Engineering & Science, Vol. 63, Issue 1 https://doi.org/10.1002/pen.26186	journal	November 2022
Fast photopolymerization of acrylate coatings: Achievements and problems Khudyakov, Igor V. Progress in Organic Coatings, Vol. 121 https://doi.org/10.1016/j.porgcoat.2018.04.030	journal	August 2018
Three-dimensional printing of transparent fused silica glass Kotz, Frederik; Arnold, Karl; Bauer, Werner Nature, Vol. 544, Issue 7650 https://doi.org/10.1038/nature22061	journal	April 2017
High-resolution tomographic volumetric additive manufacturing Loterie, Damien; Delrot, Paul; Moser, Christophe Nature Communications, Vol. 11, Issue 1 https://doi.org/10.1038/s41467-020-14630-4	journal	February 2020
Self-focusing and self-trapping of optical beams upon photopolymerization Kewitsch, Anthony S.; Yariv, Amnon Optics Letters, Vol. 21, Issue 1 https://doi.org/10.1364/OL.21.000024	journal	January 1996
Sol-Gel Formation of Bulk Glasses Sakka, Sumio Handbook of Sol-Gel Science and Technology https://doi.org/10.1007/978-3-319-32101-1_6	book	January 2018
Versatile volumetric additive manufacturing with 3D ray tracing Webber, Daniel; Zhang, Yujie; Picard, Michel Optics Express, Vol. 31, Issue 4 https://doi.org/10.1364/OE.481318	journal	January 2023
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization Ligon, Samuel Clark; Husár, Branislav; Wutzel, Harald Chemical Reviews, Vol. 114, Issue 1 https://doi.org/10.1021/cr3005197	journal	September 2013
Lasers and materials in selective laser sintering Kruth, J. P.; Wang, X.; Laoui, T. Assembly Automation, Vol. 23, Issue 4 https://doi.org/10.1108/01445150310698652	journal	December 2003
Two‐Photon Polymerization of Nanocomposites for the Fabrication of Transparent Fused Silica Glass Microstructures Kotz, Frederik; Quick, Alexander S.; Risch, Patrick Advanced Materials, Vol. 33, Issue 9 https://doi.org/10.1002/adma.202006341	journal	January 2021
Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics Kollep, Max; Konstantinou, Georgia; Madrid-Wolff, Jorge Advanced Engineering Materials, Vol. 24, Issue 7 https://doi.org/10.1002/adem.202101345	journal	January 2022
Controlling Light in Scattering Materials for Volumetric Additive Manufacturing Madrid‐Wolff, Jorge; Boniface, Antoine; Loterie, Damien Advanced Science, Vol. 9, Issue 22 https://doi.org/10.1002/advs.202105144	journal	May 2022
High-speed acoustic holography with arbitrary scattering objects Hirayama, Ryuji; Christopoulos, Giorgos; Martinez Plasencia, Diego Science Advances, Vol. 8, Issue 24 https://doi.org/10.1126/sciadv.abn7614	journal	June 2022
Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability Yue, Liang; Macrae Montgomery, S.; Sun, Xiaohao Nature Communications, Vol. 14, Issue 1 https://doi.org/10.1038/s41467-023-36909-y	journal	March 2023
Kinetic Study and New Applications of UV Radiation Curing Decker, Christian Macromolecular Rapid Communications, Vol. 23, Issue 18 https://doi.org/10.1002/marc.200290014	journal	December 2002
Precursors for sol-gel preparations Guglielmi, M.; Carturan, G. Journal of Non-Crystalline Solids, Vol. 100, Issue 1-3 https://doi.org/10.1016/0022-3093(88)90004-X	journal	March 1988
Volumetric Bioprinting of Organoids and Optically Tuned Hydrogels to Build Liver‐Like Metabolic Biofactories Bernal, Paulina Nuñez; Bouwmeester, Manon; Madrid‐Wolff, Jorge Advanced Materials, Vol. 34, Issue 15 https://doi.org/10.1002/adma.202110054	journal	March 2022
Multimaterial hydrogel with widely tunable elasticity by selective photopolymerization of PEG diacrylate and epoxy monomers Larsen, Esben Kjaer Unmack; Larsen, Niels B.; Almdal, Kristoffer Journal of Polymer Science Part B: Polymer Physics, Vol. 54, Issue 13 https://doi.org/10.1002/polb.24007	journal	February 2016
Challenges and Opportunities in 3D Laser Printing Based on (1 + 1)-Photon Absorption Hahn, Vincent; Bojanowski, N. Maximilian; Rietz, Pascal ACS Photonics, Vol. 10, Issue 1 https://doi.org/10.1021/acsphotonics.2c01632	journal	December 2022
Volumetric Printing Across Melt Electrowritten Scaffolds Fabricates Multi‐Material Living Constructs with Tunable Architecture and Mechanics Größbacher, Gabriel; Bartolf‐Kopp, Michael; Gergely, Csaba Advanced Materials, Vol. 35, Issue 32 https://doi.org/10.1002/adma.202300756	journal	June 2023
Ethyl Cellulose‐Based Thermoreversible Organogel Photoresist for Sedimentation‐Free Volumetric Additive Manufacturing Toombs, Joseph T.; Shan, Ingrid K.; Taylor, Hayden K. Macromolecular Rapid Communications, Vol. 44, Issue 7 https://doi.org/10.1002/marc.202200872	journal	February 2023
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds Bernal, Paulina Nuñez; Delrot, Paul; Loterie, Damien Advanced Materials, Vol. 31, Issue 42 https://doi.org/10.1002/adma.201904209	journal	August 2019
3D printed gradient index glass optics Dylla-Spears, Rebecca; Yee, Timothy D.; Sasan, Koroush Science Advances, Vol. 6, Issue 47 https://doi.org/10.1126/sciadv.abc7429	journal	November 2020
Additive Manufacturing of Optical Quality Germania–Silica Glasses Sasan, Koroush; Lange, Andrew; Yee, Timothy D. ACS Applied Materials & Interfaces, Vol. 12, Issue 5 https://doi.org/10.1021/acsami.9b21136	journal	January 2020
3D-Printed Transparent Glass Nguyen, Du T.; Meyers, Cameron; Yee, Timothy D. Advanced Materials, Vol. 29, Issue 26 https://doi.org/10.1002/adma.201701181	journal	April 2017
Two-photon polymerisation for three-dimensional micro-fabrication Wu, Shuhui; Serbin, Jesper; Gu, Min Journal of Photochemistry and Photobiology A: Chemistry, Vol. 181, Issue 1 https://doi.org/10.1016/j.jphotochem.2006.03.004	journal	July 2006
3D Printed Optical Quality Silica and Silica-Titania Glasses from Sol-Gel Feedstocks Destino, Joel F.; Dudukovic, Nikola A.; Johnson, Michael A. Advanced Materials Technologies, Vol. 3, Issue 6 https://doi.org/10.1002/admt.201700323	journal	January 2018
Tomographic color Schlieren refractive index mapping for computed axial lithography Chung Li, Chi; Toombs, Joseph; Taylor, Hayden Symposium on Computational Fabrication https://doi.org/10.1145/3424630.3425421	conference	November 2020
A Model for the Nanodomains in Polymer-Derived SiCO Saha, Atanu; Raj, Rishi; Williamson, Don L. Journal of the American Ceramic Society, Vol. 0, Issue 0 https://doi.org/10.1111/j.1551-2916.2006.00920.x	journal	April 2006
Three-dimensional microfabrication with two-photon-absorbed photopolymerization Maruo, Shoji; Nakamura, Osamu; Kawata, Satoshi Optics Letters, Vol. 22, Issue 2 https://doi.org/10.1364/OL.22.000132	journal	January 1997
Volumetric additive manufacturing via tomographic reconstruction Kelly, Brett E.; Bhattacharya, Indrasen; Heidari, Hossein Science, Vol. 363, Issue 6431 https://doi.org/10.1126/science.aau7114	journal	January 2019
Direct Laser Sintering of Borosilicate Glass Klocke, F.; McClung, A.; Ader, C. The University of Texas at Austin https://doi.org/10.26153/TSW/6986	null	January 2004
Photoclick Chemistry: A Bright Idea Fairbanks, Benjamin D.; Macdougall, Laura J.; Mavila, Sudheendran Chemical Reviews, Vol. 121, Issue 12 https://doi.org/10.1021/acs.chemrev.0c01212	journal	April 2021
Geometric characterization of additively manufactured polymer derived ceramics Hundley, Jacob M.; Eckel, Zak C.; Schueller, Emily Additive Manufacturing, Vol. 18 https://doi.org/10.1016/j.addma.2017.08.009	journal	December 2017
Volumetric additive manufacturing of pristine silk-based (bio)inks Xie, Maobin; Lian, Liming; Mu, Xuan Nature Communications, Vol. 14, Issue 1 https://doi.org/10.1038/s41467-023-35807-7	journal	January 2023
Latent image volumetric additive manufacturing Rackson, Charles M.; Toombs, Joseph T.; De Beer, Martin P. Optics Letters, Vol. 47, Issue 5 https://doi.org/10.1364/OL.449220	journal	February 2022
Continuous liquid interface production of 3D objects Tumbleston, J. R.; Shirvanyants, D.; Ermoshkin, N. Science, Vol. 347, Issue 6228 https://doi.org/10.1126/science.aaa2397	journal	March 2015
A Synthetic Dynamic Polyvinyl Alcohol Photoresin for Fast Volumetric Bioprinting of Functional Ultrasoft Hydrogel Constructs Qiu, Wanwan; Gehlen, Jenny; Bernero, Margherita Advanced Functional Materials, Vol. 33, Issue 20 https://doi.org/10.1002/adfm.202214393	journal	February 2023
Image reconstruction: Part 1 – understanding filtered back projection, noise and image acquisition Schofield, R.; King, L.; Tayal, U. Journal of Cardiovascular Computed Tomography, Vol. 14, Issue 3 https://doi.org/10.1016/j.jcct.2019.04.008	journal	May 2020
3D Nanofabrication of SiOC Ceramic Structures Brigo, Laura; Schmidt, Johanna Eva Maria; Gandin, Alessandro Advanced Science, Vol. 5, Issue 12 https://doi.org/10.1002/advs.201800937	journal	October 2018
Three-dimensional printing of multicomponent glasses using phase-separating resins Moore, David G.; Barbera, Lorenzo; Masania, Kunal Nature Materials, Vol. 19, Issue 2 https://doi.org/10.1038/s41563-019-0525-y	journal	November 2019
Optimized Photoclick (Bio)Resins for Fast Volumetric Bioprinting Rizzo, Riccardo; Ruetsche, Dominic; Liu, Hao Advanced Materials, Vol. 33, Issue 49 https://doi.org/10.1002/adma.202102900	journal	October 2021
Principles of Computerized Tomographic Imaging Kak, Avinash C.; Slaney, Malcolm Classics in Applied Mathematics https://doi.org/10.1137/1.9780898719277	book	January 2001
Additive Manufacturing of Optically Transparent Glass Klein, John; Stern, Michael; Franchin, Giorgia 3D Printing and Additive Manufacturing, Vol. 2, Issue 3 https://doi.org/10.1089/3dp.2015.0021	journal	September 2015
Volumetric Printing of Thiol‐Ene Photo‐Cross‐Linkable Poly(ε‐caprolactone): A Tunable Material Platform Serving Biomedical Applications Thijssen, Quinten; Quaak, Astrid; Toombs, Joseph Advanced Materials, Vol. 35, Issue 19 https://doi.org/10.1002/adma.202210136	journal	March 2023

Similar Records

Volumetric additive manufacturing via tomographic reconstruction

Journal Article · 2019 · Science · OSTI ID:1547793

Kelly, Brett E.; Bhattacharya, Indrasen; Heidari, Hossein; +3 more

Additive manufacturing: Frameworks for chemical understanding and advancement in vat photopolymerization

Journal Article · 2022 · MRS Bulletin · OSTI ID:1875940

Schwartz, Johanna J.

Development of transparent, particle‐loaded photoresins for volumetric additive manufacturing of silica glass

Journal Article · 2024 · Journal of Polymer Science · OSTI ID:2281074

Myers, Luke A.; Schwartz, Johanna J.; De Beer, Martin P.; +2 more

Related Subjects

Materials Science

Title: A review of materials used in tomographic volumetric additive manufacturing

Citation Formats

References (84)

Similar Records

Related Subjects