AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction
Abstract
A machine component fabricated by additive manufacturing (AM) of metal powders often possesses steep residual stress gradients with significant magnitudes due to large temperature gradients that transpire within a localized area during fabrication. These processing-induced residual stresses can cause distortion of the part, and if they are of significant magnitude, they could induce cracking of the component, degrade printability, and/or diminish subsequent mechanical performance. The ability to predict these residual stresses imparted by AM is an important step in permeating AM technology for advanced manufacturing. Calibration and validation of AM process models used for prediction are, therefore, a critical step in understanding the origin and mitigating the challenges associated with residual stresses inherent to the AM process. In the present work, the residual strain distributions in components with simple geometries fabricated by a laser powder bed fusion (LBPF) process were characterized non-destructively using energy-dispersive X-ray diffraction in support of the US Air Force Research Laboratory Additive Manufacturing Modeling Challenge Series Groeber et al. (JOM 70:441-448, 2018). The measurement setup and approach are described in detail so that the data can be used as a benchmark to calibrate and validate models for the prediction of macro-scale residual stresses due to themore »
- Authors:
-
- Argonne National Laboratory (ANL), Argonne, IL (United States)
- Air Force Research Laboratory (AFRL), Wright-Patterson AFB, OH (United States)
- The Ohio State University, Columbus, OH (United States)
- Publication Date:
- Research Org.:
- Argonne National Laboratory (ANL), Argonne, IL (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities (SUF); US Air Force Office of Scientific Research (AFOSR)
- OSTI Identifier:
- 1996502
- Grant/Contract Number:
- AC02-06CH11357
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Integrating Materials and Manufacturing Innovation
- Additional Journal Information:
- Journal Volume: 10; Journal Issue: 4; Journal ID: ISSN 2193-9764
- Publisher:
- Springer
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; EDXRD; additive manufacturing; energy-dispersive diffraction; laser powder bed fusion; residual strain; selective laser melting
Citation Formats
Chuang, Andrew C., Park, Jun-Sang, Shade, Paul A., Schwalbach, Edwin J., Groeber, Michael A., and Musinski, William D. AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction. United States: N. p., 2021.
Web. doi:10.1007/s40192-021-00233-4.
Chuang, Andrew C., Park, Jun-Sang, Shade, Paul A., Schwalbach, Edwin J., Groeber, Michael A., & Musinski, William D. AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction. United States. https://doi.org/10.1007/s40192-021-00233-4
Chuang, Andrew C., Park, Jun-Sang, Shade, Paul A., Schwalbach, Edwin J., Groeber, Michael A., and Musinski, William D. Mon .
"AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction". United States. https://doi.org/10.1007/s40192-021-00233-4. https://www.osti.gov/servlets/purl/1996502.
@article{osti_1996502,
title = {AFRL Additive Manufacturing Modeling Series: Challenge 1, Characterization of Residual Strain Distribution in Additively-Manufactured Metal Parts Using Energy-Dispersive Diffraction},
author = {Chuang, Andrew C. and Park, Jun-Sang and Shade, Paul A. and Schwalbach, Edwin J. and Groeber, Michael A. and Musinski, William D.},
abstractNote = {A machine component fabricated by additive manufacturing (AM) of metal powders often possesses steep residual stress gradients with significant magnitudes due to large temperature gradients that transpire within a localized area during fabrication. These processing-induced residual stresses can cause distortion of the part, and if they are of significant magnitude, they could induce cracking of the component, degrade printability, and/or diminish subsequent mechanical performance. The ability to predict these residual stresses imparted by AM is an important step in permeating AM technology for advanced manufacturing. Calibration and validation of AM process models used for prediction are, therefore, a critical step in understanding the origin and mitigating the challenges associated with residual stresses inherent to the AM process. In the present work, the residual strain distributions in components with simple geometries fabricated by a laser powder bed fusion (LBPF) process were characterized non-destructively using energy-dispersive X-ray diffraction in support of the US Air Force Research Laboratory Additive Manufacturing Modeling Challenge Series Groeber et al. (JOM 70:441-448, 2018). The measurement setup and approach are described in detail so that the data can be used as a benchmark to calibrate and validate models for the prediction of macro-scale residual stresses due to the LPBF process.},
doi = {10.1007/s40192-021-00233-4},
journal = {Integrating Materials and Manufacturing Innovation},
number = 4,
volume = 10,
place = {United States},
year = {Mon Oct 25 00:00:00 EDT 2021},
month = {Mon Oct 25 00:00:00 EDT 2021}
}
Works referenced in this record:
Benchmarking build simulation software for laser powder bed fusion of metals
journal, December 2020
- Peter, Noha; Pitts, Zachary; Thompson, Spencer
- Additive Manufacturing, Vol. 36
Residual stresses in selective laser sintering and selective laser melting
journal, October 2006
- Mercelis, Peter; Kruth, Jean‐Pierre
- Rapid Prototyping Journal, Vol. 12, Issue 5
A Kriging-Based Approach to Autonomous Experimentation with Applications to X-Ray Scattering
journal, August 2019
- Noack, Marcus M.; Yager, Kevin G.; Fukuto, Masafumi
- Scientific Reports, Vol. 9, Issue 1
Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
journal, May 2018
- Shipley, H.; McDonnell, D.; Culleton, M.
- International Journal of Machine Tools and Manufacture, Vol. 128
Microstructure evolution and EBSD analysis of a graded steel fabricated by laser additive manufacturing
journal, July 2017
- Wang, Qiang; Zhang, Song; Zhang, ChunHua
- Vacuum, Vol. 141
Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation
journal, October 2016
- Parry, L.; Ashcroft, I. A.; Wildman, R. D.
- Additive Manufacturing, Vol. 12
Powder diffraction peak shapes. Parameterization of the pseudo-Voigt as a Voigt function
journal, February 1986
- David, W. I. F.
- Journal of Applied Crystallography, Vol. 19, Issue 1
Predicting the Peen Forming Effectiveness of Ti-6Al-4V Strips With Different Thicknesses Using Realistic Finite Element Simulations
journal, November 2015
- Yang, Fan; Gao, Yukui
- Journal of Engineering Materials and Technology, Vol. 138, Issue 1
Determination of residual stress in a microtextured α titanium component using high-energy synchrotron X-rays
journal, May 2016
- Park, Jun-Sang; Ray, Atish K.; Dawson, Paul R.
- The Journal of Strain Analysis for Engineering Design, Vol. 51, Issue 5
An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
journal, May 2018
- Calta, Nicholas P.; Wang, Jenny; Kiss, Andrew M.
- Review of Scientific Instruments, Vol. 89, Issue 5
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
journal, December 2015
- Lu, Yanjin; Wu, Songquan; Gan, Yiliang
- Optics & Laser Technology, Vol. 75
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
journal, September 2015
- Li, Shuai; Wei, Qingsong; Shi, Yusheng
- Journal of Materials Science & Technology, Vol. 31, Issue 9
AFRL Additive Manufacturing Modeling Challenge Series: Overview
journal, June 2021
- Cox, Marie E.; Schwalbach, Edwin J.; Blaiszik, Ben J.
- Integrating Materials and Manufacturing Innovation, Vol. 10, Issue 2
Scientific, technological and economic issues in metal printing and their solutions
journal, July 2019
- DebRoy, T.; Mukherjee, T.; Milewski, J. O.
- Nature Materials, Vol. 18, Issue 10
Simulation of residual stresses by shot peening
journal, July 1999
- Schiffner, K.; Droste gen. Helling, C.
- Computers & Structures, Vol. 72, Issue 1-3
Mechanistic models for additive manufacturing of metallic components
journal, February 2021
- Wei, H. L.; Mukherjee, T.; Zhang, W.
- Progress in Materials Science, Vol. 116
Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
journal, April 2015
- Carroll, Beth E.; Palmer, Todd A.; Beese, Allison M.
- Acta Materialia, Vol. 87
AFRL Additive Manufacturing Modeling Series: Challenge 2, Microscale Process-to-Structure Data Description
journal, June 2021
- Schwalbach, Edwin J.; Chapman, Michael G.; Groeber, Michael A.
- Integrating Materials and Manufacturing Innovation, Vol. 10, Issue 3
Fatigue behavior of IN718 microtrusses produced via additive manufacturing
journal, September 2016
- Huynh, Lena; Rotella, John; Sangid, Michael D.
- Materials & Design, Vol. 105
Texture analysis of additively manufactured Ti-6Al-4V using neutron diffraction
journal, October 2018
- Pesach, Asaf; Tiferet, Eitan; Vogel, Sven C.
- Additive Manufacturing, Vol. 23
Optimizing the structure accuracy by changing the scanning strategy using selective laser melting
journal, January 2018
- Han, Jitai; Wu, Meiping; Ge, Yanan
- The International Journal of Advanced Manufacturing Technology, Vol. 95, Issue 9-12
Standardized X-ray tomography testing of additively manufactured parts: A round robin test
journal, December 2018
- du Plessis, Anton; le Roux, Stephan G.
- Additive Manufacturing, Vol. 24
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties
journal, March 2020
- Seede, Raiyan; Shoukr, David; Zhang, Bing
- Acta Materialia, Vol. 186
Additive manufacturing technologies: state of the art and trends
journal, November 2015
- Gardan, Julien
- International Journal of Production Research, Vol. 54, Issue 10
Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference
journal, February 2020
- Levine, Lyle; Lane, Brandon; Heigel, Jarred
- Integrating Materials and Manufacturing Innovation, Vol. 9, Issue 1
Use of Kriging Models to Approximate Deterministic Computer Models
journal, April 2005
- Martin, Jay D.; Simpson, Timothy W.
- AIAA Journal, Vol. 43, Issue 4
Crystallographic texture in an additively manufactured nickel-base superalloy
journal, January 2017
- Ma, Dong; Stoica, Alexandru D.; Wang, Zhuqing
- Materials Science and Engineering: A, Vol. 684
Investigation of accuracy and dimensional limits of part produced in aluminum alloy by selective laser melting
journal, April 2016
- Calignano, F.; Lorusso, M.; Pakkanen, J.
- The International Journal of Advanced Manufacturing Technology, Vol. 88, Issue 1-4
Elastic Residual Strain and Stress Measurements and Corresponding Part Deflections of 3D Additive Manufacturing Builds of IN625 AM-Bench Artifacts Using Neutron Diffraction, Synchrotron X-Ray Diffraction, and Contour Method
journal, July 2019
- Phan, Thien Q.; Strantza, Maria; Hill, Michael R.
- Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 3
Non-destructive characterization of additively manufactured components with x-ray computed tomography for part qualification: A study with laboratory and synchrotron x-rays
journal, March 2021
- Cakmak, Ercan; Bingham, Philip; Cunningham, Ross W.
- Materials Characterization, Vol. 173
Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies
journal, April 2010
- Tolosa, Itziar; Garciandía, Fermín; Zubiri, Fidel
- The International Journal of Advanced Manufacturing Technology, Vol. 51, Issue 5-8
In-Situ High-Energy X-ray Diffraction During a Linear Deposition of 308 Stainless Steel via Wire Arc Additive Manufacture
journal, January 2020
- Brown, D. W.; Losko, A.; Carpenter, J. S.
- Metallurgical and Materials Transactions A, Vol. 51, Issue 3
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
journal, January 2017
- Nishita, Michiru; Park, Seung-Yeol; Nishio, Tadashi
- Scientific Reports, Vol. 7, Issue 1
On the calculation of the gauge volume size for energy-dispersive X-ray diffraction
journal, September 2011
- Rowles, Matthew R.
- Journal of Synchrotron Radiation, Vol. 18, Issue 6
Epidemiologic Mapping using the “Kriging” Method: Application to an Influenza-like Epidemic in France
journal, June 1992
- Carrat, Fabrice; Valleron, Alain-Jacques
- American Journal of Epidemiology, Vol. 135, Issue 11
Non-Destructive Characterization of Engineering Materials Using High-Energy X-rays at the Advanced Photon Source
journal, May 2017
- Park, Jun-Sang; Okasinski, John; Chatterjee, Kamalika
- Synchrotron Radiation News, Vol. 30, Issue 3
Measurement and modelling of residual stress in wire-feed additively manufactured titanium
journal, June 2018
- Ahmad, Bilal; van der Veen, Sjoerd O.; Fitzpatrick, Michael E.
- Materials Science and Technology, Vol. 34, Issue 18
AFRL Additive Manufacturing Modeling Series: Challenge 4, 3D Reconstruction of an IN625 High-Energy Diffraction Microscopy Sample Using Multi-modal Serial Sectioning
journal, June 2021
- Chapman, Michael G.; Shah, Megna N.; Donegan, Sean P.
- Integrating Materials and Manufacturing Innovation, Vol. 10, Issue 2
AFRL Additive Manufacturing Modeling Series: Challenge 4, In Situ Mechanical Test of an IN625 Sample with Concurrent High-Energy Diffraction Microscopy Characterization
journal, June 2021
- Menasche, David B.; Musinski, William D.; Obstalecki, Mark
- Integrating Materials and Manufacturing Innovation, Vol. 10, Issue 3
Optimization of selective laser melting process parameters for Ti-6Al-4V alloy manufacturing using deep learning
journal, July 2020
- Nguyen, Dinh Son; Park, Hong Seok; Lee, Chang Myung
- Journal of Manufacturing Processes, Vol. 55
Stress and Distortion Simulation of Additive Manufacturing Process by High Performance Computing
conference, October 2018
- Huang, Hui; Chen, Jian; Carlson, Blair
- ASME 2018 Pressure Vessels and Piping Conference, Volume 6A: Materials and Fabrication
The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks
journal, October 2004
- Daymond, Mark R.
- Journal of Applied Physics, Vol. 96, Issue 8
Microstructure characterization and mechanical behavior of laser additive manufactured ultrahigh-strength AerMet100 steel
journal, April 2016
- Ran, Xianzhe; Liu, Dong; Li, An
- Materials Science and Engineering: A, Vol. 663
In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
journal, November 2017
- Kenel, C.; Grolimund, D.; Li, X.
- Scientific Reports, Vol. 7, Issue 1
The status, challenges, and future of additive manufacturing in engineering
journal, December 2015
- Gao, Wei; Zhang, Yunbo; Ramanujan, Devarajan
- Computer-Aided Design, Vol. 69
Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
journal, February 2015
- Bian, Linkan; Thompson, Scott M.; Shamsaei, Nima
- JOM, Vol. 67, Issue 3
The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements
journal, May 2006
- Korsunsky, Alexander M.; Vorster, Willem J. J.; Zhang, Shu Yan
- Acta Materialia, Vol. 54, Issue 8
Review on characterization and impacts of the lattice structure in additive manufacturing
journal, January 2020
- Nagesha, B. K.; Dhinakaran, V.; Varsha Shree, M.
- Materials Today: Proceedings, Vol. 21
Review on residual stress in selective laser melting additive manufacturing of alloy parts
journal, September 2020
- Fang, Ze-Chen; Wu, Zhi-Lin; Huang, Chen-Guang
- Optics & Laser Technology, Vol. 129
Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
journal, March 2017
- Kreitcberg, Alena; Brailovski, Vladimir; Turenne, Sylvain
- Materials Science and Engineering: A, Vol. 689
Residual stress redistribution in shot peened samples subject to mechanical loading
journal, October 2014
- Buchanan, Dennis J.; John, Reji
- Materials Science and Engineering: A, Vol. 615
Fatigue Crack Propagation and Fracture Toughness of Laser Rapid Manufactured Structures of AISI 316L Stainless Steel
journal, January 2014
- Ganesh, P.; Kaul, Rakesh; Sasikala, G.
- Metallography, Microstructure, and Analysis, Vol. 3, Issue 1
Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing
journal, December 2017
- An, Ke; Yuan, Lang; Dial, Laura
- Materials & Design, Vol. 135