Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells
Abstract
Abstract Numerous previous reports on the sequential deposition (SD) technique have demonstrated that this approach can achieve a p‐ i ‐n active layer architecture with an ideal vertical composition gradient, which is one of the critical factors that can influence the physical processes that determine the photovoltaic performance of organic solar cells. Herein, a commonly used photovoltaic system comprised of PM6 as a donor and Y6 as an acceptor is investigated with respect to sequential blade‐processing deposition to comprehensively explore the morphology characteristics as a function of baseplate temperature. A systematic study of the temperature‐dependent blend morphology elucidates the SD‐processed configuration merits and device physics behind temperature‐controlled degree of vertical composition gradient, and constructs the temperature‐microstructure‐property relationship for the corresponding photovoltaic parameters. The result shows, as the temperature increases, the morphology of the active layer has undergone a distinct evolution from the pseudo‐bulk heterojunction to a pseudo‐planar heterojunction and then to a pseudo‐planar bilayer, leading to a non‐monotonic correlation between baseplate temperature and device performance. This investigation not only reveals the importance of precisely controlling baseplate temperature for gaining vertical morphology control, but also provides a path toward rational optimization of device performance in the lab‐to‐fab transition.
- Authors:
-
- Wuhan Univ. (China)
- Xi'an Jiaotong Univ. (China)
- Shandong Univ., Jinan (China)
- North Carolina State University, Raleigh, NC (United States)
- Xi'an Jiaotong Univ., (China)
- Wuhan Univ. (China) ; South China Univ. of Technology (SCUT), Guangzhou (China); Zhengzhou University (China)
- Publication Date:
- Research Org.:
- Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Advanced Light Source (ALS)
- Sponsoring Org.:
- USDOE; National Natural Science Foundation of China (NSFC); US Department of the Navy, Office of Naval Research (ONR)
- OSTI Identifier:
- 1981371
- Alternate Identifier(s):
- OSTI ID: 1997049
- Grant/Contract Number:
- AC02-05CH11231; 51773157; 52061135206; N000142012155; DE‐AC02‐05CH11231
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Advanced Energy Materials
- Additional Journal Information:
- Journal Volume: 11; Journal Issue: 45; Journal ID: ISSN 1614-6832
- Publisher:
- Wiley
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 14 SOLAR ENERGY; Chemistry; Energy & Fuels; Materials Science; Physics; D/A mixed region; Morphology evolution; Organic solar cells; Processing temperature; Sequential deposition technology
Citation Formats
Zheng, Yina, Sun, Rui, Zhang, Meng, Chen, Zhihao, Peng, Zhengxing, Wu, Qiang, Yuan, Xinxin, Yu, Yue, Wang, Tao, Wu, Yao, Hao, Xiaotao, Lu, Guanghao, Ade, Harald, and Min, Jie. Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells. United States: N. p., 2021.
Web. doi:10.1002/aenm.202102135.
Zheng, Yina, Sun, Rui, Zhang, Meng, Chen, Zhihao, Peng, Zhengxing, Wu, Qiang, Yuan, Xinxin, Yu, Yue, Wang, Tao, Wu, Yao, Hao, Xiaotao, Lu, Guanghao, Ade, Harald, & Min, Jie. Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells. United States. https://doi.org/10.1002/aenm.202102135
Zheng, Yina, Sun, Rui, Zhang, Meng, Chen, Zhihao, Peng, Zhengxing, Wu, Qiang, Yuan, Xinxin, Yu, Yue, Wang, Tao, Wu, Yao, Hao, Xiaotao, Lu, Guanghao, Ade, Harald, and Min, Jie. Sun .
"Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells". United States. https://doi.org/10.1002/aenm.202102135. https://www.osti.gov/servlets/purl/1981371.
@article{osti_1981371,
title = {Baseplate Temperature–Dependent Vertical Composition Gradient in Pseudo–Bilayer Films for Printing Non–Fullerene Organic Solar Cells},
author = {Zheng, Yina and Sun, Rui and Zhang, Meng and Chen, Zhihao and Peng, Zhengxing and Wu, Qiang and Yuan, Xinxin and Yu, Yue and Wang, Tao and Wu, Yao and Hao, Xiaotao and Lu, Guanghao and Ade, Harald and Min, Jie},
abstractNote = {Abstract Numerous previous reports on the sequential deposition (SD) technique have demonstrated that this approach can achieve a p‐ i ‐n active layer architecture with an ideal vertical composition gradient, which is one of the critical factors that can influence the physical processes that determine the photovoltaic performance of organic solar cells. Herein, a commonly used photovoltaic system comprised of PM6 as a donor and Y6 as an acceptor is investigated with respect to sequential blade‐processing deposition to comprehensively explore the morphology characteristics as a function of baseplate temperature. A systematic study of the temperature‐dependent blend morphology elucidates the SD‐processed configuration merits and device physics behind temperature‐controlled degree of vertical composition gradient, and constructs the temperature‐microstructure‐property relationship for the corresponding photovoltaic parameters. The result shows, as the temperature increases, the morphology of the active layer has undergone a distinct evolution from the pseudo‐bulk heterojunction to a pseudo‐planar heterojunction and then to a pseudo‐planar bilayer, leading to a non‐monotonic correlation between baseplate temperature and device performance. This investigation not only reveals the importance of precisely controlling baseplate temperature for gaining vertical morphology control, but also provides a path toward rational optimization of device performance in the lab‐to‐fab transition.},
doi = {10.1002/aenm.202102135},
journal = {Advanced Energy Materials},
number = 45,
volume = 11,
place = {United States},
year = {Sun Oct 17 00:00:00 EDT 2021},
month = {Sun Oct 17 00:00:00 EDT 2021}
}
Works referenced in this record:
Real-Time Tracking of Polymer Crystallization Dynamics in Organic Bulk Heterojunctions by Raman Microscopy
journal, August 2018
- Mannanov, Artur A.; Bruevich, Vladimir V.; Feldman, Elizaveta V.
- The Journal of Physical Chemistry C, Vol. 122, Issue 34
Layer-by-Layer Processed Organic Solar Cells
journal, April 2016
- Wang, Yifan; Zhan, Xiaowei
- Advanced Energy Materials, Vol. 6, Issue 17
Nanoscale structure measurements for polymer-fullerene photovoltaics
journal, January 2012
- DeLongchamp, Dean M.; Kline, R. Joseph; Herzing, Andrew
- Energy & Environmental Science, Vol. 5, Issue 3
A universal method for constructing high efficiency organic solar cells with stacked structures
journal, January 2021
- Wei, Yanan; Yu, Jianwei; Qin, Linqing
- Energy & Environmental Science, Vol. 14, Issue 4
Miscibility-Function Relations in Organic Solar Cells: Significance of Optimal Miscibility in Relation to Percolation
journal, January 2018
- Ye, Long; Collins, Brian A.; Jiao, Xuechen
- Advanced Energy Materials, Vol. 8, Issue 28
Vertical Composition Distribution and Crystallinity Regulations Enable High-Performance Polymer Solar Cells with >17% Efficiency
journal, October 2020
- Li, Qingduan; Wang, Li-Ming; Liu, Shengjian
- ACS Energy Letters, Vol. 5, Issue 11
Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors
journal, June 2021
- Sun, Rui; Wang, Wei; Yu, Han
- Joule, Vol. 5, Issue 6
Sequential Deposition of Organic Films with Eco‐Compatible Solvents Improves Performance and Enables Over 12%‐Efficiency Nonfullerene Solar Cells
journal, March 2019
- Ye, Long; Xiong, Yuan; Chen, Zheng
- Advanced Materials, Vol. 31, Issue 17
Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint
journal, April 2017
- Richter, Lee J.; DeLongchamp, Dean M.; Amassian, Aram
- Chemical Reviews, Vol. 117, Issue 9
Layer-by-layer fabrication of organic photovoltaic devices: material selection and processing conditions
journal, January 2021
- Faure, Marie D. M.; Lessard, Benoît H.
- Journal of Materials Chemistry C, Vol. 9, Issue 1
In Situ GIWAXS Analysis of Solvent and Additive Effects on PTB7 Thin Film Microstructure Evolution during Spin Coating
journal, October 2017
- Manley, Eric F.; Strzalka, Joseph; Fauvell, Thomas J.
- Advanced Materials, Vol. 29, Issue 43
Regulating Bulk‐Heterojunction Molecular Orientations through Surface Free Energy Control of Hole‐Transporting Layers for High‐Performance Organic Solar Cells
journal, March 2019
- Wang, Jianqiu; Zheng, Zhong; Zhang, Dongyang
- Advanced Materials, Vol. 31, Issue 17
Planar heterojunctions for reduced non-radiative open-circuit voltage loss and enhanced stability of organic solar cells
journal, January 2021
- Li, Yawen; Lin, Yuze
- Journal of Materials Chemistry C, Vol. 9, Issue 35
Finely Tuned Cores in Star‐Shaped Zwitterionic Molecules for Interface Engineering of High‐Performance Polymer Solar Cells
journal, July 2019
- Yang, Wenyan; Guo, Jie; Sun, Rui
- Solar RRL, Vol. 3, Issue 10
In Operando GISAXS and GIWAXS Stability Study of Organic Solar Cells Based on PffBT4T‐2OD:PC 71 BM with and without Solvent Additive
journal, July 2020
- Yang, Dan; Löhrer, Franziska C.; Körstgens, Volker
- Advanced Science, Vol. 7, Issue 16
Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis
journal, April 2012
- Gann, E.; Young, A. T.; Collins, B. A.
- Review of Scientific Instruments, Vol. 83, Issue 4
A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator
journal, October 2010
- Hexemer, Alexander; Bras, Wim; Glossinger, James
- Journal of Physics: Conference Series, Vol. 247
Small-Molecule Solar Cells with Fill Factors up to 0.75 via a Layer-by-Layer Solution Process
journal, August 2013
- Lin, Yuze; Ma, Lanchao; Li, Yongfang
- Advanced Energy Materials, Vol. 4, Issue 1
In situ Measuring Film-Depth-Dependent Light Absorption Spectra for Organic Photovoltaics
journal, April 2020
- Feng, Xiang; Wang, Yuheng; Xiao, Tong
- Frontiers in Chemistry, Vol. 8
Molecular Engineering and Morphology Control of Polythiophene:Nonfullerene Acceptor Blends for High‐Performance Solar Cells
journal, October 2020
- Wang, Qi; Qin, Yunpeng; Li, Miaomiao
- Advanced Energy Materials, Vol. 10, Issue 45
Increasing Quantum Efficiency of Polymer Solar Cells with Efficient Exciton Splitting and Long Carrier Lifetime by Molecular Doping at Heterojunctions
journal, May 2019
- Yan, Han; Tang, Yabing; Sui, Xinyu
- ACS Energy Letters, Vol. 4, Issue 6
High‐Performance All‐Polymer Solar Cells with a Pseudo‐Bilayer Configuration Enabled by a Stepwise Optimization Strategy
journal, February 2021
- Wu, Qiang; Wang, Wei; Wu, Yao
- Advanced Functional Materials, Vol. 31, Issue 15
Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation
journal, October 2019
- Zhang, Jiangbin; Futscher, Moritz H.; Lami, Vincent
- Advanced Energy Materials, Vol. 9, Issue 47
The influence of molecular orientation on organic bulk heterojunction solar cells
journal, April 2014
- Tumbleston, John R.; Collins, Brian A.; Yang, Liqiang
- Nature Photonics, Vol. 8, Issue 5
Transient photocurrent and photovoltage mapping for characterisation of defects in organic photovoltaics
journal, March 2017
- Wood, Sebastian; O'Connor, Daniel; Jones, Christopher W.
- Solar Energy Materials and Solar Cells, Vol. 161
A multi-objective optimization-based layer-by-layer blade-coating approach for organic solar cells: rational control of vertical stratification for high performance
journal, January 2019
- Sun, Rui; Guo, Jie; Wu, Qiang
- Energy & Environmental Science, Vol. 12, Issue 10
Effects of Alkyl Terminal Chains on Morphology, Charge Generation, Transport, and Recombination Mechanisms in Solution-Processed Small Molecule Bulk Heterojunction Solar Cells
journal, June 2015
- Min, Jie; Luponosov, Yuriy N.; Gasparini, Nicola
- Advanced Energy Materials, Vol. 5, Issue 17
A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency
journal, February 2020
- Sun, Rui; Wu, Qiang; Guo, Jie
- Joule, Vol. 4, Issue 2
The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques
journal, February 2014
- Müller-Buschbaum, Peter
- Advanced Materials, Vol. 26, Issue 46
Sequential Deposition of Donor and Acceptor Provides High‐Performance Semitransparent Organic Photovoltaics Having a Pseudo p–i–n Active Layer Structure
journal, January 2021
- Wang, Hao‐Cheng; Cheng, Pei; Tan, Shaun
- Advanced Energy Materials, Vol. 11, Issue 13
Delineation of Thermodynamic and Kinetic Factors that Control Stability in Non-fullerene Organic Solar Cells
journal, May 2019
- Ghasemi, Masoud; Hu, Huawei; Peng, Zhengxing
- Joule, Vol. 3, Issue 5
A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells
journal, January 2019
- Sun, Rui; Guo, Jing; Sun, Chenkai
- Energy & Environmental Science, Vol. 12, Issue 1
High efficiency and stability small molecule solar cells developed by bulk microstructure fine-tuning
journal, October 2016
- Min, Jie; Jiao, Xuechen; Sgobba, Vito
- Nano Energy, Vol. 28
Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells
journal, June 2020
- Yao, Jia; Qiu, Beibei; Zhang, Zhi-Guo
- Nature Communications, Vol. 11, Issue 1
Side‐Chain Engineering on Y‐Series Acceptors with Chlorinated End Groups Enables High‐Performance Organic Solar Cells
journal, April 2021
- Chen, Yuzhong; Ma, Ruijie; Liu, Tao
- Advanced Energy Materials, Vol. 11, Issue 20
A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
journal, July 2015
- Zhang, Maojie; Guo, Xia; Ma, Wei
- Advanced Materials, Vol. 27, Issue 31
Recent Advances in Morphology Optimization for Organic Photovoltaics
journal, June 2018
- Lee, Hansol; Park, Chaneui; Sin, Dong Hun
- Advanced Materials, Vol. 30, Issue 34
Precise Manipulation of Multilength Scale Morphology and Its Influence on Eco-Friendly Printed All-Polymer Solar Cells
journal, July 2017
- Ye, Long; Xiong, Yuan; Li, Sunsun
- Advanced Functional Materials, Vol. 27, Issue 33
Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells
journal, June 2020
- Weng, Kangkang; Ye, Linglong; Zhu, Lei
- Nature Communications, Vol. 11, Issue 1
Emerging Approaches in Enhancing the Efficiency and Stability in Non‐Fullerene Organic Solar Cells
journal, November 2020
- Zhao, Fuwen; Zhang, Huotian; Zhang, Rui
- Advanced Energy Materials, Vol. 10, Issue 47
Quenching to the Percolation Threshold in Organic Solar Cells
journal, February 2019
- Ye, Long; Li, Sunsun; Liu, Xiaoyu
- Joule, Vol. 3, Issue 2
Reappraising the Need for Bulk Heterojunctions in Polymer−Fullerene Photovoltaics: The Role of Carrier Transport in All-Solution-Processed P3HT/PCBM Bilayer Solar Cells
journal, October 2009
- Ayzner, Alexander L.; Tassone, Christopher J.; Tolbert, Sarah H.
- The Journal of Physical Chemistry C, Vol. 113, Issue 46
Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double‐Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells
journal, September 2020
- Qin, Yunpeng; Xu, Ye; Peng, Zhengxing
- Advanced Functional Materials, Vol. 30, Issue 46
Effect of Isomerization on High-Performance Nonfullerene Electron Acceptors
journal, June 2018
- Wang, Jiayu; Zhang, Junxiang; Xiao, Yiqun
- Journal of the American Chemical Society, Vol. 140, Issue 29
Importance of Domain Purity and Molecular Packing in Efficient Solution-Processed Small-Molecule Solar Cells
journal, December 2014
- Mukherjee, Subhrangsu; Proctor, Christopher M.; Tumbleston, John R.
- Advanced Materials, Vol. 27, Issue 6
Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells
journal, March 2018
- Yang, Liyan; Zhang, Shaoqing; He, Chang
- Chemistry of Materials, Vol. 30, Issue 6
Layer‐by‐Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%
journal, February 2021
- Zhan, Lingling; Li, Shuixing; Xia, Xinxin
- Advanced Materials, Vol. 33, Issue 12
Printable and Large‐Area Organic Solar Cells Enabled by a Ternary Pseudo‐Planar Heterojunction Strategy
journal, July 2020
- Liu, Siqi; Chen, Dong; Hu, Xiaotian
- Advanced Functional Materials, Vol. 30, Issue 36
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
journal, April 2019
- Yuan, Jun; Zhang, Yunqiang; Zhou, Liuyang
- Joule, Vol. 3, Issue 4
Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High-Efficiency Solution-Processed Small-Molecule BHJ Solar Cells
journal, July 2015
- Mukherjee, Subhrangsu; Proctor, Christopher M.; Bazan, Guillermo C.
- Advanced Energy Materials, Vol. 5, Issue 21
Balancing the efficiency, stability, and cost potential for organic solar cells via a new figure of merit
journal, May 2021
- Yang, Wenyan; Wang, Wei; Wang, Yuheng
- Joule, Vol. 5, Issue 5
In Situ Analysis of Solvent and Additive Effects on Film Morphology Evolution in Spin-Cast Small-Molecule and Polymer Photovoltaic Materials
journal, May 2018
- Manley, Eric F.; Strzalka, Joseph; Fauvell, Thomas J.
- Advanced Energy Materials, Vol. 8, Issue 23
Pseudo-bilayer architecture enables high-performance organic solar cells with enhanced exciton diffusion length
journal, January 2021
- Jiang, Kui; Zhang, Jie; Peng, Zhengxing
- Nature Communications, Vol. 12, Issue 1
Spontaneous open-circuit voltage gain of fully fabricated organic solar cells caused by elimination of interfacial energy disorder
journal, January 2019
- Sun, Rui; Deng, Dan; Guo, Jing
- Energy & Environmental Science, Vol. 12, Issue 8
Time-Dependent Morphology Evolution of Solution-Processed Small Molecule Solar Cells during Solvent Vapor Annealing
journal, March 2016
- Min, Jie; Jiao, Xuechen; Ata, Ibrahim
- Advanced Energy Materials, Vol. 6, Issue 10
The Path to 20% Power Conversion Efficiencies in Nonfullerene Acceptor Organic Solar Cells
journal, December 2020
- Karki, Akchheta; Gillett, Alexander J.; Friend, Richard H.
- Advanced Energy Materials, Vol. 11, Issue 15
Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC 71 BM Solar Cells
journal, October 2012
- Collins, Brian A.; Li, Zhe; Tumbleston, John R.
- Advanced Energy Materials, Vol. 3, Issue 1
Self-filtering narrowband high performance organic photodetectors enabled by manipulating localized Frenkel exciton dissociation
journal, June 2020
- Xie, Boming; Xie, Ruihao; Zhang, Kai
- Nature Communications, Vol. 11, Issue 1
Morphology Control in Organic Solar Cells
journal, March 2018
- Zhao, Fuwen; Wang, Chunru; Zhan, Xiaowei
- Advanced Energy Materials, Vol. 8, Issue 28
Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency
journal, January 2020
- An, Qiaoshi; Wang, Junwei; Ma, Xiaoling
- Energy & Environmental Science, Vol. 13, Issue 12
A molecular interaction–diffusion framework for predicting organic solar cell stability
journal, January 2021
- Ghasemi, Masoud; Balar, Nrup; Peng, Zhengxing
- Nature Materials, Vol. 20, Issue 4
Efficient Exciton Diffusion in Organic Bilayer Heterojunctions with Nonfullerene Small Molecular Acceptors
journal, April 2020
- Lee, Tack Ho; Park, Song Yi; Park, Won-Woo
- ACS Energy Letters, Vol. 5, Issue 5
Molecular orientation control of semiconducting molecules using a metal layer formed by wet processing
journal, December 2018
- Yamamoto, Kohei; Shahiduzzaman, Md.; Yamada, Akihiro
- Organic Electronics, Vol. 63
Alkyl Chain Tuning of Small Molecule Acceptors for Efficient Organic Solar Cells
journal, December 2019
- Jiang, Kui; Wei, Qingya; Lai, Joshua Yuk Lin
- Joule, Vol. 3, Issue 12
Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo‐Planar Heterojunction Solar Cells by Additives Treatment
journal, January 2021
- He, Qiannan; Sheng, Wangping; Zhang, Ming
- Advanced Energy Materials, Vol. 11, Issue 7
Improving Active Layer Morphology of All-Polymer Solar Cells by Solution Temperature
journal, April 2020
- Wang, Ning; Yu, Yingjian; Zhao, Ruyan
- Macromolecules, Vol. 53, Issue 9