A field programmable gate array-based timing and control system for the dynamic compression sector
Abstract
A field programmable gate array (FPGA)-based timing and trigger control system has been developed for the Dynamic Compression Sector (DCS) user facility located at the Advanced Photon Source (APS) at Argonne National Laboratory. The DCS is a first-of-its-kind capability dedicated to dynamic compression science. All components of the DCS laser shock station—x-ray choppers, single-shot shutter, internal laser triggers, and shot diagnostics—must be synchronized with respect to the arrival of x rays in the hutch. An FPGA synchronized to the APS storage ring radio frequency clock (352 MHz) generates trigger signals for each stage of the laser and x-ray shutter system with low jitter. The developed FPGA-based control system was the first system used to control the laser and the shutter system since its commissioning, and it has been developing since then to improve the timing jitter. The system is composed of a Zynq FPGA, a debug card, line drivers, and a power supply. The delay and offsets of the trigger signals can be adjusted by using a user-friendly graphical user interface with high precision. Here, the details of the system architecture, timing requirements, firmware, and software implementation along with the performance evaluation are presented in this paper. The system offersmore »
- Authors:
-
- Argonne National Lab. (ANL), Lemont, IL (United States)
- Washington State Univ., Pullman, WA (United States)
- Publication Date:
- Research Org.:
- Washington State Univ., Pullman, WA (United States). Inst. for Shock Physics
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA), Office of Defense Programs (DP)
- OSTI Identifier:
- 1878342
- Grant/Contract Number:
- NA0003957
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Review of Scientific Instruments
- Additional Journal Information:
- Journal Volume: 93; Journal Issue: 4; Journal ID: ISSN 0034-6748
- Publisher:
- American Institute of Physics (AIP)
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 47 OTHER INSTRUMENTATION; Field programmable gate array; Digital signal processing; Measuring instruments; X-rays; Synchrotron radiation; Storage rings; Time-digital conversion
Citation Formats
Saxena, Shefali, Paskvan, Daniel R., Weir, Nicholas R., and Sinclair, Nicholas. A field programmable gate array-based timing and control system for the dynamic compression sector. United States: N. p., 2022.
Web. doi:10.1063/5.0081205.
Saxena, Shefali, Paskvan, Daniel R., Weir, Nicholas R., & Sinclair, Nicholas. A field programmable gate array-based timing and control system for the dynamic compression sector. United States. https://doi.org/10.1063/5.0081205
Saxena, Shefali, Paskvan, Daniel R., Weir, Nicholas R., and Sinclair, Nicholas. Tue .
"A field programmable gate array-based timing and control system for the dynamic compression sector". United States. https://doi.org/10.1063/5.0081205. https://www.osti.gov/servlets/purl/1878342.
@article{osti_1878342,
title = {A field programmable gate array-based timing and control system for the dynamic compression sector},
author = {Saxena, Shefali and Paskvan, Daniel R. and Weir, Nicholas R. and Sinclair, Nicholas},
abstractNote = {A field programmable gate array (FPGA)-based timing and trigger control system has been developed for the Dynamic Compression Sector (DCS) user facility located at the Advanced Photon Source (APS) at Argonne National Laboratory. The DCS is a first-of-its-kind capability dedicated to dynamic compression science. All components of the DCS laser shock station—x-ray choppers, single-shot shutter, internal laser triggers, and shot diagnostics—must be synchronized with respect to the arrival of x rays in the hutch. An FPGA synchronized to the APS storage ring radio frequency clock (352 MHz) generates trigger signals for each stage of the laser and x-ray shutter system with low jitter. The developed FPGA-based control system was the first system used to control the laser and the shutter system since its commissioning, and it has been developing since then to improve the timing jitter. The system is composed of a Zynq FPGA, a debug card, line drivers, and a power supply. The delay and offsets of the trigger signals can be adjusted by using a user-friendly graphical user interface with high precision. Here, the details of the system architecture, timing requirements, firmware, and software implementation along with the performance evaluation are presented in this paper. The system offers low timing jitter (15.5 ps rms) with respect to the APS 352 MHz clock, suitable for the 100 ps (FWHM) x-ray bunch duration at the APS.},
doi = {10.1063/5.0081205},
journal = {Review of Scientific Instruments},
number = 4,
volume = 93,
place = {United States},
year = {Tue Apr 19 00:00:00 EDT 2022},
month = {Tue Apr 19 00:00:00 EDT 2022}
}
Works referenced in this record:
An FPGA-based trigger system for the search of μ + → e + +γ decay in the MEG experiment
journal, January 2013
- Galli, L.; Cei, F.; Galeotti, S.
- Journal of Instrumentation, Vol. 8, Issue 01
FPGA-based trigger system for the LUX dark matter experiment
journal, May 2016
- Akerib, D. S.; Araújo, H. M.; Bai, X.
- Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 818
An auto-incrementing nanosecond delay circuit
journal, September 2007
- Jang, H. U.; Blieck, J.; Veshapidze, G.
- Review of Scientific Instruments, Vol. 78, Issue 9
A simple, precise, and low jitter delay/gate generator
journal, July 2003
- Kalisz, J.; Poniecki, A.; Różyc, K.
- Review of Scientific Instruments, Vol. 74, Issue 7
The laser shock station in the dynamic compression sector. I
journal, May 2019
- Wang, Xiaoming; Rigg, Paulo; Sethian, John
- Review of Scientific Instruments, Vol. 90, Issue 5
The Dynamic Compression Sector laser: A 100-J UV laser for dynamic compression research
journal, May 2019
- Broege, D.; Fochs, S.; Brent, G.
- Review of Scientific Instruments, Vol. 90, Issue 5
Single-pulse (100 ps) extended x-ray absorption fine structure capability at the Dynamic Compression Sector
journal, August 2020
- Das, Pinaki; Klug, Jeffrey A.; Sinclair, Nicholas
- Review of Scientific Instruments, Vol. 91, Issue 8
The FPGA based Trigger and Data Acquisition system for the CERN NA62 experiment
journal, January 2014
- Angelucci, B.; Fantechi, R.; Lamanna, G.
- Journal of Instrumentation, Vol. 9, Issue 01
Low-jitter wide-range integrated time interval/delay generator based on combination of period counting and capacitor charging
journal, February 2015
- Klepacki, K.; Pawłowski, M.; Szplet, R.
- Review of Scientific Instruments, Vol. 86, Issue 2
The Florence Trigger-Box (FTB) project: An FPGA-based configurable and scalable trigger system
journal, November 2021
- Ottanelli, P.; Pasquali, G.; Baldesi, L.
- Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 1015
A fully-adjustable picosecond resolution arbitrary timing generator based on multi-stage time interpolation
journal, November 2019
- Zhang, Wen-Zhe; Qin, Xi; Wang, Lin
- Review of Scientific Instruments, Vol. 90, Issue 11
BioCARS: a synchrotron resource for time-resolved X-ray science
journal, May 2011
- Graber, T.; Anderson, S.; Brewer, H.
- Journal of Synchrotron Radiation, Vol. 18, Issue 4
Investigation of FPGA-Based Real-Time Adaptive Digital Pulse Shaping for High-Count-Rate Applications
journal, July 2017
- Saxena, Shefali; Hawari, Ayman I.
- IEEE Transactions on Nuclear Science, Vol. 64, Issue 7
Overview of trigger systems
journal, December 2004
- Lindenstruth, V.; Kisel, I.
- Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 535, Issue 1-2