DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Oxygen-Based Anion Redox for Lithium Batteries

Abstract

The importance of current Li-ion batteries (LIBs) in modern society cannot be overstated. While the energy demands of devices increase, the corresponding enhancements in energy density of battery technologies are highly sought after. Currently, many different battery concepts, such as Li-S and metal-air among many others, have been investigated. However, their practical implementation has mostly been restricted to the prototyping stage. In fact, most of these technologies require rework of existing Li-ion battery manufacturing facilities and will naturally incur resistance to change from industry. For this reason, one specifically attractive technology, anionic redox in transition metal oxides, has gained much attention in the recent years. Its ability to be directly used in already established processes and higher energy density with similar electrolyte formulation make it a key materials research direction for next generation Li-ion batteries. In regular LIBs, the redox active centers are the transition metal cation. In anion redox, both the anion (typically O) and the transition metal cation are utilized as redox centers with enormous implications for increasing energy density. This new material can be highly competitive for replacing the current LIB technologies. However, much is still unknown about its cyding mechanism. Upon activating the O redox couples,more » most cationic and anionic redox active materials will either evolve O2 or undergo irreversible structural degradation with associated severe decreases in electrochemical performance. By understanding the transition from full anion redox to partial cationic and anionic redo; we hope readers can gain a deeper understanding of the topic. This Account will focus mainly on the work that was conducted by our group at Argonne National Laboratory. Herein, the phenomenon of cationic and anionic redox in a lithium-ion battery cathode will first be discussed. Our work in resonant inelastic X-ray scattering to investigate the spectroscopic features of O after delithiation has found potential "fingerprint" signals that could likely be used to identify and confirm reversible O redox if corroborated with other techniques. To follow, we will examine our work on Li-O2 batteries. While our group and the research community have had many significant contributions and improvements to the field of Li-O2 (such as decreasing overpotential and achieving cyclability in air environment), its practical application is still far from realization. Perhaps our most important contribution to this area is the discovery that Ir deposited on reduced graphene oxide can be used to halt the reduction of O2 at the LiO2 oxidation state. This not only significantly decreases the charge overpotential but also presents the important concept of oxidation-state controlled discharge. Subsequently, we will focus on our oxidation state-controlled redox-based charging of oxygen in a pure oxygen redox Li-ion battery. Future implications of this technology will be emphasized.« less

Authors:
 [1]; ORCiD logo [2]; ORCiD logo [2]; ORCiD logo [2]
  1. Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Waterloo, ON (Canada)
  2. Argonne National Lab. (ANL), Argonne, IL (United States)
Publication Date:
Research Org.:
Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office
OSTI Identifier:
1756769
Grant/Contract Number:  
AC02-06CH11357
Resource Type:
Accepted Manuscript
Journal Name:
Accounts of Chemical Research
Additional Journal Information:
Journal Volume: 53; Journal Issue: 8; Journal ID: ISSN 0001-4842
Publisher:
American Chemical Society
Country of Publication:
United States
Language:
English
Subject:
25 ENERGY STORAGE

Citation Formats

Li, Matthew, Bi, Xuanxuan, Amine, Khalil, and Lu, Jun. Oxygen-Based Anion Redox for Lithium Batteries. United States: N. p., 2020. Web. doi:10.1021/acs.accounts.0c00104.
Li, Matthew, Bi, Xuanxuan, Amine, Khalil, & Lu, Jun. Oxygen-Based Anion Redox for Lithium Batteries. United States. https://doi.org/10.1021/acs.accounts.0c00104
Li, Matthew, Bi, Xuanxuan, Amine, Khalil, and Lu, Jun. Tue . "Oxygen-Based Anion Redox for Lithium Batteries". United States. https://doi.org/10.1021/acs.accounts.0c00104. https://www.osti.gov/servlets/purl/1756769.
@article{osti_1756769,
title = {Oxygen-Based Anion Redox for Lithium Batteries},
author = {Li, Matthew and Bi, Xuanxuan and Amine, Khalil and Lu, Jun},
abstractNote = {The importance of current Li-ion batteries (LIBs) in modern society cannot be overstated. While the energy demands of devices increase, the corresponding enhancements in energy density of battery technologies are highly sought after. Currently, many different battery concepts, such as Li-S and metal-air among many others, have been investigated. However, their practical implementation has mostly been restricted to the prototyping stage. In fact, most of these technologies require rework of existing Li-ion battery manufacturing facilities and will naturally incur resistance to change from industry. For this reason, one specifically attractive technology, anionic redox in transition metal oxides, has gained much attention in the recent years. Its ability to be directly used in already established processes and higher energy density with similar electrolyte formulation make it a key materials research direction for next generation Li-ion batteries. In regular LIBs, the redox active centers are the transition metal cation. In anion redox, both the anion (typically O) and the transition metal cation are utilized as redox centers with enormous implications for increasing energy density. This new material can be highly competitive for replacing the current LIB technologies. However, much is still unknown about its cyding mechanism. Upon activating the O redox couples, most cationic and anionic redox active materials will either evolve O2 or undergo irreversible structural degradation with associated severe decreases in electrochemical performance. By understanding the transition from full anion redox to partial cationic and anionic redo; we hope readers can gain a deeper understanding of the topic. This Account will focus mainly on the work that was conducted by our group at Argonne National Laboratory. Herein, the phenomenon of cationic and anionic redox in a lithium-ion battery cathode will first be discussed. Our work in resonant inelastic X-ray scattering to investigate the spectroscopic features of O after delithiation has found potential "fingerprint" signals that could likely be used to identify and confirm reversible O redox if corroborated with other techniques. To follow, we will examine our work on Li-O2 batteries. While our group and the research community have had many significant contributions and improvements to the field of Li-O2 (such as decreasing overpotential and achieving cyclability in air environment), its practical application is still far from realization. Perhaps our most important contribution to this area is the discovery that Ir deposited on reduced graphene oxide can be used to halt the reduction of O2 at the LiO2 oxidation state. This not only significantly decreases the charge overpotential but also presents the important concept of oxidation-state controlled discharge. Subsequently, we will focus on our oxidation state-controlled redox-based charging of oxygen in a pure oxygen redox Li-ion battery. Future implications of this technology will be emphasized.},
doi = {10.1021/acs.accounts.0c00104},
journal = {Accounts of Chemical Research},
number = 8,
volume = 53,
place = {United States},
year = {Tue Jul 07 00:00:00 EDT 2020},
month = {Tue Jul 07 00:00:00 EDT 2020}
}

Works referenced in this record:

30 Years of Lithium-Ion Batteries
journal, June 2018


Batteries and fuel cells for emerging electric vehicle markets
journal, April 2018


Demanding energy from carbon
journal, September 2019


Bamboo‐Like Nitrogen‐Doped Carbon Nanotube Forests as Durable Metal‐Free Catalysts for Self‐Powered Flexible Li–CO 2 Batteries
journal, August 2019

  • Li, Xuelian; Zhou, Jingwen; Zhang, Junxiang
  • Advanced Materials, Vol. 31, Issue 39
  • DOI: 10.1002/adma.201903852

The application of carbon materials in nonaqueous Na‐O 2 batteries
journal, October 2019

  • Lin, Xiaoting; Sun, Qian; Doyle Davis, Kieran
  • Carbon Energy, Vol. 1, Issue 2
  • DOI: 10.1002/cey2.15

ZnS coating of cathode facilitates lean‐electrolyte Li‐S batteries
journal, October 2019

  • Shin, Woochul; Lu, Jun; Ji, Xiulei
  • Carbon Energy, Vol. 1, Issue 2
  • DOI: 10.1002/cey2.10

Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries
journal, June 2017


Electrochemically primed functional redox mediator generator from the decomposition of solid state electrolyte
journal, April 2019


Gas Pickering Emulsion Templated Hollow Carbon for High Rate Performance Lithium Sulfur Batteries
journal, September 2016

  • Li, Matthew; Zhang, Yining; Wang, Xiaolei
  • Advanced Functional Materials, Vol. 26, Issue 46
  • DOI: 10.1002/adfm.201603241

Polar Ultrathin Self-Doping Carbon Nitride Nanosheets with Intrinsic Polysulfide Adsorption for High Performance Lithium-Sulfur Batteries
journal, August 2018


Cycling Li-O2 batteries via LiOH formation and decomposition
journal, October 2015


A lithium–oxygen battery based on lithium superoxide
journal, January 2016

  • Lu, Jun; Jung Lee, Yun; Luo, Xiangyi
  • Nature, Vol. 529, Issue 7586, p. 377-382
  • DOI: 10.1038/nature16484

Stabilizing lithium metal using ionic liquids for long-lived batteries
journal, June 2016

  • Basile, A.; Bhatt, A. I.; O’Mullane, A. P.
  • Nature Communications, Vol. 7, Issue 1
  • DOI: 10.1038/ncomms11794

Self‐Standing Highly Conductive Solid Electrolytes Based on Block Copolymers for Rechargeable All‐Solid‐State Lithium‐Metal Batteries
journal, August 2018

  • Aldalur, Itziar; Martinez‐Ibañez, Maria; Piszcz, Michal
  • Batteries & Supercaps, Vol. 1, Issue 4
  • DOI: 10.1002/batt.201800048

In Operando XRD and TXM Study on the Metastable Structure Change of NaNi 1/3 Fe 1/3 Mn 1/3 O 2 under Electrochemical Sodium-Ion Intercalation
journal, September 2016

  • Xie, Yingying; Wang, Hong; Xu, Guiliang
  • Advanced Energy Materials, Vol. 6, Issue 24
  • DOI: 10.1002/aenm.201601306

Elucidation of the Sodium - Copper Extrusion Mechanism in CuCrS 2 : A High Capacity, Long-Life Anode Material for Sodium-Ion Batteries
journal, August 2018

  • Krengel, Markus; Hansen, Anna-Lena; Hartmann, Felix
  • Batteries & Supercaps, Vol. 1, Issue 5
  • DOI: 10.1002/batt.201800039

Bridging the academic and industrial metrics for next-generation practical batteries
journal, February 2019


Why LiFePO 4 is a safe battery electrode: Coulomb repulsion induced electron-state reshuffling upon lithiation
journal, January 2015

  • Liu, Xiaosong; Wang, Yung Jui; Barbiellini, Bernardo
  • Physical Chemistry Chemical Physics, Vol. 17, Issue 39
  • DOI: 10.1039/C5CP04739K

Direct Experimental Probe of the Ni(II)/Ni(III)/Ni(IV) Redox Evolution in LiNi 0.5 Mn 1.5 O 4 Electrodes
journal, November 2015

  • Qiao, Ruimin; Wray, L. Andrew; Kim, Jung-Hyun
  • The Journal of Physical Chemistry C, Vol. 119, Issue 49
  • DOI: 10.1021/acs.jpcc.5b07479

Elucidating anionic oxygen activity in lithium-rich layered oxides
journal, March 2018


The effect of oxygen vacancy and spinel phase integration on both anionic and cationic redox in Li-rich cathode materials
journal, January 2020

  • Li, Qingyuan; Ning, De; Zhou, Dong
  • Journal of Materials Chemistry A, Vol. 8, Issue 16
  • DOI: 10.1039/D0TA02517H

Resonant X-Ray Emission Spectroscopy of Molecular Oxygen
journal, April 1996


Quantification of Anionic Redox Chemistry in a Prototype Na-Rich Layered Oxide
journal, December 2019

  • Hu, Yue; Liu, Tiefeng; Cheng, Chen
  • ACS Applied Materials & Interfaces, Vol. 12, Issue 3
  • DOI: 10.1021/acsami.9b19204

Reversible Anionic Redox Activities in Conventional LiNi 1/3 Co 1/3 Mn 1/3 O 2 Cathodes
journal, March 2020


Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
journal, December 2015


Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
journal, July 2013

  • Sathiya, M.; Rousse, G.; Ramesha, K.
  • Nature Materials, Vol. 12, Issue 9
  • DOI: 10.1038/nmat3699

Fundamental interplay between anionic/cationic redox governing the kinetics and thermodynamics of lithium-rich cathodes
journal, December 2017


Enabling the high capacity of lithium-rich anti-fluorite lithium iron oxide by simultaneous anionic and cationic redox
journal, December 2017


Oxygen Contribution on Li-Ion Intercalation−Deintercalation in LiCoO 2 Investigated by O K-Edge and Co L-Edge X-ray Absorption Spectroscopy
journal, March 2002

  • Yoon, Won-Sub; Kim, Kwang-Bum; Kim, Min-Gyu
  • The Journal of Physical Chemistry B, Vol. 106, Issue 10
  • DOI: 10.1021/jp013735e

Mechanism of Exact Transition between Cationic and Anionic Redox Activities in Cathode Material Li 2 FeSiO 4
journal, October 2018

  • Zheng, Jiaxin; Teng, Gaofeng; Yang, Jinlong
  • The Journal of Physical Chemistry Letters, Vol. 9, Issue 21
  • DOI: 10.1021/acs.jpclett.8b02725

Anion-redox nanolithia cathodes for Li-ion batteries
journal, July 2016


In Situ Structural and Electrochemical Study of Ni1−xCoxO2 Metastable Oxides Prepared by Soft Chemistry
journal, October 1999

  • Tarascon, J. M.; Vaughan, G.; Chabre, Y.
  • Journal of Solid State Chemistry, Vol. 147, Issue 1
  • DOI: 10.1006/jssc.1999.8465

Superstructure control of first-cycle voltage hysteresis in oxygen-redox cathodes
journal, December 2019


Approaching the limits of cationic and anionic electrochemical activity with the Li-rich layered rocksalt Li3IrO4
journal, December 2017


Understanding the Roles of Anionic Redox and Oxygen Release during Electrochemical Cycling of Lithium-Rich Layered Li 4 FeSbO 6
journal, April 2015

  • McCalla, Eric; Sougrati, Moulay Tahar; Rousse, Gwenaelle
  • Journal of the American Chemical Society, Vol. 137, Issue 14
  • DOI: 10.1021/jacs.5b01424

Metal-Air Batteries with High Energy Density: Li-Air versus Zn-Air
journal, December 2010

  • Lee, Jang-Soo; Tai Kim, Sun; Cao, Ruiguo
  • Advanced Energy Materials, Vol. 1, Issue 1, p. 34-50
  • DOI: 10.1002/aenm.201000010

Aprotic and Aqueous Li–O2 Batteries
journal, April 2014

  • Lu, Jun; Li, Li; Park, Jin-Bum
  • Chemical Reviews, Vol. 114, Issue 11, p. 5611-5640
  • DOI: 10.1021/cr400573b

Selective Growth of a Discontinuous Subnanometer Pd Film on Carbon Defects for Li–O 2 Batteries
journal, October 2019


In Situ Formed Ir 3 Li Nanoparticles as Active Cathode Material in Li–Oxygen Batteries
journal, October 2019

  • Halder, Avik; Ngo, Anh T.; Luo, Xiangyi
  • The Journal of Physical Chemistry A, Vol. 123, Issue 46
  • DOI: 10.1021/acs.jpca.9b06875

Insights into Structural Evolution of Lithium Peroxides with Reduced Charge Overpotential in Li−O 2 System
journal, June 2019

  • Tan, Guoqiang; Chong, Lina; Zhan, Chun
  • Advanced Energy Materials, Vol. 9, Issue 27
  • DOI: 10.1002/aenm.201900662

Lithiation-Induced Non-Noble Metal Nanoparticles for Li–O 2 Batteries
journal, December 2018

  • Guo, Yuanyuan; Dai, Zhengfei; Lu, Jun
  • ACS Applied Materials & Interfaces, Vol. 11, Issue 1
  • DOI: 10.1021/acsami.8b17417

A nanostructured cathode architecture for low charge overpotential in lithium-oxygen batteries
journal, August 2013

  • Lu, Jun; Lei, Yu; Lau, Kah Chun
  • Nature Communications, Vol. 4, Issue 1
  • DOI: 10.1038/ncomms3383

Tuning Li 2 O 2 Formation Routes by Facet Engineering of MnO 2 Cathode Catalysts
journal, July 2019

  • Yao, Wentao; Yuan, Yifei; Tan, Guoqiang
  • Journal of the American Chemical Society, Vol. 141, Issue 32
  • DOI: 10.1021/jacs.9b05992

Effect of the size-selective silver clusters on lithium peroxide morphology in lithium–oxygen batteries
journal, September 2014

  • Lu, Jun; Cheng, Lei; Lau, Kah Chun
  • Nature Communications, Vol. 5, Article No. 4895
  • DOI: 10.1038/ncomms5895

The crystal structure of IrLi, Ir3Li and LiRh3
journal, December 1976


The importance of anode protection towards lithium oxygen batteries
journal, January 2020

  • Bi, Xuanxuan; Amine, Khalil; Lu, Jun
  • Journal of Materials Chemistry A, Vol. 8, Issue 7
  • DOI: 10.1039/C9TA12414D

Atomic and Molecular Layer Deposition for Superior Lithium-Sulfur Batteries: Strategies, Performance, and Mechanisms
journal, May 2018

  • Sun, Qian; Lau, Kah Chun; Geng, Dongsheng
  • Batteries & Supercaps, Vol. 1, Issue 2
  • DOI: 10.1002/batt.201800024

SIM-RIXS: a program to simulate resonant inelastic X-ray scattering
journal, January 2011


A high-energy-density and long-life lithium-ion battery via reversible oxide–peroxide conversion
journal, October 2019


State-of-the-art characterization techniques for advanced lithium-ion batteries
journal, March 2017