CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace

doi:10.1016/j.applthermaleng.2018.01.017

This content will become publicly available on February 9, 2020

Title: CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace

Full Record
Other Related Research

Authors:: Tang, Guangwu; Wu, Bin; Bai, Dengqi; Wang, Yufeng; Bodnar, Rick; Zhou, Chenn

Publication Date:: 2018-03-01

Sponsoring Org.:: USDOE National Nuclear Security Administration (NNSA)

OSTI Identifier:: 1582778

Grant/Contract Number:: NA000741

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Applied Thermal Engineering

Additional Journal Information:: Journal Name: Applied Thermal Engineering Journal Volume: 132 Journal Issue: C; Journal ID: ISSN 1359-4311

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Tang, Guangwu, Wu, Bin, Bai, Dengqi, Wang, Yufeng, Bodnar, Rick, and Zhou, Chenn. CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace.  United Kingdom: N. p., 2018. 
        Web.  doi:10.1016/j.applthermaleng.2018.01.017.

Copy to clipboard


                    Tang, Guangwu, Wu, Bin, Bai, Dengqi, Wang, Yufeng, Bodnar, Rick, & Zhou, Chenn. CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace.  United Kingdom.  doi:10.1016/j.applthermaleng.2018.01.017.

Copy to clipboard


                    Tang, Guangwu, Wu, Bin, Bai, Dengqi, Wang, Yufeng, Bodnar, Rick, and Zhou, Chenn. Thu .  
        "CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace".  United Kingdom.  doi:10.1016/j.applthermaleng.2018.01.017.

Copy to clipboard


                    
@article{osti_1582778,

  title        = {CFD modeling and validation of a dynamic slab heating process in an industrial walking beam reheating furnace},

  author       = {Tang, Guangwu and Wu, Bin and Bai, Dengqi and Wang, Yufeng and Bodnar, Rick and Zhou, Chenn},

  abstractNote = {},

  doi          = {10.1016/j.applthermaleng.2018.01.017},

  journal      = {Applied Thermal Engineering},

  number       = C,

  volume       = 132,

  place        = {United Kingdom},

  year         = {2018},

  month        = {3}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

This content will become publicly available on February 9, 2020

Publisher's Version of Record

DOI: 10.1016/j.applthermaleng.2018.01.017

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Heat transfer in industrial furnaces. Annual report, April 1991-March 1992

Technical Report Ramamurthy, H. ; Ramadhyani, S. ; Sullivan, P.F. ; ...

The thermal system models for indirectly-fired batch and continuous furnaces have been completed by coupling a one-dimensional radiant tube model with the furnace space model. For a given furnace geometry, it is now possible to specify the firing rates in individual radiant tubes and to predict the resulting load temperature profiles and heat transfer to the load while also calculating the exhaust gas temperature from each tube. A two-dimensional model of the processes within the radiant tube is being developed to calculate the rate of fuel burn-up and the convective heat transfer from the combustion products in the tube tomore »« less
Oxidation of low carbon steel in multicomponent gases. Part 2: Reaction mechanisms during reheating

Journal Article Abuluwefa, H.T. ; Guthrie, R.I.L. ; Ajersch, F. - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

Oxidation behavior of low carbon steel during reheating in an industrial walking-beam steel reheat furnace was investigated. It was observed that scaling (oxidation) rates were reduced by reducing the input air/fuel ratio to the furnace, thereby lowering concentrations of free oxygen in the combustion products from about 3 to 1.5 pct. Laboratory experiments involving isothermal and nonisothermal oxidation were carried out in atmospheres consisting of oxygen, carbon dioxide, water vapor, and nitrogen. A general equation for the prediction of weight gains due to oxidation during reheating, using isothermal oxidation rate constants, was developed. The prediction of weight gains from nonisothermalmore »« less
DOI: 10.1007/s11661-997-0256-6
Numerical simulation for the high performance industrial reheating furnace design

Conference Murakami, Hideki ; Saito, Toshiaki ; Hayashi, Junnichi ; ...

The high performance industrial furnace, providing significant energy savings, low pollutant emission and high control ability on heating, has been developing. For designing the process, numerical simulations of a slab reheating furnace, with the advanced combustion system adopting highly preheated air have been performed, using a three-dimensional unsteady mathematical model. An essential feature of the model is the incorporation of the three-dimensional turbulent model (LES) and the Radiative Energy Absorption Distribution (READ) method. Numerical results has been verified with experimental results, velocity data of a water-model and heat flux data of a large unit furnace. The results have been, also,more »« less
NOx Control Options and Integration for US Coal Fired Boilers

Technical Report Mike Bockelie ; Marc Cremer ; Kevin Davis ; ...

This is the Final Report for DOE Cooperative Agreement No: DE-FC26-00NT40753. The goal of the project was to develop cost-effective analysis tools and techniques for demonstrating and evaluating low-NOx control strategies and their possible impact on boiler performance for boilers firing US coals. The Electric Power Research Institute (EPRI) provided co-funding for this program. This project included research on: (1) In furnace NOx control; (2) Impacts of combustion modifications on boiler operation; (3) Selective Catalytic Reduction (SCR) catalyst testing and (4) Ammonia adsorption/removal on fly ash. Important accomplishments were achieved in all aspects of the project. Rich Reagent Injection (RRI),more »« less
DOI: 10.2172/927773

Full Text Available
Annual Report: Carbon Capture Simulation Initiative (CCSI) (30 September 2013)

Technical Report Miller, David C. ; Syamlal, Madhava ; Cottrell, Roger ; ...

The Carbon Capture Simulation Initiative (CCSI) is a partnership among national laboratories, industry and academic institutions that is developing and deploying state-of-the-art computational modeling and simulation tools to accelerate the commercialization of carbon capture technologies from discovery to development, demonstration, and ultimately the widespread deployment to hundreds of power plants. The CCSI Toolset will provide end users in industry with a comprehensive, integrated suite of scientifically validated models, with uncertainty quantification (UQ), optimization, risk analysis and decision making capabilities. The CCSI Toolset incorporates commercial and open-source software currently in use by industry and is also developing new software tools asmore »« less
DOI: 10.2172/1122936

Full Text Available

Similar Records