Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels

doi:10.1016/j.matdes.2017.12.023

Title: Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels

Full Record
Other Related Research

Authors:

; Hodgson, Peter D.; Bikmukhametov, Ilias; Miller, Michael K.; Timokhina, Ilana

Publication Date:: 2018-03-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1582690

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials & Design

Additional Journal Information:: Journal Name: Materials & Design Journal Volume: 141 Journal Issue: C; Journal ID: ISSN 0264-1275

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Wang, Jiangting, Hodgson, Peter D., Bikmukhametov, Ilias, Miller, Michael K., and Timokhina, Ilana. Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels.  United Kingdom: N. p., 2018. 
        Web.  doi:10.1016/j.matdes.2017.12.023.

Copy to clipboard


                    Wang, Jiangting, Hodgson, Peter D., Bikmukhametov, Ilias, Miller, Michael K., & Timokhina, Ilana. Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels.  United Kingdom.  doi:10.1016/j.matdes.2017.12.023.

Copy to clipboard


                    Wang, Jiangting, Hodgson, Peter D., Bikmukhametov, Ilias, Miller, Michael K., and Timokhina, Ilana. Thu .  
        "Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels".  United Kingdom.  doi:10.1016/j.matdes.2017.12.023.

Copy to clipboard


                    
@article{osti_1582690,

  title        = {Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels},

  author       = {Wang, Jiangting and Hodgson, Peter D. and Bikmukhametov, Ilias and Miller, Michael K. and Timokhina, Ilana},

  abstractNote = {},

  doi          = {10.1016/j.matdes.2017.12.023},

  journal      = {Materials & Design},

  number       = C,

  volume       = 141,

  place        = {United Kingdom},

  year         = {2018},

  month        = {3}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
DOI: 10.1016/j.matdes.2017.12.023

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 9 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Effect of microstructure on grain boundary segregation of P in a Cr--Mo--V steel

Journal Article Viswanathan, R ; Joshi, A - Scr. Metall., v. 9, no. 5, pp. 475-478
DOI: 10.1016/0036-9748(75)90335-X
Influence of cooling rate on the precipitation behavior in Ti–Nb–Mo microalloyed steels during continuous cooling and relationship to strength

Journal Article Bu, F. Z. ; Wang, X.M., E-mail: wxm@mater.ustb.edu.cn ; Chen, L. ; ... - Materials Characterization

In this study we elucidate carbide precipitation at varied cooling rates in Ti–Nb–Mo microalloyed steels during continuous cooling. The study suggests that increasing the cooling rate prevents precipitate formation in the ferrite phase during continuous cooling after finish rolling at 850 °C. At a lower cooling rate of 0.5 °C/s, the microhardness of ferrite grains exhibited maxima because of high volume fraction of fine carbides. A high density of nanoscale carbides with similar precipitation characteristics, including interphase precipitates, was observed at cooling rates of 0.5 and 1 °C/s, but the carbides were marginally larger and the spacing between them wasmore »« less
DOI: 10.1016/J.MATCHAR.2015.03.005
Non-equilibrium grain boundary segregation of boron in austenitic stainless steel - IV. Precipitation behaviour and distribution of elements at grain boundaries

Journal Article Karlsson, L ; Norden, H - Acta Metall.; (United States)

The distribution of elements and the precipitation behaviour at grain boundaries have been studied in boron containing AISI 316L and ''Mo-free AISI 316L'' type austenitic stainless steels. A combination of microanalytical techniques was used to study the boundary regions after cooling at 0.29-530/sup 0/C/s from 800, 1075 or 1250/sup 0/C. Tetragonal M/sub 2/B, M/sub 5/B/sub 3/ and M/sub 3/B/sub 2/, all rich in Fe, Cr and Mo, precipitated in the ''high B'' (40 ppm) AISI 316L steel whereas orthorhombic M/sub 2/B, rich in Cr and Fe was found in the ''Mo-free steel'' with 23 ppm B. In the ''high Bmore »« less
DOI: 10.1016/0001-6160(88)90026-0
Effects of deformation (strain) and heat treatment on grain boundary sensitization and precipitation in austenitic stainless steels

Journal Article Murr, L E ; Advani, A ; Shankar, S ; ... - Materials Characterization; (USA)

Sensitization, particularly the degree of sensitization (DOS) in type 316 stainless steel pipe is critically dependent upon the solution anneal of the mill-annealed or commercial material, and is particularly sensitive to los-temperature aging when the starting material is solution annealed between about 1,000{degrees}C and 1,100{degrees}C. It is observed that when the DOS is above about 10 C/cm{sup 2} (quantitative electrochemical photentiokinetic reactivation units in Coulombs/cm{sup 2}), noticeable carbide precipitation occurs in the grain boundaries and increases with increasing DOS. Transmission electron microscopy (TEM) examination of precipitation occurring in type 316 stainless steel pipe grain boundaries has shown them to exhibitmore »« less
DOI: 10.1016/1044-5803(90)90032-F
Influences of interstitial and extrusion temperature on grain boundary segregation, Y-Ti-O nanofeatures, and mechanical properties of ferritic steels

Journal Article Seol, Jae Bok ; Haley, Daniel ; Hoelzer, David T. ; ... - Acta Materialia

Doping with interstitials influences the grain boundary (GB) composition of metallic alloys, enabling changes in elemental GB enrichment, grain size, and mechanical properties or even promoting nanoparticle formation. Yet, little efforts on these doping effects have been made in oxide dispersion-strengthened (ODS) steels. In this paper, by combining advanced microscopy techniques, we studied the impact of interstitial concentration and extrusion temperature on the GB structure-dependent solute segregation, Y-Ti-O nanofeatures, and mechanical properties of ferritic Fe–14Cr (wt%) ODS steels fabricated by ball milling. We found that doping with high carbon and oxygen contents causes the GB to be decorated with themore »« less
Cited by 5
DOI: 10.1016/j.actamat.2018.04.046

Full Text Available

Similar Records