An analysis of key characteristics of the Frank-Read source process in FCC metals
Abstract
A well-known intragranular dislocation source, the Frank-Read (FR) source plays an important role in size-dependent dislocation multiplication in crystalline materials. Despite a number of studies in this topic, a systematic investigation of multiple aspects of the FR source in different materials is lacking. Here, in this paper, we employ large scale quasistatic concurrent atomistic-continuum (CAC) simulations to model an edge dislocation bowing out from an FR source in Cu, Ni, and Al. First, a number of quantities that are important for the FR source process are quantified in the coarse-grained domain. Then, two key characteristics of the FR source, including the critical shear stress and critical dislocation configuration, are investigated. In all crystalline materials, the critical stresses and the aspect ratio of the dislocation half-loop height to the FR source length scale well with respect to the FR source length. In Al, the critical stress calculated by CAC simulations for a given FR source length agrees reasonably well with a continuum model that explicitly includes the dislocation core energy. Nevertheless, the predictions of the isotropic elastic theory do not accurately capture the FR source responses in Cu and Ni, which have a relatively large stacking fault width and elastic anisotropy.more »
- Authors:
-
- Georgia Institute of Technology, Atlanta, GA (United States)
- Iowa State Univ., Ames, IA (United States)
- Univ. of Florida, Gainesville, FL (United States)
- Publication Date:
- Research Org.:
- Univ. of Florida, Gainesville, FL (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES); National Science Foundation (NSF)
- OSTI Identifier:
- 1533999
- Alternate Identifier(s):
- OSTI ID: 1430575
- Grant/Contract Number:
- SC0006539; CMMI-1232878; CMMI-1233113; CMMI-1536925; ACI-1053575
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of the Mechanics and Physics of Solids
- Additional Journal Information:
- Journal Volume: 96; Journal ID: ISSN 0022-5096
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Concurrent atomistic-continuum; Dislocation multiplication; Frank-Read source; FCC metals
Citation Formats
Xu, Shuozhi, Xiong, Liming, Chen, Youping, and McDowell, David L. An analysis of key characteristics of the Frank-Read source process in FCC metals. United States: N. p., 2016.
Web. doi:10.1016/j.jmps.2016.08.002.
Xu, Shuozhi, Xiong, Liming, Chen, Youping, & McDowell, David L. An analysis of key characteristics of the Frank-Read source process in FCC metals. United States. https://doi.org/10.1016/j.jmps.2016.08.002
Xu, Shuozhi, Xiong, Liming, Chen, Youping, and McDowell, David L. Sat .
"An analysis of key characteristics of the Frank-Read source process in FCC metals". United States. https://doi.org/10.1016/j.jmps.2016.08.002. https://www.osti.gov/servlets/purl/1533999.
@article{osti_1533999,
title = {An analysis of key characteristics of the Frank-Read source process in FCC metals},
author = {Xu, Shuozhi and Xiong, Liming and Chen, Youping and McDowell, David L.},
abstractNote = {A well-known intragranular dislocation source, the Frank-Read (FR) source plays an important role in size-dependent dislocation multiplication in crystalline materials. Despite a number of studies in this topic, a systematic investigation of multiple aspects of the FR source in different materials is lacking. Here, in this paper, we employ large scale quasistatic concurrent atomistic-continuum (CAC) simulations to model an edge dislocation bowing out from an FR source in Cu, Ni, and Al. First, a number of quantities that are important for the FR source process are quantified in the coarse-grained domain. Then, two key characteristics of the FR source, including the critical shear stress and critical dislocation configuration, are investigated. In all crystalline materials, the critical stresses and the aspect ratio of the dislocation half-loop height to the FR source length scale well with respect to the FR source length. In Al, the critical stress calculated by CAC simulations for a given FR source length agrees reasonably well with a continuum model that explicitly includes the dislocation core energy. Nevertheless, the predictions of the isotropic elastic theory do not accurately capture the FR source responses in Cu and Ni, which have a relatively large stacking fault width and elastic anisotropy. Our results highlight the significance of directly simulating the FR source activities using fully 3D models and shed light on developing more accurate continuum models.},
doi = {10.1016/j.jmps.2016.08.002},
journal = {Journal of the Mechanics and Physics of Solids},
number = ,
volume = 96,
place = {United States},
year = {Sat Aug 06 00:00:00 EDT 2016},
month = {Sat Aug 06 00:00:00 EDT 2016}
}
Web of Science
Works referenced in this record:
Micro-pillar plasticity: 2.5D mesoscopic simulations
journal, September 2009
- Benzerga, A. Amine
- Journal of the Mechanics and Physics of Solids, Vol. 57, Issue 9
Dynamics of a dislocation bypassing an impenetrable precipitate: The Hirsch mechanism revisited
journal, July 2006
- Hatano, Takahiro
- Physical Review B, Vol. 74, Issue 2
A concurrent scheme for passing dislocations from atomistic to continuum domains
journal, February 2012
- Xiong, Liming; Deng, Qian; Tucker, Garritt
- Acta Materialia, Vol. 60, Issue 3
Atomistic study of drag, surface and inertial effects on edge dislocations in face-centered cubic metals
journal, December 2004
- Bitzek, Erik; Gumbsch, Peter
- Materials Science and Engineering: A, Vol. 387-389
Plasticity size effects in tension and compression of single crystals
journal, December 2005
- Deshpande, V. S.; Needleman, A.; Van der Giessen, E.
- Journal of the Mechanics and Physics of Solids, Vol. 53, Issue 12
Characterization and visualization of the lattice misfit associated with dislocation cores
journal, March 2005
- Hartley, C.; Mishin, Y.
- Acta Materialia, Vol. 53, Issue 5
Coarse-grained atomistic simulation of dislocations
journal, February 2011
- Xiong, Liming; Tucker, Garritt; McDowell, David L.
- Journal of the Mechanics and Physics of Solids, Vol. 59, Issue 2
Dislocation Dissociation Strongly Influences on Frank—Read Source Nucleation and Microplasticy of Materials with Low Stacking Fault Energy
journal, April 2014
- Huang, Min-Sheng; Zhu, Ya-Xin; Li, Zhen-Huan
- Chinese Physics Letters, Vol. 31, Issue 4
An analysis of exhaustion hardening in micron-scale plasticity
journal, July 2008
- Benzerga, A. A.
- International Journal of Plasticity, Vol. 24, Issue 7
Capturing the effects of free surfaces on void strengthening with dislocation dynamics
journal, December 2015
- Crone, Joshua C.; Munday, Lynn B.; Knap, Jaroslaw
- Acta Materialia, Vol. 101
Substructural organization, dislocation plasticity and harmonic generation in cyclically stressed wavy slip metals
journal, March 2004
- Cantrell, John H.
- Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 460, Issue 2043
Interaction of Dislocations with an Applied Stress in Anisotropic Crystals
journal, December 1959
- deWit, G.; Koehler, J. S.
- Physical Review, Vol. 116, Issue 5
A dislocation-dynamics-based derivation of the Frank–Read source characteristics for discrete dislocation plasticity
journal, September 2008
- Shishvan, S. Soleymani; Mohammadi, S.; Rahimian, M.
- Modelling and Simulation in Materials Science and Engineering, Vol. 16, Issue 7
Atomic-scale simulation of screw dislocation/coherent twin boundary interaction in Al, Au, Cu and Ni
journal, February 2011
- Chassagne, M.; Legros, M.; Rodney, D.
- Acta Materialia, Vol. 59, Issue 4
Anisotropic Elastic Interactions of a Periodic Dislocation Array
journal, June 2001
- Cai, Wei; Bulatov, Vasily V.; Chang, Jinpeng
- Physical Review Letters, Vol. 86, Issue 25
Dislocation core parameters
journal, February 2005
- Lothe, J.; Hirth, J. P.
- physica status solidi (b), Vol. 242, Issue 4
Atomistically informed dislocation dynamics in fcc crystals
journal, March 2008
- Martínez, E.; Marian, J.; Arsenlis, A.
- Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 3
XSEDE: Accelerating Scientific Discovery
journal, September 2014
- Towns, John; Cockerill, Timothy; Dahan, Maytal
- Computing in Science & Engineering, Vol. 16, Issue 5
Coarse-grained elastodynamics of fast moving dislocations
journal, February 2016
- Xiong, Liming; Rigelesaiyin, Ji; Chen, Xiang
- Acta Materialia, Vol. 104
Structural stability and lattice defects in copper: Ab initio , tight-binding, and embedded-atom calculations
journal, May 2001
- Mishin, Y.; Mehl, M. J.; Papaconstantopoulos, D. A.
- Physical Review B, Vol. 63, Issue 22
A proof of lothe's theorem
journal, February 1967
- Brown, L. M.
- Philosophical Magazine, Vol. 15, Issue 134
A level set method for dislocation dynamics
journal, October 2003
- Xiang, Yang; Cheng, Li-Tien; Srolovitz, David J.
- Acta Materialia, Vol. 51, Issue 18
The self-stress of dislocations and the shape of extended nodes
journal, September 1964
- Brown, L. M.
- Philosophical Magazine, Vol. 10, Issue 105
Analysis of spurious image forces in atomistic simulations of dislocations
journal, January 2015
- Szajewski, B. A.; Curtin, W. A.
- Modelling and Simulation in Materials Science and Engineering, Vol. 23, Issue 2
Dislocation nucleation mechanisms from fcc/bcc incoherent interfaces
journal, December 2011
- Zhang, R. F.; Wang, J.; Beyerlein, I. J.
- Scripta Materialia, Vol. 65, Issue 11
Reformulation of microscopic balance equations for multiscale materials modeling
journal, April 2009
- Chen, Youping
- The Journal of Chemical Physics, Vol. 130, Issue 13
Dislocation dynamics simulation of Frank-Read sources in anisotropic α-Fe
journal, May 2012
- Fitzgerald, S. P.; Aubry, S.; Dudarev, S. L.
- Modelling and Simulation in Materials Science and Engineering, Vol. 20, Issue 4
Ambiguities in the calculation of dislocation self energies
journal, November 2004
- LeSar, R.
- physica status solidi (b), Vol. 241, Issue 13
Operation of a 3D Frank–Read source in a stress gradient and implications for size-dependent plasticity
journal, March 2013
- Szajewski, B. A.; Chakravarthy, S. S.; Curtin, W. A.
- Acta Materialia, Vol. 61, Issue 5
Effect of core energy on mobility in a continuum dislocation model
journal, March 2011
- Lee, Dong Wook; Kim, Hojin; Strachan, Alejandro
- Physical Review B, Vol. 83, Issue 10
Multiscale modeling of dislocation-precipitate interactions in Fe: From molecular dynamics to discrete dislocations
journal, January 2016
- Lehtinen, Arttu; Granberg, Fredric; Laurson, Lasse
- Physical Review E, Vol. 93, Issue 1
Universal Elastic Anisotropy Index
journal, August 2008
- Ranganathan, Shivakumar I.; Ostoja-Starzewski, Martin
- Physical Review Letters, Vol. 101, Issue 5
A Method for Describing a Flexible Dislocation
journal, January 1967
- Bacon, D. J.
- physica status solidi (b), Vol. 23, Issue 2
Anomalous Dislocation Multiplication in FCC Metals
journal, July 2003
- de Koning, Maurice; Cai, Wei; Bulatov, Vasily V.
- Physical Review Letters, Vol. 91, Issue 2
Void-induced cross slip of screw dislocations in fcc copper
journal, February 2008
- Hatano, Takahiro; Kaneko, Tetsuya; Abe, Yousuke
- Physical Review B, Vol. 77, Issue 6
Frank–Read sources and the yield of anisotropic cubic crystals
journal, March 2010
- Fitzgerald, Steven P.
- Philosophical Magazine Letters, Vol. 90, Issue 3
An atomic-level model for studying the dynamics of edge dislocations in metals
journal, May 2003
- Osetsky, Yu N.; Bacon, D. J.
- Modelling and Simulation in Materials Science and Engineering, Vol. 11, Issue 4
A quasistatic implementation of the concurrent atomistic-continuum method for FCC crystals
journal, September 2015
- Xu, Shuozhi; Che, Rui; Xiong, Liming
- International Journal of Plasticity, Vol. 72
The mechanisms governing the activation of dislocation sources in aluminum at different strain rates
journal, November 2015
- Gurrutxaga-Lerma, B.; Balint, D. S.; Dini, D.
- Journal of the Mechanics and Physics of Solids, Vol. 84
Phase field crystal modeling as a unified atomistic approach to defect dynamics
journal, June 2014
- Berry, Joel; Provatas, Nikolas; Rottler, Jörg
- Physical Review B, Vol. 89, Issue 21
Compact and Dissociated Dislocations in Aluminum: Implications for Deformation
journal, March 2005
- Srinivasan, S. G.; Liao, X. Z.; Baskes, M. I.
- Physical Review Letters, Vol. 94, Issue 12
Atomic-scale study of nucleation of dislocations from fcc–bcc interfaces
journal, April 2012
- Zhang, R. F.; Wang, J.; Beyerlein, I. J.
- Acta Materialia, Vol. 60, Issue 6-7
The bowing of a dislocation segment
journal, May 1967
- Foreman, A. J. E.
- Philosophical Magazine, Vol. 15, Issue 137
Core energy and Peierls stress of a screw dislocation in bcc molybdenum: A periodic-cell tight-binding study
journal, September 2004
- Li, Ju; Wang, Cai-Zhuang; Chang, Jin-Peng
- Physical Review B, Vol. 70, Issue 10
Automated identification and indexing of dislocations in crystal interfaces
journal, October 2012
- Stukowski, Alexander; Bulatov, Vasily V.; Arsenlis, Athanasios
- Modelling and Simulation in Materials Science and Engineering, Vol. 20, Issue 8
Nucleation and growth of dislocation loops in Cu, Al and Si by a concurrent atomistic-continuum method
journal, October 2012
- Xiong, Liming; McDowell, David L.; Chen, Youping
- Scripta Materialia, Vol. 67, Issue 7-8
Structure identification methods for atomistic simulations of crystalline materials
journal, May 2012
- Stukowski, Alexander
- Modelling and Simulation in Materials Science and Engineering, Vol. 20, Issue 4
Polymorphic transitions in single crystals: A new molecular dynamics method
journal, December 1981
- Parrinello, M.; Rahman, A.
- Journal of Applied Physics, Vol. 52, Issue 12
Robust atomistic calculation of dislocation line tension
journal, October 2015
- Szajewski, B. A.; Pavia, F.; Curtin, W. A.
- Modelling and Simulation in Materials Science and Engineering, Vol. 23, Issue 8
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
journal, December 2009
- Stukowski, Alexander
- Modelling and Simulation in Materials Science and Engineering, Vol. 18, Issue 1
Dislocation Multiplication from the Frank–Read Source in Atomic Models
journal, January 2014
- Shimokawa, Tomotsugu; Kitada, Soya
- MATERIALS TRANSACTIONS, Vol. 55, Issue 1
Concurrent atomistic–continuum simulations of dislocation–void interactions in fcc crystals
journal, February 2015
- Xiong, Liming; Xu, Shuozhi; McDowell, David L.
- International Journal of Plasticity, Vol. 65
Discrete dislocation plasticity analysis of the grain size dependence of the flow strength of polycrystals
journal, December 2008
- Balint, D. S.; Deshpande, V. S.; Needleman, A.
- International Journal of Plasticity, Vol. 24, Issue 12
A non-singular continuum theory of dislocations
journal, March 2006
- Cai, W.; Arsenlis, A.; Weinberger, C.
- Journal of the Mechanics and Physics of Solids, Vol. 54, Issue 3
Mesh refinement schemes for the concurrent atomistic-continuum method
journal, July 2016
- Xu, Shuozhi; Xiong, Liming; Deng, Qian
- International Journal of Solids and Structures, Vol. 90
The effect of dislocation self-interaction on the orowan stress
journal, December 1973
- Bacon, D. J.; Kocks, U. F.; Scattergood, R. O.
- Philosophical Magazine, Vol. 28, Issue 6
The strengthening effect of voids
journal, August 1982
- Scattergood, R. O.; Bacon, D. J.
- Acta Metallurgica, Vol. 30, Issue 8
Interatomic potentials for monoatomic metals from experimental data and ab initio calculations
journal, February 1999
- Mishin, Y.; Farkas, D.; Mehl, M. J.
- Physical Review B, Vol. 59, Issue 5
Multiplication Processes for Slow Moving Dislocations
journal, August 1950
- Frank, F. C.; Read, W. T.
- Physical Review, Vol. 79, Issue 4
Edge dislocations bowing out from a row of collinear obstacles in Al
journal, October 2016
- Xu, Shuozhi; Xiong, Liming; Chen, Youping
- Scripta Materialia, Vol. 123
Sequential slip transfer of mixed-character dislocations across Σ3 coherent twin boundary in FCC metals: a concurrent atomistic-continuum study
journal, January 2016
- Xu, Shuozhi; Xiong, Liming; Chen, Youping
- npj Computational Materials, Vol. 2, Issue 1
Atomistic simulations for the evolution of a U-shaped dislocation in fcc Al
journal, October 2006
- Li, X. Y.; Yang, W.
- Physical Review B, Vol. 74, Issue 14
Configurational force on a lattice dislocation and the Peierls stress
journal, September 2006
- Lubarda, V. A.; Markenscoff, X.
- Archive of Applied Mechanics, Vol. 77, Issue 2-3
Methods to compute dislocation line tension energy and force in anisotropic elasticity
journal, November 2013
- Aubry, S.; Fitzgerald, S. P.; Arsenlis, A.
- Modelling and Simulation in Materials Science and Engineering, Vol. 22, Issue 1
Parametric dislocation dynamics: A thermodynamics-based approach to investigations of mesoscopic plastic deformation
journal, January 2000
- Ghoniem, N. M.; Tong, S. -H.; Sun, L. Z.
- Physical Review B, Vol. 61, Issue 2
Molecular dynamics investigation of dislocation pinning by a nanovoid in copper
journal, September 2005
- Hatano, Takahiro; Matsui, Hideki
- Physical Review B, Vol. 72, Issue 9
On precipitate induced hardening in crystal plasticity: theory
journal, March 2004
- Han, Chung-Souk; Wagoner, R. H.; Barlat, Frédéric
- International Journal of Plasticity, Vol. 20, Issue 3