Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing
Abstract
In this paper, a metallic hybrid structure, consisting of an Inconel-718 matrix and a Co-Cr internal structure, was successfully manufactured using laser direct energy deposition process. Characterizations were performed using energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), neutron-computed tomography (nCT), and electron back-scatter diffraction (EBSD) to verify the interfaces between Co-rich and Ni-rich phases. nCT revealed the internal structures to be continuous without cracking or significant intermixing due to inter-diffusion of Co and Ni (i.e., dissolved boundaries between the two structures). Minor porosity was detected. EBSD confirmed a good bond at the granular level. No precipitate phases were detected with XRD. Finally, EDS revealed dilution/intermixing between the Co and Ni interfaces presumably due to melt-pool overlay between the matrix and the internal structures.
- Authors:
-
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Electrical and Electronics Systems Research Division
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division
- Univ. of Tennessee, Knoxville, TN (United States). Dept. of Materials Science and Engineering. Dept. of Mechanical, Aerospace and Biomedical Engineering; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy & Transportation Science Division
- Publication Date:
- Research Org.:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Advanced Manufacturing Office; USDOE Office of Science (SC), Basic Energy Sciences (BES); ORNL Laboratory Directed Research and Development (LDRD) Program
- OSTI Identifier:
- 1462837
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Additional Journal Information:
- Journal Volume: 49; Journal Issue: 10; Journal ID: ISSN 1073-5623
- Publisher:
- ASM International
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Cakmak, Ercan, Sridharan, Niyanth, Venkatakrishnan, Singanallur V., Bilheux, Hassina Z., Santodonato, Louis J., Shyam, Amit, and Babu, Sudarsanam S. Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing. United States: N. p., 2018.
Web. doi:10.1007/s11661-018-4741-x.
Cakmak, Ercan, Sridharan, Niyanth, Venkatakrishnan, Singanallur V., Bilheux, Hassina Z., Santodonato, Louis J., Shyam, Amit, & Babu, Sudarsanam S. Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing. United States. https://doi.org/10.1007/s11661-018-4741-x
Cakmak, Ercan, Sridharan, Niyanth, Venkatakrishnan, Singanallur V., Bilheux, Hassina Z., Santodonato, Louis J., Shyam, Amit, and Babu, Sudarsanam S. Wed .
"Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing". United States. https://doi.org/10.1007/s11661-018-4741-x. https://www.osti.gov/servlets/purl/1462837.
@article{osti_1462837,
title = {Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing},
author = {Cakmak, Ercan and Sridharan, Niyanth and Venkatakrishnan, Singanallur V. and Bilheux, Hassina Z. and Santodonato, Louis J. and Shyam, Amit and Babu, Sudarsanam S.},
abstractNote = {In this paper, a metallic hybrid structure, consisting of an Inconel-718 matrix and a Co-Cr internal structure, was successfully manufactured using laser direct energy deposition process. Characterizations were performed using energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), neutron-computed tomography (nCT), and electron back-scatter diffraction (EBSD) to verify the interfaces between Co-rich and Ni-rich phases. nCT revealed the internal structures to be continuous without cracking or significant intermixing due to inter-diffusion of Co and Ni (i.e., dissolved boundaries between the two structures). Minor porosity was detected. EBSD confirmed a good bond at the granular level. No precipitate phases were detected with XRD. Finally, EDS revealed dilution/intermixing between the Co and Ni interfaces presumably due to melt-pool overlay between the matrix and the internal structures.},
doi = {10.1007/s11661-018-4741-x},
journal = {Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science},
number = 10,
volume = 49,
place = {United States},
year = {Wed Jul 11 00:00:00 EDT 2018},
month = {Wed Jul 11 00:00:00 EDT 2018}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 8 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting
journal, April 2016
- Cakmak, Ercan; Kirka, Michael M.; Watkins, Thomas R.
- Acta Materialia, Vol. 108
Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms
journal, August 2017
- Pawlowski, Alexander E.; Cordero, Zachary C.; French, Matthew R.
- Materials & Design, Vol. 127
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
journal, April 2016
- Carroll, Beth E.; Otis, Richard A.; Borgonia, John Paul
- Acta Materialia, Vol. 108
Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation
journal, March 2002
- Wang, X. C.; Laoui, T.; Bonse, J.
- The International Journal of Advanced Manufacturing Technology, Vol. 19, Issue 5
The CG-1D Neutron Imaging Beamline at the Oak Ridge National Laboratory High Flux Isotope Reactor
journal, January 2015
- Santodonato, Lou; Bilheux, Hassina; Bailey, Barton
- Physics Procedia, Vol. 69
A Model Based Iterative Reconstruction Algorithm For High Angle Annular Dark Field-Scanning Transmission Electron Microscope (HAADF-STEM) Tomography
journal, November 2013
- Venkatakrishnan, S. V.; Drummy, L. F.; Jackson, M. A.
- IEEE Transactions on Image Processing, Vol. 22, Issue 11
Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys
journal, July 2003
- Collins, P. C.; Banerjee, R.; Banerjee, S.
- Materials Science and Engineering: A, Vol. 352, Issue 1-2
Laser Deposition of In Situ Ti – TiB Composites
journal, November 2002
- Banerjee, R.; Collins, P. C.; Fraser, H. L.
- Advanced Engineering Materials, Vol. 4, Issue 11
The CG1 instrument development test station at the high flux isotope reactor
journal, April 2011
- Crow, Lowell; Robertson, Lee; Bilheux, Hassina
- Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 634, Issue 1
Microstructural characterization and wear behavior of (Fe,Ni)–TiC MMC prepared by DMLS
journal, September 2006
- Gåård, A.; Krakhmalev, P.; Bergström, J.
- Journal of Alloys and Compounds, Vol. 421, Issue 1-2
Fabrication of WC–Co cermets by laser engineered net shaping
journal, October 2008
- Xiong, Yuhong; Smugeresky, John E.; Ajdelsztajn, Leonardo
- Materials Science and Engineering: A, Vol. 493, Issue 1-2
Direct laser deposition of alloys from elemental powder blends
journal, November 2001
- Schwendner, Katrin I.; Banerjee, Rajarshi; Collins, Peter C.
- Scripta Materialia, Vol. 45, Issue 10
Hybrids to fill holes in material property space
journal, September 2005
- Ashby, M. F.
- Philosophical Magazine, Vol. 85, Issue 26-27, p. 3235-3257
Fast Model-Based X-Ray CT Reconstruction Using Spatially Nonhomogeneous ICD Optimization
journal, January 2011
- Yu, Zhou; Thibault, Jean-Baptiste; Bouman, Charles A.
- IEEE Transactions on Image Processing, Vol. 20, Issue 1
Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance
journal, February 2011
- Gu, Dongdong; Hagedorn, Yves-Christian; Meiners, Wilhelm
- Surface and Coatings Technology, Vol. 205, Issue 10
Fabrication and creep properties of superalloy-zirconia composites
journal, November 2003
- Oruganti, R. K.; Ghosh, A. K.
- Metallurgical and Materials Transactions A, Vol. 34, Issue 11
Effect of SiC particles on the laser sintering of Al–7Si–0.3Mg alloy
journal, July 2008
- Simchi, A.; Godlinski, D.
- Scripta Materialia, Vol. 59, Issue 2
Nanoscale TiB precipitates in laser deposited Ti-matrix composites
journal, December 2005
- Banerjee, R.; Genç, A.; Hill, D.
- Scripta Materialia, Vol. 53, Issue 12
A method for the design and fabrication of heterogeneous objects
journal, August 2003
- Shin, Ki-Hoon; Natu, Harshad; Dutta, Debasish
- Materials & Design, Vol. 24, Issue 5
Comparison of image quality in computed laminography and tomography
journal, January 2012
- Xu, Feng; Helfen, Lukas; Baumbach, Tilo
- Optics Express, Vol. 20, Issue 2
Coupling electron beam melting and spark plasma sintering: A new processing route for achieving titanium architectured microstructures
journal, September 2016
- Martin, Guilhem; Fabrègue, Damien; Mercier, Florian
- Scripta Materialia, Vol. 122
Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen
journal, November 2015
- Cakmak, Ercan; Watkins, Thomas R.; Bunn, Jeffrey R.
- Metallurgical and Materials Transactions A, Vol. 47, Issue 2
The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
journal, January 2010
- Zheng, Baolong; Topping, Troy; Smugeresky, John E.
- Metallurgical and Materials Transactions A, Vol. 41, Issue 3
Efficient Volume Reconstruction for Parallel-Beam Computed Laminography by Filtered Backprojection on Multi-Core Clusters
journal, December 2013
- Myagotin, Anton; Voropaev, Alexey; Helfen, Lukas
- IEEE Transactions on Image Processing, Vol. 22, Issue 12
Works referencing / citing this record:
Advances in additive manufacturing of metal-based functionally graded materials
journal, January 2020
- Reichardt, Ashley; Shapiro, Andrew A.; Otis, Richard
- International Materials Reviews
An interactive web-based tool to guide the preparation of neutron imaging experiments at oak ridge national laboratory
journal, October 2019
- Zhang, Yuxuan; Bilheux, Jean-C; Bilheux, Hassina Z.
- Journal of Physics Communications, Vol. 3, Issue 10