Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry

Chadha, Tandeep S.; Dutta, Prasit Kumar; Raliya, Ramesh; Mitra, Sagar; Biswas, Pratim

doi:10.1039/C8SE00082D

Title: Sustainable one step process for making carbon-free TiO ₂ anodes and sodium-ion battery electrochemistry

Abstract

The ultra durable monolithic dendritic anatase TiO ₂ provides a mechanistic inner-view via a rotational moiré pattern, resulting in 99.55% coulombic efficiency with only 41 mV polarization loss at the 1000 ^th cycle, while retaining the columnar morphology.

Authors:

^[1];

^[2];

^[1];

^[2];

^[1]

Aerosol and Air Quality Research Laboratory, Department of Energy, Environmental and Chemical Engineering, Washington University in St. Louis, St. Louis, USA
Electrochemical Energy Laboratory, Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India

Publication Date:: Mon Jan 01 00:00:00 EST 2018

Sponsoring Org.:: USDOE

OSTI Identifier:: 1438088

Grant/Contract Number:: DE AC36-08G028308

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Sustainable Energy & Fuels

Additional Journal Information:: Journal Name: Sustainable Energy & Fuels Journal Volume: 2 Journal Issue: 7; Journal ID: ISSN 2398-4902

Publisher:: Royal Society of Chemistry (RSC)

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Chadha, Tandeep S., Dutta, Prasit Kumar, Raliya, Ramesh, Mitra, Sagar, and Biswas, Pratim. Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry.  United Kingdom: N. p., 2018. 
Web.  doi:10.1039/C8SE00082D.

Copy to clipboard


                    Chadha, Tandeep S., Dutta, Prasit Kumar, Raliya, Ramesh, Mitra, Sagar, & Biswas, Pratim. Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry.  United Kingdom.  https://doi.org/10.1039/C8SE00082D

Copy to clipboard


                    Chadha, Tandeep S., Dutta, Prasit Kumar, Raliya, Ramesh, Mitra, Sagar, and Biswas, Pratim. Mon .  
"Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry".  United Kingdom.  https://doi.org/10.1039/C8SE00082D.

Copy to clipboard


                    
@article{osti_1438088,

  title        = {Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry},

  author       = {Chadha, Tandeep S. and Dutta, Prasit Kumar and Raliya, Ramesh and Mitra, Sagar and Biswas, Pratim},

  abstractNote = {The ultra durable monolithic dendritic anatase TiO 2 provides a mechanistic inner-view via a rotational moiré pattern, resulting in 99.55% coulombic efficiency with only 41 mV polarization loss at the 1000 th cycle, while retaining the columnar morphology.},

  doi          = {10.1039/C8SE00082D},

  journal      = {Sustainable Energy & Fuels},

  number       = 7,

  volume       = 2,

  place        = {United Kingdom},

  year         = {Mon Jan 01 00:00:00 EST 2018},

  month        = {Mon Jan 01 00:00:00 EST 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1039/C8SE00082D

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 3 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Graphene-Rich Wrapped Petal-Like Rutile TiO ₂ tuned by Carbon Dots for High-Performance Sodium Storage
journal, August 2016

Zhang, Yan; Foster, Christopher W.; Banks, Craig E.
Advanced Materials, Vol. 28, Issue 42
DOI: 10.1002/adma.201601621

High rate capabilities Fe₃O₄-based Cu nano-architectured electrodes for lithium-ion battery applications
journal, June 2006

Taberna, P. L.; Mitra, S.; Poizot, P.
Nature Materials, Vol. 5, Issue 7, p. 567-573
DOI: 10.1038/nmat1672

Amorphous TiO ₂ Nanotube Anode for Rechargeable Sodium Ion Batteries
journal, September 2011

Xiong, Hui; Slater, Michael D.; Balasubramanian, Mahalingam
The Journal of Physical Chemistry Letters, Vol. 2, Issue 20
DOI: 10.1021/jz2012066

Model based prediction of nanostructured thin film morphology in an aerosol chemical vapor deposition process
journal, February 2017

Chadha, Tandeep S.; Yang, Mengmeng; Haddad, Kelsey
Chemical Engineering Journal, Vol. 310
DOI: 10.1016/j.cej.2016.10.105

Self-Assembled TiO ₂ –Graphene Hybrid Nanostructures for Enhanced Li-Ion Insertion
journal, March 2009

Wang, Donghai; Choi, Daiwon; Li, Juan
ACS Nano, Vol. 3, Issue 4, p. 907-914
DOI: 10.1021/nn900150y

Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries
journal, January 2014

Kim, Ki-Tae; Ali, Ghulam; Chung, Kyung Yoon
Nano Letters, Vol. 14, Issue 2
DOI: 10.1021/nl402747x

Prussian Blue@C Composite as an Ultrahigh-Rate and Long-Life Sodium-Ion Battery Cathode
journal, May 2016

Jiang, Yinzhu; Yu, Shenglan; Wang, Baoqi
Advanced Functional Materials, Vol. 26, Issue 29
DOI: 10.1002/adfm.201600747

One-Dimensional, Additive-Free, Single-Crystal TiO ₂ Nanostructured Anodes Synthesized by a Single-Step Aerosol Process for High-Rate Lithium-Ion Batteries
journal, September 2014

Chadha, Tandeep S.; Tripathi, Alok M.; Mitra, Sagar
Energy Technology, Vol. 2, Issue 11
DOI: 10.1002/ente.201402054

Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries
journal, January 2013

Huang, J. P.; Yuan, D. D.; Zhang, H. Z.
RSC Advances, Vol. 3, Issue 31
DOI: 10.1039/c3ra42413h

High-performance lithium battery anodes using silicon nanowires
journal, December 2007

Chan, Candace K.; Peng, Hailin; Liu, Gao
Nature Nanotechnology, Vol. 3, Issue 1, p. 31-35
DOI: 10.1038/nnano.2007.411

Growth of single crystal, oriented SnO ₂ nanocolumn arrays by aerosol chemical vapour deposition
journal, January 2016

Haddad, K.; Abokifa, A.; Kavadiya, S.
CrystEngComm, Vol. 18, Issue 39
DOI: 10.1039/C6CE01443G

Room-temperature sodium-ion batteries: Improving the rate capability of carbon anode materials by templating strategies
journal, January 2011

Wenzel, Sebastian; Hara, Takeshi; Janek, Jürgen
Energy & Environmental Science, Vol. 4, Issue 9
DOI: 10.1039/c1ee01744f

Pseudocapacitive Sodium Storage in Mesoporous Single-Crystal-like TiO ₂ –Graphene Nanocomposite Enables High-Performance Sodium-Ion Capacitors
journal, February 2017

Le, Zaiyuan; Liu, Fang; Nie, Ping
ACS Nano, Vol. 11, Issue 3
DOI: 10.1021/acsnano.6b08332

Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
journal, January 2012

Palomares, Verónica; Serras, Paula; Villaluenga, Irune
Energy & Environmental Science, Vol. 5, Issue 3
DOI: 10.1039/c2ee02781j

Layer-by-Layer Na ₃ V ₂ (PO ₄ ) ₃ Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong-Life Sodium-Ion Battery Cathode
journal, May 2016

Xu, Yanan; Wei, Qiulong; Xu, Chang
Advanced Energy Materials, Vol. 6, Issue 14
DOI: 10.1002/aenm.201600389

High energy density lithium cells
journal, February 1976

Besenhard, J. O.; Eichinger, G.
Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, Vol. 68, Issue 1
DOI: 10.1016/S0022-0728(76)80298-7

Unfolding the Mechanism of Sodium Insertion in Anatase TiO ₂ Nanoparticles
journal, August 2014

Wu, Liming; Bresser, Dominic; Buchholz, Daniel
Advanced Energy Materials, Vol. 5, Issue 2
DOI: 10.1002/aenm.201401142

Cycle Life of Commercial Lithium-Ion Batteries with Lithium Titanium Oxide Anodes in Electric Vehicles
journal, July 2014

Han, Xuebing; Ouyang, Minggao; Lu, Languang
Energies, Vol. 7, Issue 8
DOI: 10.3390/en7084895

Metal-Organic Framework-Derived Materials for Sodium Energy Storage
journal, December 2017

Zou, Guoqiang; Hou, Hongshuai; Ge, Peng
Small, Vol. 14, Issue 3
DOI: 10.1002/smll.201702648

Sodium-Ion Batteries
journal, May 2012

Slater, Michael D.; Kim, Donghan; Lee, Eungje
Advanced Functional Materials, Vol. 23, Issue 8, p. 947-958
DOI: 10.1002/adfm.201200691

Sodium-ion batteries: present and future
journal, January 2017

Hwang, Jang-Yeon; Myung, Seung-Taek; Sun, Yang-Kook
Chemical Society Reviews, Vol. 46, Issue 12
DOI: 10.1039/C6CS00776G

Long-Cycle-Life Na-Ion Anodes Based on Amorphous Titania Nanotubes—Interfaces and Diffusion
journal, November 2015

Prutsch, Denise; Wilkening, Martin; Hanzu, Ilie
ACS Applied Materials & Interfaces, Vol. 7, Issue 46
DOI: 10.1021/acsami.5b07508

In Situ X-Ray Diffraction of Lithium Intercalation in Nanostructured and Thin Film Anatase TiO[sub 2]
journal, January 1999

van de Krol, Roel
Journal of The Electrochemical Society, Vol. 146, Issue 9
DOI: 10.1149/1.1392447

Tin-Nanoparticles Encapsulated in Elastic Hollow Carbon Spheres for High-Performance Anode Material in Lithium-Ion Batteries
journal, March 2008

Zhang, Wei-Ming; Hu, Jin-Song; Guo, Yu-Guo
Advanced Materials, Vol. 20, Issue 6
DOI: 10.1002/adma.200701364

Efficient sodium storage: Experimental study of anode with additive-free ether-based electrolyte system
journal, May 2017

Dutta, Prasit Kumar; Mitra, Sagar
Journal of Power Sources, Vol. 349
DOI: 10.1016/j.jpowsour.2017.03.031

Similar Records in DOE PAGES and OSTI.GOV collections:

Hydrogenated TiO ₂ Carbon Support for PtRu Anode Catalyst in High‐Performance Anion‐Exchange Membrane Fuel Cells

Journal Article Douglin, John C. ; Sekar, Archana ; Singh, Ramesh K. ; ... - Small

Abstract The availability of durable, high‐performance electrocatalysts for the hydrogen oxidation reaction (HOR) is currently a constraint for anion‐exchange membrane fuel cells (AEMFCs). Herein, a rapid microwave‐assisted synthesis method is used to develop a core–shell catalyst support based on a hydrogenated TiO ₂ /carbon for PtRu nanoparticles (NPs). The hydrogenated TiO ₂ provides a strong metal‐support interaction with the PtRu NPs, which improves the catalyst's oxophilicity and HOR activity compared to commercial PtRu/C and enables greater size control of the catalyst NPs. The as‐synthesized PtRu/TiO ₂ /C‐400 electrocatalyst exhibits respectable performance in an AEMFC operated at 80 °C, yielding the highestmore »« less
https://doi.org/10.1002/smll.202307497
Single-step One-pot Synthesis of TiO₂ Nanosheets Doped with Sulfur on Reduced Graphene Oxide with Enhanced Photocatalytic Activity

Journal Article Wang, Weilin ; Wang, Zhaofeng ; Liu, Jingjing ; ... - Scientific Reports

A hybrid photocatalyst based on anatase TiO₂ was designed by doping TiO₂ with sulfur and incorporating reduced graphene oxide (TiO₂-S/rGO hybrid), with an aim to narrow the band gap to potentially make use of visible light and decrease the recombination of excitons, respectively. This TiO₂-S/rGO hybrid was successfully synthesized using a one-pot hydrothermal method via single-step reaction. The structure and morphology of the TiO₂-S/rGO hybrid catalyst was carefully characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Its photocatalytic reactivity was evaluated by the degradation of methyl blue. The results showedmore »« less
Cited by 40
https://doi.org/10.1038/srep46610

Full Text Available
A one-step solvothermal route for the synthesis of nanocrystalline anatase TiO{sub 2} doped with lanthanide ions

Journal Article Falcomer, Daniele ; Daldosso, Matteo ; Cannas, Carla ; ... - Journal of Solid State Chemistry

A one-step solvothermal synthesis is proposed for the preparation of nanocrystalline single-phase TiO{sub 2} in the anatase form doped with lanthanide ions Eu{sup 3+}, Er{sup 3+} and Sm{sup 3+}. The structural properties of these products have been investigated by using X-ray powder diffraction, electron microscopy and Raman spectroscopy. Furthermore, the laser-excited luminescence spectra of the samples have been measured and analyzed. Following this route, the doping process turns out to be highly favorite and the resulting materials show an efficient luminescence in the visible region. -- Graphical abstract: HRTEM image of Eu{sup 3+} doped anatase TiO{sub 2} nanocrystalline powders preparedmore » by a solvothermal technique.« less
https://doi.org/10.1016/j.jssc.2006.04.043
One-step synthesis of Fe–N–S-tri-doped TiO{sub 2} catalyst and its enhanced visible light photocatalytic activity

Journal Article Cheng, Xiuwen ; Key Laboratory of Chemical Engineering Process and Technology for High-efficiency Conversion, College of Heilongjiang Province, Harbin 150080 ; State Key Laboratory of Urban Water Resources and Environment ; ... - Materials Research Bulletin

Graphical abstract: FeNS-TiO{sub 2} exhibits stronger SPS response than that of pure TiO{sub 2}, indicating that the FeNS-TiO{sub 2} should have a higher separation rates of photoinduced charge carriers. Further, for the sample FeNS-TiO{sub 2} a broad shoulder SPS response can be seen at the wavelength range from 390 to 550 nm, suggesting that the light absorption in visible region of FeNS-TiO{sub 2} was greatly improved, which is beneficial to the enhancement of photocatalytic activity. Display Omitted Highlights: ► FeNS-TiO{sub 2} catalyst has been synthesized in the presence of ammonium ferrous sulfate. ► The light absorption edge of FeNS-TiO{sub 2}more »« less
https://doi.org/10.1016/J.MATERRESBULL.2012.05.030
One-pot template-free preparation of mesoporous TiO{sub 2} hollow spheres and their photocatalytic activity

Journal Article Kang, Shizhao ; Yin, Dieer ; Li, Xiangqing ; ... - Materials Research Bulletin

Highlights: ► Mesoporous TiO{sub 2} hollow spheres were prepared in a one-pot process. ► The process does not involve any templates and surfactants. ► The TiO{sub 2} hollow spheres display high photocatalytic activity. -- Abstract: Mesoporous TiO{sub 2} hollow spheres were prepared in a solvothermal process, which did not involve any templates and surfactants. Meanwhile, the photocatalytic activity of TiO{sub 2} hollow spheres was studied using methyl orange as a probe. The results indicate that the anatase TiO{sub 2} hollow spheres with mesoporous walls and high specific surface area (141 m{sup 2} g{sup −1}) can be obtained using this simplemore »« less
https://doi.org/10.1016/J.MATERRESBULL.2012.08.046

Similar Records

Title: Sustainable one step process for making carbon-free TiO 2 anodes and sodium-ion battery electrochemistry

Abstract

Citation Formats

Graphene-Rich Wrapped Petal-Like Rutile TiO 2 tuned by Carbon Dots for High-Performance Sodium Storage journal, August 2016

High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications journal, June 2006

Amorphous TiO 2 Nanotube Anode for Rechargeable Sodium Ion Batteries journal, September 2011

Model based prediction of nanostructured thin film morphology in an aerosol chemical vapor deposition process journal, February 2017

Self-Assembled TiO 2 –Graphene Hybrid Nanostructures for Enhanced Li-Ion Insertion journal, March 2009

Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries journal, January 2014

Prussian Blue@C Composite as an Ultrahigh-Rate and Long-Life Sodium-Ion Battery Cathode journal, May 2016

One-Dimensional, Additive-Free, Single-Crystal TiO 2 Nanostructured Anodes Synthesized by a Single-Step Aerosol Process for High-Rate Lithium-Ion Batteries journal, September 2014

Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries journal, January 2013

High-performance lithium battery anodes using silicon nanowires journal, December 2007

Growth of single crystal, oriented SnO 2 nanocolumn arrays by aerosol chemical vapour deposition journal, January 2016

Room-temperature sodium-ion batteries: Improving the rate capability of carbon anode materials by templating strategies journal, January 2011

Pseudocapacitive Sodium Storage in Mesoporous Single-Crystal-like TiO 2 –Graphene Nanocomposite Enables High-Performance Sodium-Ion Capacitors journal, February 2017

Na-ion batteries, recent advances and present challenges to become low cost energy storage systems journal, January 2012

Layer-by-Layer Na 3 V 2 (PO 4 ) 3 Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong-Life Sodium-Ion Battery Cathode journal, May 2016

High energy density lithium cells journal, February 1976

Unfolding the Mechanism of Sodium Insertion in Anatase TiO 2 Nanoparticles journal, August 2014

Cycle Life of Commercial Lithium-Ion Batteries with Lithium Titanium Oxide Anodes in Electric Vehicles journal, July 2014

Metal-Organic Framework-Derived Materials for Sodium Energy Storage journal, December 2017

Sodium-Ion Batteries journal, May 2012

Sodium-ion batteries: present and future journal, January 2017

Long-Cycle-Life Na-Ion Anodes Based on Amorphous Titania Nanotubes—Interfaces and Diffusion journal, November 2015

In Situ X-Ray Diffraction of Lithium Intercalation in Nanostructured and Thin Film Anatase TiO[sub 2] journal, January 1999

Tin-Nanoparticles Encapsulated in Elastic Hollow Carbon Spheres for High-Performance Anode Material in Lithium-Ion Batteries journal, March 2008

Efficient sodium storage: Experimental study of anode with additive-free ether-based electrolyte system journal, May 2017

Title: Sustainable one step process for making carbon-free TiO ₂ anodes and sodium-ion battery electrochemistry

Graphene-Rich Wrapped Petal-Like Rutile TiO ₂ tuned by Carbon Dots for High-Performance Sodium Storage
journal, August 2016

High rate capabilities Fe₃O₄-based Cu nano-architectured electrodes for lithium-ion battery applications
journal, June 2006

Amorphous TiO ₂ Nanotube Anode for Rechargeable Sodium Ion Batteries
journal, September 2011

Model based prediction of nanostructured thin film morphology in an aerosol chemical vapor deposition process
journal, February 2017

Self-Assembled TiO ₂ –Graphene Hybrid Nanostructures for Enhanced Li-Ion Insertion
journal, March 2009

Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries
journal, January 2014

Prussian Blue@C Composite as an Ultrahigh-Rate and Long-Life Sodium-Ion Battery Cathode
journal, May 2016

One-Dimensional, Additive-Free, Single-Crystal TiO ₂ Nanostructured Anodes Synthesized by a Single-Step Aerosol Process for High-Rate Lithium-Ion Batteries
journal, September 2014

Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries
journal, January 2013

High-performance lithium battery anodes using silicon nanowires
journal, December 2007

Growth of single crystal, oriented SnO ₂ nanocolumn arrays by aerosol chemical vapour deposition
journal, January 2016

Room-temperature sodium-ion batteries: Improving the rate capability of carbon anode materials by templating strategies
journal, January 2011

Pseudocapacitive Sodium Storage in Mesoporous Single-Crystal-like TiO ₂ –Graphene Nanocomposite Enables High-Performance Sodium-Ion Capacitors
journal, February 2017

Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
journal, January 2012

Layer-by-Layer Na ₃ V ₂ (PO ₄ ) ₃ Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong-Life Sodium-Ion Battery Cathode
journal, May 2016

High energy density lithium cells
journal, February 1976

Unfolding the Mechanism of Sodium Insertion in Anatase TiO ₂ Nanoparticles
journal, August 2014

Cycle Life of Commercial Lithium-Ion Batteries with Lithium Titanium Oxide Anodes in Electric Vehicles
journal, July 2014

Metal-Organic Framework-Derived Materials for Sodium Energy Storage
journal, December 2017

Sodium-Ion Batteries
journal, May 2012

Sodium-ion batteries: present and future
journal, January 2017

Long-Cycle-Life Na-Ion Anodes Based on Amorphous Titania Nanotubes—Interfaces and Diffusion
journal, November 2015

In Situ X-Ray Diffraction of Lithium Intercalation in Nanostructured and Thin Film Anatase TiO[sub 2]
journal, January 1999

Tin-Nanoparticles Encapsulated in Elastic Hollow Carbon Spheres for High-Performance Anode Material in Lithium-Ion Batteries
journal, March 2008

Efficient sodium storage: Experimental study of anode with additive-free ether-based electrolyte system
journal, May 2017