Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion

Oh, Hee Jeung; Park, Jaesung; Inceoglu, Sebnem; Villaluenga, Irune; Thelen, Jacob L.; Jiang, Xi; McGrath, James E.; Paul, Donald R.

doi:10.1016/j.polymer.2016.12.035

Title: Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion

Authors:: Oh, Hee Jeung; Park, Jaesung; Inceoglu, Sebnem; Villaluenga, Irune; Thelen, Jacob L.; Jiang, Xi; McGrath, James E.; Paul, Donald R.

Publication Date:: 2017-01-01

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1411807

Grant/Contract Number:: AC02-05CH11231

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Polymer

Additional Journal Information:: Journal Name: Polymer Journal Volume: 109 Journal Issue: C; Journal ID: ISSN 0032-3861

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Oh, Hee Jeung, Park, Jaesung, Inceoglu, Sebnem, Villaluenga, Irune, Thelen, Jacob L., Jiang, Xi, McGrath, James E., and Paul, Donald R.. Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion.  United Kingdom: N. p., 2017. 
Web.  doi:10.1016/j.polymer.2016.12.035.

Copy to clipboard


                    Oh, Hee Jeung, Park, Jaesung, Inceoglu, Sebnem, Villaluenga, Irune, Thelen, Jacob L., Jiang, Xi, McGrath, James E., & Paul, Donald R.. Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion.  United Kingdom.  https://doi.org/10.1016/j.polymer.2016.12.035

Copy to clipboard


                    Oh, Hee Jeung, Park, Jaesung, Inceoglu, Sebnem, Villaluenga, Irune, Thelen, Jacob L., Jiang, Xi, McGrath, James E., and Paul, Donald R.. Sun .  
"Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion".  United Kingdom.  https://doi.org/10.1016/j.polymer.2016.12.035.

Copy to clipboard


                    
@article{osti_1411807,

  title        = {Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion},

  author       = {Oh, Hee Jeung and Park, Jaesung and Inceoglu, Sebnem and Villaluenga, Irune and Thelen, Jacob L. and Jiang, Xi and McGrath, James E. and Paul, Donald R.},

  abstractNote = {},

  doi          = {10.1016/j.polymer.2016.12.035},

  journal      = {Polymer},

  number       = C,

  volume       = 109,

  place        = {United Kingdom},

  year         = {2017},

  month        = {1}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.polymer.2016.12.035

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 6 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Synthesis and characterization of multiblock partially fluorinated hydrophobic poly(arylene ether sulfone)-hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes
journal, February 2013

Chen, Yu; Rowlett, Jarrett R.; Lee, Chang Hyun
Journal of Polymer Science Part A: Polymer Chemistry, Vol. 51, Issue 10
DOI: 10.1002/pola.26618

Sulfonated polysulfone
journal, July 1976

Noshay, A.; Robeson, L. M.
Journal of Applied Polymer Science, Vol. 20, Issue 7
DOI: 10.1002/app.1976.070200717

Alternative Polymer Systems for Proton Exchange Membranes (PEMs)
journal, October 2004

Hickner, Michael A.; Ghassemi, Hossein; Kim, Yu Seung
Chemical Reviews, Vol. 104, Issue 10
DOI: 10.1021/cr020711a

Mass transfer within the gas-phase of porous media
journal, March 2000

Kast, W.; Hohenthanner, C. -R.
International Journal of Heat and Mass Transfer, Vol. 43, Issue 5
DOI: 10.1016/S0017-9310(99)00158-1

Scalable Fabrication of Carbon Nanotube/Polymer Nanocomposite Membranes for High Flux Gas Transport
journal, September 2007

Kim, Sangil; Jinschek, Joerg R.; Chen, Haibin
Nano Letters, Vol. 7, Issue 9
DOI: 10.1021/nl071414u

Film blowing of linear low-density polyethylene blended with a novel hyperbranched polymer processing aid
journal, October 2000

Hong, Y.; Coombs, S. J.; Cooper-White, J. J.
Polymer, Vol. 41, Issue 21
DOI: 10.1016/S0032-3861(00)00130-0

Kinetics of poly(ethylene glycol) extraction into water from plasticized disulfonated poly(arylene ether sulfone) desalination membranes prepared by solvent-free melt processing
journal, February 2017

Oh, Hee Jeung; McGrath, James E.; Paul, Donald R.
Journal of Membrane Science, Vol. 524
DOI: 10.1016/j.memsci.2016.11.036

Mechanical relaxation in some oxide polymers
journal, January 1962

Read, B.
Polymer, Vol. 3
DOI: 10.1016/0032-3861(62)90100-3

Preparation, surface modification and characterisation of solution cast starch PVA blended films
journal, February 2004

Jayasekara, R.; Harding, I.; Bowater, I.
Polymer Testing, Vol. 23, Issue 1
DOI: 10.1016/S0142-9418(03)00049-7

Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes
journal, March 2002

Wang, Feng; Hickner, Michael; Kim, Yu Seung
Journal of Membrane Science, Vol. 197, Issue 1-2
DOI: 10.1016/S0376-7388(01)00620-2

Effects of frequency, molecular weight and thermal oxidation on the dynamic mechanical response of poly (ethylene oxide)
journal, January 1991

Bigger, S. W.; Scheirs, J.; Delatycki, O.
Polymer International, Vol. 26, Issue 3
DOI: 10.1002/pi.4990260310

Fundamental salt and water transport properties in directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers
journal, April 2011

Xie, Wei; Cook, Joe; Park, Ho Bum
Polymer, Vol. 52, Issue 9
DOI: 10.1016/j.polymer.2011.02.006

Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties
journal, August 2010

Ponting, Michael; Hiltner, Anne; Baer, Eric
Macromolecular Symposia, Vol. 294, Issue 1
DOI: 10.1002/masy.201050803

Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
journal, January 2014

Oh, Hee Jeung; Freeman, Benny D.; McGrath, James E.
Polymer, Vol. 55, Issue 1
DOI: 10.1016/j.polymer.2013.11.041

A review of thermal methods used for the analysis of the crystal form, solution thermodynamics and glass transition behaviour of polyethylene glycols
journal, January 1995

Craig, Duncan Q. M.
Thermochimica Acta, Vol. 248
DOI: 10.1016/0040-6031(94)01886-L

Composite reverse osmosis and nanofiltration membranes
journal, August 1993

Petersen, Robert J.
Journal of Membrane Science, Vol. 83, Issue 1
DOI: 10.1016/0376-7388(93)80014-O

Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes
journal, May 2006

Li, Yanxiang; Wang, Feng; Yang, Juan
Polymer, Vol. 47, Issue 11
DOI: 10.1016/j.polymer.2006.03.003

Ion-exchange membranes: preparative methods for electrodialysis and fuel cell applications
journal, October 2006

Kariduraganavar, M. Y.; Nagarale, R. K.; Kittur, A. A.
Desalination, Vol. 197, Issue 1-3
DOI: 10.1016/j.desal.2006.01.019

Advances in membrane materials: desalination membranes based on directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers
journal, February 2010

Xie, Wei; Park, Ho-Bum; Cook, Joseph
Water Science and Technology, Vol. 61, Issue 3
DOI: 10.2166/wst.2010.883

Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability
journal, November 2004

Kim, Yu Seung; Hickner, Michael A.; Dong, Limin
Journal of Membrane Science, Vol. 243, Issue 1-2
DOI: 10.1016/j.memsci.2004.06.035

Towards Extrusion of Ionomers to Process Fuel Cell Membranes
journal, July 2011

Molmeret, Yannick; Chabert, France; Kissi, Nadia El
Polymers, Vol. 3, Issue 3
DOI: 10.3390/polym3031126

Radiation damage in the TEM and SEM
journal, August 2004

Egerton, R. F.; Li, P.; Malac, M.
Micron, Vol. 35, Issue 6
DOI: 10.1016/j.micron.2004.02.003

Porosity enhancement in β nucleated isotactic polypropylene stretched films by thermal annealing
journal, April 2013

Offord, Grant T.; Armstrong, Shannon R.; Freeman, Benny D.
Polymer, Vol. 54, Issue 10
DOI: 10.1016/j.polymer.2013.03.026

Highly Chlorine-Tolerant Polymers for Desalination
journal, July 2008

Park, Ho Bum; Freeman, Benny D.; Zhang, Zhong-Bio
Angewandte Chemie International Edition, Vol. 47, Issue 32
DOI: 10.1002/anie.200800454

Effect of Substrate on the Isothermal Crystallization Kinetics of Confined Poly(ε-caprolactone) Nanolayers
journal, October 2010

Ponting, Michael; Lin, Yijian; Keum, Jong K.
Macromolecules, Vol. 43, Issue 20
DOI: 10.1021/ma101625h

Flow and Diffusion of Gases in Porous Media
journal, April 1967

Mason, E. A.; Malinauskas, A. P.; Evans, R. B.
The Journal of Chemical Physics, Vol. 46, Issue 8
DOI: 10.1063/1.1841191

Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes
journal, September 2003

Kim, Yu Seung; Dong, Limin; Hickner, Michael A.
Polymer, Vol. 44, Issue 19
DOI: 10.1016/S0032-3861(03)00580-9

Rheological studies of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
journal, March 2014

Oh, Hee Jeung; Freeman, Benny D.; McGrath, James E.
Polymer, Vol. 55, Issue 6
DOI: 10.1016/j.polymer.2014.02.011

Relaxation phenomena in some aromatic polymers: effect of water content on the low temperature relaxation
journal, February 1971

Allen, G.; McAinsh, J.; Jeffs, G. M.
Polymer, Vol. 12, Issue 2
DOI: 10.1016/0032-3861(71)90002-4

Disulfonated Poly(arylene ether sulfone) Random Copolymer Blends Tuned for Rapid Water Permeation via Cation Complexation with Poly(ethylene glycol) Oligomers
journal, February 2011

Lee, Chang Hyun; VanHouten, Desmond; Lane, Ozma
Chemistry of Materials, Vol. 23, Issue 4
DOI: 10.1021/cm1032173

Processing of PEMFC membranes by extrusion: Part 1. Sulfonated polysulfone in acid form
journal, January 2006

Bébin, Philippe; Galiano, Hervé
Advances in Polymer Technology, Vol. 25, Issue 2
DOI: 10.1002/adv.20066

Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine
journal, June 2012

Xie, Wei; Geise, Geoffrey M.; Freeman, Benny D.
Journal of Membrane Science, Vol. 403-404
DOI: 10.1016/j.memsci.2012.02.038

Relaxation Studies in PEO/PMMA Blends
journal, February 2000

Dionísio, Madalena; Fernandes, Anabela C.; Mano, João F.
Macromolecules, Vol. 33, Issue 3
DOI: 10.1021/ma9913818

The Influence of Preparation Conditions on the Surface Morphology of Poly(vinylidene fluoride) Films
journal, January 2001

Benz, Marcel; Euler, William B.; Gregory, Otto J.
Langmuir, Vol. 17, Issue 1
DOI: 10.1021/la001206g

Influence of processing strategies on porosity and permeability of β nucleated isotactic polypropylene stretched films
journal, May 2013

Offord, Grant T.; Armstrong, Shannon R.; Freeman, Benny D.
Polymer, Vol. 54, Issue 11
DOI: 10.1016/j.polymer.2013.03.050

Processing of sulfonated polysulfone for PEMFC membrane applications: Part 2. Polymer in salt form
journal, January 2006

Bébin, Philippe; Galiano, Hervé
Advances in Polymer Technology, Vol. 25, Issue 2
DOI: 10.1002/adv.20067

Extrusion: An environmentally friendly process for PEMFC membrane elaboration
journal, December 2007

Sanchez, J. -Y.; Chabert, F.; Iojoiu, C.
Electrochimica Acta, Vol. 53, Issue 4
DOI: 10.1016/j.electacta.2007.04.022

Dynamic mechanical relaxations of poly(vinylidene fluoride)-poly(vinylpyrrolidone) blends
journal, July 1989

Ceccorulli, G.; Pizzoli, M.; Scandola, M.
Polymer, Vol. 30, Issue 7
DOI: 10.1016/0032-3861(89)90044-X

Influence of processing history on water and salt transport properties of disulfonated polysulfone random copolymers
journal, March 2012

Xie, Wei; Geise, Geoffrey M.; Freeman, Benny D.
Polymer, Vol. 53, Issue 7
DOI: 10.1016/j.polymer.2012.01.046

Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM-based fuel cell systems. I. Synthesis and characterization
journal, January 2005

Wiles, K. B.; Wang, F.; McGrath, J. E.
Journal of Polymer Science Part A: Polymer Chemistry, Vol. 43, Issue 14
DOI: 10.1002/pola.20744

Similar Records in DOE PAGES and OSTI.GOV collections:

Effects of Block Length and Solution-Casting Conditions on the Final Morphology and Properties of Disulfonated Poly(arylene ether sulfone) Multiblock Copolymer Films for Proton Exchange Membranes

Journal Article Lee, M ; Park, J ; Lee, H ; ... - Polymer

The effects of block length and solution-casting conditions on the final microstructures and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer (BPSH100-BPS0) films for proton exchange membranes were investigated based on the basic principles of microstructure formation of block copolymers. Morphological studies using transmission electron microscopy and small angle X-ray scattering demonstrated that as the block length increased, the inter-ionic-domain distance increased, with a subsequent increase in lamellar ordering and long-range continuity. Further enhancement in morphological order was achieved by simply utilizing a selective solvent, dimethylacetamide, which is good and marginal for the sulfonated and unsulfonated blocks, respectively, rather thanmore »« less
https://doi.org/10.1016/j.polymer.2009.10.023
Multiblock poly(arylene ether nitrile) disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes: Part 2 electrochemical and H2/Air fuel cell analysis

Journal Article Rowlett, Jarrett R. ; Lilavivat, Visarn ; Shaver, Andrew T. ; ... - Polymer

Not provided.
https://doi.org/10.1016/j.polymer.2017.06.050
Multiblock poly(arylene ether nitrile) disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes: Part 2 electrochemical and H2/Air fuel cell analysis

Journal Article Rowlett, Jarrett R. ; Lilavivat, Visarn ; Shaver, Andrew T. ; ... - Polymer
Cited by 18
https://doi.org/10.1016/j.polymer.2017.06.050
Disulfonated Poly(arylene ether sulfone) Random Copolymers Containing Hierarchical Iptycene Units for Proton Exchange Membranes

Journal Article Wang, Tao ; Li, Tianyun ; Aboki, Joseph ; ... - Frontiers in Chemistry

Two series of disulfonated iptycene-based poly(arylene ether sulfone) random copolymers, i.e., TRP-BP (triptycene-based) and PENT-BP (pentiptycene-based), were synthesized via condensation polymerization from disulfonated monomer and comonomers to prepare proton exchange membranes (PEMs) for potential applications in electrochemical devices such as fuel cell. To investigate the effect of iptycene units on membrane performance, these copolymers were systematically varied in composition (i.e., iptycene content) and the degree of sulfonation (i.e., 30–50%), which were characterized comprehensively in terms of water uptake, swelling ratio, oxidative stability, thermal and mechanical properties, and proton conductivity at various temperatures. Comparing to copolymers without iptycene units, TRP-BP andmore »« less
https://doi.org/10.3389/fchem.2020.00674

Full Text Available
Chlorine resistant desalination membranes based on directly sulfonated poly(arylene ether sulfone) copolymers

Patent McGrath, James E ; Park, Ho Bum ; Freeman, Benny D

The present invention provides a membrane, kit, and method of making a hydrophilic-hydrophobic random copolymer membrane. The hydrophilic-hydrophobic random copolymer membrane includes a hydrophilic-hydrophobic random copolymer. The hydrophilic-hydrophobic random copolymer includes one or more hydrophilic monomers having a sulfonated polyarylsulfone monomer and a second monomer and one or more hydrophobic monomers having a non-sulfonated third monomer and a fourth monomer. The sulfonated polyarylsulfone monomer introduces a sulfonate into the hydrophilic-hydrophobic random copolymer prior to polymerization.
Full Text Available

Similar Records

Title: Formation of disulfonated poly(arylene ether sulfone) thin film desalination membranes plasticized with poly(ethylene glycol) by solvent-free melt extrusion

Citation Formats

Synthesis and characterization of multiblock partially fluorinated hydrophobic poly(arylene ether sulfone)-hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes journal, February 2013

Sulfonated polysulfone journal, July 1976

Alternative Polymer Systems for Proton Exchange Membranes (PEMs) journal, October 2004

Mass transfer within the gas-phase of porous media journal, March 2000

Scalable Fabrication of Carbon Nanotube/Polymer Nanocomposite Membranes for High Flux Gas Transport journal, September 2007

Film blowing of linear low-density polyethylene blended with a novel hyperbranched polymer processing aid journal, October 2000

Kinetics of poly(ethylene glycol) extraction into water from plasticized disulfonated poly(arylene ether sulfone) desalination membranes prepared by solvent-free melt processing journal, February 2017

Mechanical relaxation in some oxide polymers journal, January 1962

Preparation, surface modification and characterisation of solution cast starch PVA blended films journal, February 2004

Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes journal, March 2002

Effects of frequency, molecular weight and thermal oxidation on the dynamic mechanical response of poly (ethylene oxide) journal, January 1991

Fundamental salt and water transport properties in directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers journal, April 2011

Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties journal, August 2010

Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation journal, January 2014

A review of thermal methods used for the analysis of the crystal form, solution thermodynamics and glass transition behaviour of polyethylene glycols journal, January 1995

Composite reverse osmosis and nanofiltration membranes journal, August 1993

Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes journal, May 2006

Ion-exchange membranes: preparative methods for electrodialysis and fuel cell applications journal, October 2006

Advances in membrane materials: desalination membranes based on directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers journal, February 2010

Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability journal, November 2004

Towards Extrusion of Ionomers to Process Fuel Cell Membranes journal, July 2011

Radiation damage in the TEM and SEM journal, August 2004

Porosity enhancement in β nucleated isotactic polypropylene stretched films by thermal annealing journal, April 2013

Highly Chlorine-Tolerant Polymers for Desalination journal, July 2008

Effect of Substrate on the Isothermal Crystallization Kinetics of Confined Poly(ε-caprolactone) Nanolayers journal, October 2010

Flow and Diffusion of Gases in Porous Media journal, April 1967

Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes journal, September 2003

Rheological studies of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation journal, March 2014

Relaxation phenomena in some aromatic polymers: effect of water content on the low temperature relaxation journal, February 1971

Disulfonated Poly(arylene ether sulfone) Random Copolymer Blends Tuned for Rapid Water Permeation via Cation Complexation with Poly(ethylene glycol) Oligomers journal, February 2011

Processing of PEMFC membranes by extrusion: Part 1. Sulfonated polysulfone in acid form journal, January 2006

Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine journal, June 2012

Relaxation Studies in PEO/PMMA Blends journal, February 2000

The Influence of Preparation Conditions on the Surface Morphology of Poly(vinylidene fluoride) Films journal, January 2001

Influence of processing strategies on porosity and permeability of β nucleated isotactic polypropylene stretched films journal, May 2013

Processing of sulfonated polysulfone for PEMFC membrane applications: Part 2. Polymer in salt form journal, January 2006

Extrusion: An environmentally friendly process for PEMFC membrane elaboration journal, December 2007

Dynamic mechanical relaxations of poly(vinylidene fluoride)-poly(vinylpyrrolidone) blends journal, July 1989

Influence of processing history on water and salt transport properties of disulfonated polysulfone random copolymers journal, March 2012

Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM-based fuel cell systems. I. Synthesis and characterization journal, January 2005

Synthesis and characterization of multiblock partially fluorinated hydrophobic poly(arylene ether sulfone)-hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes
journal, February 2013

Sulfonated polysulfone
journal, July 1976

Alternative Polymer Systems for Proton Exchange Membranes (PEMs)
journal, October 2004

Mass transfer within the gas-phase of porous media
journal, March 2000

Scalable Fabrication of Carbon Nanotube/Polymer Nanocomposite Membranes for High Flux Gas Transport
journal, September 2007

Film blowing of linear low-density polyethylene blended with a novel hyperbranched polymer processing aid
journal, October 2000

Kinetics of poly(ethylene glycol) extraction into water from plasticized disulfonated poly(arylene ether sulfone) desalination membranes prepared by solvent-free melt processing
journal, February 2017

Mechanical relaxation in some oxide polymers
journal, January 1962

Preparation, surface modification and characterisation of solution cast starch PVA blended films
journal, February 2004

Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes
journal, March 2002

Effects of frequency, molecular weight and thermal oxidation on the dynamic mechanical response of poly (ethylene oxide)
journal, January 1991

Fundamental salt and water transport properties in directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers
journal, April 2011

Polymer Nanostructures by Forced Assembly: Process, Structure, and Properties
journal, August 2010

Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
journal, January 2014

A review of thermal methods used for the analysis of the crystal form, solution thermodynamics and glass transition behaviour of polyethylene glycols
journal, January 1995

Composite reverse osmosis and nanofiltration membranes
journal, August 1993

Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes
journal, May 2006

Ion-exchange membranes: preparative methods for electrodialysis and fuel cell applications
journal, October 2006

Advances in membrane materials: desalination membranes based on directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers
journal, February 2010

Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability
journal, November 2004

Towards Extrusion of Ionomers to Process Fuel Cell Membranes
journal, July 2011

Radiation damage in the TEM and SEM
journal, August 2004

Porosity enhancement in β nucleated isotactic polypropylene stretched films by thermal annealing
journal, April 2013

Highly Chlorine-Tolerant Polymers for Desalination
journal, July 2008

Effect of Substrate on the Isothermal Crystallization Kinetics of Confined Poly(ε-caprolactone) Nanolayers
journal, October 2010

Flow and Diffusion of Gases in Porous Media
journal, April 1967

Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes
journal, September 2003

Rheological studies of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
journal, March 2014

Relaxation phenomena in some aromatic polymers: effect of water content on the low temperature relaxation
journal, February 1971

Disulfonated Poly(arylene ether sulfone) Random Copolymer Blends Tuned for Rapid Water Permeation via Cation Complexation with Poly(ethylene glycol) Oligomers
journal, February 2011

Processing of PEMFC membranes by extrusion: Part 1. Sulfonated polysulfone in acid form
journal, January 2006

Polyamide interfacial composite membranes prepared from m-phenylene diamine, trimesoyl chloride and a new disulfonated diamine
journal, June 2012

Relaxation Studies in PEO/PMMA Blends
journal, February 2000

The Influence of Preparation Conditions on the Surface Morphology of Poly(vinylidene fluoride) Films
journal, January 2001

Influence of processing strategies on porosity and permeability of β nucleated isotactic polypropylene stretched films
journal, May 2013

Processing of sulfonated polysulfone for PEMFC membrane applications: Part 2. Polymer in salt form
journal, January 2006

Extrusion: An environmentally friendly process for PEMFC membrane elaboration
journal, December 2007

Dynamic mechanical relaxations of poly(vinylidene fluoride)-poly(vinylpyrrolidone) blends
journal, July 1989

Influence of processing history on water and salt transport properties of disulfonated polysulfone random copolymers
journal, March 2012

Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM-based fuel cell systems. I. Synthesis and characterization
journal, January 2005