Evolution of the pore size distribution in sheared binary glasses

Priezjev, Nikolai V.; Makeev, Maxim A.

doi:10.1103/PhysRevE.96.053004

Title: Evolution of the pore size distribution in sheared binary glasses

Authors:: Priezjev, Nikolai V.; Makeev, Maxim A.

Publication Date:: Wed Nov 22 00:00:00 EST 2017

Sponsoring Org.:: USDOE

OSTI Identifier:: 1409878

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Physical Review E

Additional Journal Information:: Journal Name: Physical Review E Journal Volume: 96 Journal Issue: 5; Journal ID: ISSN 2470-0045

Publisher:: American Physical Society

Country of Publication:: United States

Language:: English

Citation Formats


                    Priezjev, Nikolai V., and Makeev, Maxim A. Evolution of the pore size distribution in sheared binary glasses.  United States: N. p., 2017. 
Web.  doi:10.1103/PhysRevE.96.053004.

Copy to clipboard


                    Priezjev, Nikolai V., & Makeev, Maxim A. Evolution of the pore size distribution in sheared binary glasses.  United States.  https://doi.org/10.1103/PhysRevE.96.053004

Copy to clipboard


                    Priezjev, Nikolai V., and Makeev, Maxim A. Wed .  
"Evolution of the pore size distribution in sheared binary glasses".  United States.  https://doi.org/10.1103/PhysRevE.96.053004.

Copy to clipboard


                    
@article{osti_1409878,

  title        = {Evolution of the pore size distribution in sheared binary glasses},

  author       = {Priezjev, Nikolai V. and Makeev, Maxim A.},

  abstractNote = {},

  doi          = {10.1103/PhysRevE.96.053004},

  journal      = {Physical Review E},

  number       = 5,

  volume       = 96,

  place        = {United States},

  year         = {Wed Nov 22 00:00:00 EST 2017},

  month        = {Wed Nov 22 00:00:00 EST 2017}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1103/PhysRevE.96.053004

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Aluminium foam—modulus of elasticity and electrical conductivity according to percolation theory
journal, June 1998

Kovác̆ik, J.; Simanc̆ı́k, F.
Scripta Materialia, Vol. 39, Issue 2
DOI: 10.1016/S1359-6462(98)00151-1

An image-based reconstruction of the 3D geometry of an Al open-cell foam and FEM modeling of the material response
journal, February 2010

Michailidis, N.; Stergioudi, F.; Omar, H.
Mechanics of Materials, Vol. 42, Issue 2
DOI: 10.1016/j.mechmat.2009.10.006

Solutions for effective shear properties in three phase sphere and cylinder models
journal, August 1979

Christensen, R. M.; Lo, K. H.
Journal of the Mechanics and Physics of Solids, Vol. 27, Issue 4
DOI: 10.1016/0022-5096(79)90032-2

Young's modulus of porous materials: Part 1 Theoretical derivation of modulus-porosity correlation
journal, March 1984

Wang, James C.
Journal of Materials Science, Vol. 19, Issue 3
DOI: 10.1007/BF00540451

Hierarchically porous materials: synthesis strategies and structure design
journal, January 2017

Yang, Xiao-Yu; Chen, Li-Hua; Li, Yu
Chemical Society Reviews, Vol. 46, Issue 2
DOI: 10.1039/C6CS00829A

Young's modulus of porous materials: Part 2 Young's modulus of porous alumina with changing pore structure
journal, March 1984

Wang, James C.
Journal of Materials Science, Vol. 19, Issue 3
DOI: 10.1007/BF00540452

Aggregation dynamics, structure, and mechanical properties of bigels
journal, January 2014

Di Michele, L.; Fiocco, D.; Varrato, F.
Soft Matter, Vol. 10, Issue 20
DOI: 10.1039/C3SM52558A

A note on two problems in connexion with graphs
journal, December 1959

Dijkstra, E. W.
Numerische Mathematik, Vol. 1, Issue 1
DOI: 10.1007/BF01386390

Testing mode-coupling theory for a supercooled binary Lennard-Jones mixture I: The van Hove correlation function
journal, May 1995

Kob, Walter; Andersen, Hans C.
Physical Review E, Vol. 51, Issue 5
DOI: 10.1103/PhysRevE.51.4626

Structural Correlations and Mechanical Behavior in Nanophase Silica Glasses
journal, May 1999

Campbell, Timothy; Kalia, Rajiv K.; Nakano, Aiichiro
Physical Review Letters, Vol. 82, Issue 20
DOI: 10.1103/PhysRevLett.82.4018

Addressing Challenges of Identifying Geometrically Diverse Sets of Crystalline Porous Materials
journal, December 2011

Martin, Richard Luis; Smit, Berend; Haranczyk, Maciej
Journal of Chemical Information and Modeling, Vol. 52, Issue 2
DOI: 10.1021/ci200386x

Arrested phase separation in a short-ranged attractive colloidal system: A numerical study
journal, June 2005

Foffi, G.; De Michele, C.; Sciortino, F.
The Journal of Chemical Physics, Vol. 122, Issue 22
DOI: 10.1063/1.1924704

Structure-property relationships in nanoporous metallic glasses
journal, March 2016

Şopu, D.; Soyarslan, C.; Sarac, B.
Acta Materialia, Vol. 106
DOI: 10.1016/j.actamat.2015.12.026

Atomistic process of plastic deformation in a model amorphous metal
journal, September 1981

Maeda, K.; Takeuchi, S.
Philosophical Magazine A, Vol. 44, Issue 3
DOI: 10.1080/01418618108236167

Fast Parallel Algorithms for Short-Range Molecular Dynamics
journal, March 1995

Plimpton, Steve
Journal of Computational Physics, Vol. 117, Issue 1
DOI: 10.1006/jcph.1995.1039

Elastic constant- porosity relations for polycrystalline thoria
journal, January 1963

Spinner, S.; Knudsen, F. P.; Stone, L.
Journal of Research of the National Bureau of Standards, Section C: Engineering and Instrumentation, Vol. 67C, Issue 1
DOI: 10.6028/jres.067C.005

Intermittent dynamics and logarithmic domain growth during the spinodal decomposition of a glass-forming liquid
journal, April 2014

Testard, Vincent; Berthier, Ludovic; Kob, Walter
The Journal of Chemical Physics, Vol. 140, Issue 16
DOI: 10.1063/1.4871624

Effects of pores on shear bands in metallic glasses: A molecular dynamics study
journal, November 2010

Wang, Jiangting; Hodgson, Peter D.; Zhang, Jingde
Computational Materials Science, Vol. 50, Issue 1
DOI: 10.1016/j.commatsci.2010.08.001

Influence of the Glass Transition on the Liquid-Gas Spinodal Decomposition
journal, March 2011

Testard, Vincent; Berthier, Ludovic; Kob, Walter
Physical Review Letters, Vol. 106, Issue 12
DOI: 10.1103/PhysRevLett.106.125702

Microstructural characteristics and elastic modulus of porous solids
journal, May 2015

Chen, Zhangwei; Wang, Xin; Giuliani, Finn
Acta Materialia, Vol. 89
DOI: 10.1016/j.actamat.2015.02.014

Strain Localization and Percolation of Stable Structure in Amorphous Solids
journal, August 2005

Shi, Yunfeng; Falk, Michael L.
Physical Review Letters, Vol. 95, Issue 9
DOI: 10.1103/PhysRevLett.95.095502

Average stress in matrix and average elastic energy of materials with misfitting inclusions
journal, May 1973

Mori, T.; Tanaka, K.
Acta Metallurgica, Vol. 21, Issue 5
DOI: 10.1016/0001-6160(73)90064-3

The viscosity of suspensions of rigid spheres
journal, August 1952

Roscoe, R.
British Journal of Applied Physics, Vol. 3, Issue 8
DOI: 10.1088/0508-3443/3/8/306

Spreading plastic failure as a mechanism for the shear modulus reduction in amorphous solids
journal, May 2015

Chikkadi, Vijayakumar; Gendelman, Oleg; Ilyin, Valery
EPL (Europhysics Letters), Vol. 110, Issue 4
DOI: 10.1209/0295-5075/110/48001

Numerical modeling of pore size and distribution in foamed titanium
journal, August 2006

Shen, H.; Oppenheimer, S. M.; Dunand, D. C.
Mechanics of Materials, Vol. 38, Issue 8-10
DOI: 10.1016/j.mechmat.2005.06.027

Pore Size Distributions in Porous Glasses: A Computer Simulation Study
journal, January 1999

Gelb, Lev D.; Gubbins, K. E.
Langmuir, Vol. 15, Issue 2
DOI: 10.1021/la9808418

Algorithms and tools for high-throughput geometry-based analysis of crystalline porous materials
journal, February 2012

Willems, Thomas F.; Rycroft, Chris H.; Kazi, Michaeel
Microporous and Mesoporous Materials, Vol. 149, Issue 1
DOI: 10.1016/j.micromeso.2011.08.020

The determination of the elastic field of an ellipsoidal inclusion, and related problems
journal, August 1957

Eshelby, John Douglas
Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 241, Issue 1226, p. 376-396
DOI: 10.1098/rspa.1957.0133

Nondestructive evaluation of elastic parameters of sintered iron powder compacts
journal, February 1990

Panakkal, J. P.; Willems, H.; Arnold, W.
Journal of Materials Science, Vol. 25, Issue 2
DOI: 10.1007/BF00585456

Structural and Mechanical Properties of Nanoporous Silica
journal, December 2013

Rimsza, J. M.; Du, Jincheng
Journal of the American Ceramic Society, Vol. 97, Issue 3
DOI: 10.1111/jace.12707

Microstructure and mechanical properties of sintered glass
journal, November 1990

Coronel, L.; Jernot, J. P.; Osterstock, F.
Journal of Materials Science, Vol. 25, Issue 11
DOI: 10.1007/BF01129954

Characterization of the structure and permeability of titanium foams for spinal fusion devices
journal, January 2009

Singh, R.; Lee, P.; Lindley, T.
Acta Biomaterialia, Vol. 5, Issue 1
DOI: 10.1016/j.actbio.2008.06.014

Similar Records in DOE PAGES and OSTI.GOV collections:

Experimental Study of Porosity Changes in Shale Caprocks Exposed to CO₂-Saturated Brines I: Evolution of Mineralogy, Pore Connectivity, Pore Size Distribution, and Surface Area

Journal Article Mouzakis, Katherine M. ; Navarre-Sitchler, Alexis K. ; Rother, Gernot ; ... - Environmental Engineering Science

Carbon capture, utilization, and storage, one proposed method of reducing anthropogenic emissions of CO₂, relies on low permeability formations, such as shales, above injection formations to prevent upward migration of the injected CO₂. Porosity in caprocks evaluated for sealing capacity before injection can be altered by geochemical reactions induced by dissolution of injected CO₂ into pore fluids, impacting long-term sealing capacity. Therefore, long-term performance of CO₂ sequestration sites may be dependent on both initial distribution and connectivity of pores in caprocks, and on changes induced by geochemical reaction after injection of CO₂, which are currently poorly understood. This paper presentsmore »« less
Cited by 48
https://doi.org/10.1089/ees.2015.0588

Full Text Available
Effects of Coupled Chemo-Mechanical Processes on the Evolution of Pore-Size Distributions in Geological Media

Book Emmanuel, S. ; Anovitz, Lawrence ; Day-stirrat, R. J.
https://doi.org/10.1515/9781501502071-003
Evolution of the pore size distribution in final stage sintering of alumina measured by small-angle x-ray scattering.

Journal Article Krueger, S ; Long, G G ; Black, D R ; ... - J. Am. Ceram. Soc.

Small-angle X-ray scattering was used to follow the evolution of the pore size distribution during final-stage sintering of alumina and of alumina doped with 0.25 wt% magnesia. The volume-weighted (Guinier) results indicate that the effective size of the largest pores increases as the body goes from 97% to more than 99% dense. The surface-area-weighted (Porod) results show that the median size of the smallest pores decreases slightly over the same density range. Taken together, these data indicate that the pore size distribution becomes broader as final-stage densification proceeds. This was confirmed by a maximum entropy analysis, which was used tomore »« less
https://doi.org/10.1111/j.1151-2916.1991.tb06796.x
Evolution of pore size distribution of sandstone under dynamic loading [Slides]

Technical Report Leong, Andrew ; Asare, Elaine ; Kannan, Vignesh ; ...

Abstract not provided.
https://doi.org/10.2172/1924394

Full Text Available
Deactivation phenomena by site poisoning and pore blockage: the effect of catalyst size, pore size, and pore size distribution

Journal Article Tsakalis, K S ; Tsotsis, T T ; Stiegel, G J - J. Catal.; (United States)

The problem of catalyst deactivation by active site poisoning and pore blockage is analyzed. The effect of catalyst size, average pore size, and pore size distribution on the phenomenon of deactivation is investigated for two simple pore structure models, i.e., the single pore and parallel bundle of pores models. It is shown that the overall catalytic behavior and performance strongly depend on the catalyst's physical properties, such as its size, pore size, and pore size distribution. The mathematical models studied here are admittedly only oversimplified analogs of the complex physicochemical phenomena occurring during realistic industrial processes. The main qualitative features,more »« less
https://doi.org/10.1016/0021-9517(84)90063-0

Similar Records

Title: Evolution of the pore size distribution in sheared binary glasses

Citation Formats

Aluminium foam—modulus of elasticity and electrical conductivity according to percolation theory journal, June 1998

An image-based reconstruction of the 3D geometry of an Al open-cell foam and FEM modeling of the material response journal, February 2010

Solutions for effective shear properties in three phase sphere and cylinder models journal, August 1979

Young's modulus of porous materials: Part 1 Theoretical derivation of modulus-porosity correlation journal, March 1984

Hierarchically porous materials: synthesis strategies and structure design journal, January 2017

Young's modulus of porous materials: Part 2 Young's modulus of porous alumina with changing pore structure journal, March 1984

Aggregation dynamics, structure, and mechanical properties of bigels journal, January 2014

A note on two problems in connexion with graphs journal, December 1959

Testing mode-coupling theory for a supercooled binary Lennard-Jones mixture I: The van Hove correlation function journal, May 1995

Structural Correlations and Mechanical Behavior in Nanophase Silica Glasses journal, May 1999

Addressing Challenges of Identifying Geometrically Diverse Sets of Crystalline Porous Materials journal, December 2011

Arrested phase separation in a short-ranged attractive colloidal system: A numerical study journal, June 2005

Structure-property relationships in nanoporous metallic glasses journal, March 2016

Atomistic process of plastic deformation in a model amorphous metal journal, September 1981

Fast Parallel Algorithms for Short-Range Molecular Dynamics journal, March 1995

Elastic constant- porosity relations for polycrystalline thoria journal, January 1963

Intermittent dynamics and logarithmic domain growth during the spinodal decomposition of a glass-forming liquid journal, April 2014

Effects of pores on shear bands in metallic glasses: A molecular dynamics study journal, November 2010

Influence of the Glass Transition on the Liquid-Gas Spinodal Decomposition journal, March 2011

Microstructural characteristics and elastic modulus of porous solids journal, May 2015

Strain Localization and Percolation of Stable Structure in Amorphous Solids journal, August 2005

Average stress in matrix and average elastic energy of materials with misfitting inclusions journal, May 1973

The viscosity of suspensions of rigid spheres journal, August 1952

Spreading plastic failure as a mechanism for the shear modulus reduction in amorphous solids journal, May 2015

Numerical modeling of pore size and distribution in foamed titanium journal, August 2006

Pore Size Distributions in Porous Glasses: A Computer Simulation Study journal, January 1999

Algorithms and tools for high-throughput geometry-based analysis of crystalline porous materials journal, February 2012

The determination of the elastic field of an ellipsoidal inclusion, and related problems journal, August 1957

Nondestructive evaluation of elastic parameters of sintered iron powder compacts journal, February 1990

Structural and Mechanical Properties of Nanoporous Silica journal, December 2013

Microstructure and mechanical properties of sintered glass journal, November 1990

Characterization of the structure and permeability of titanium foams for spinal fusion devices journal, January 2009

Aluminium foam—modulus of elasticity and electrical conductivity according to percolation theory
journal, June 1998

An image-based reconstruction of the 3D geometry of an Al open-cell foam and FEM modeling of the material response
journal, February 2010

Solutions for effective shear properties in three phase sphere and cylinder models
journal, August 1979

Young's modulus of porous materials: Part 1 Theoretical derivation of modulus-porosity correlation
journal, March 1984

Hierarchically porous materials: synthesis strategies and structure design
journal, January 2017

Young's modulus of porous materials: Part 2 Young's modulus of porous alumina with changing pore structure
journal, March 1984

Aggregation dynamics, structure, and mechanical properties of bigels
journal, January 2014

A note on two problems in connexion with graphs
journal, December 1959

Testing mode-coupling theory for a supercooled binary Lennard-Jones mixture I: The van Hove correlation function
journal, May 1995

Structural Correlations and Mechanical Behavior in Nanophase Silica Glasses
journal, May 1999

Addressing Challenges of Identifying Geometrically Diverse Sets of Crystalline Porous Materials
journal, December 2011

Arrested phase separation in a short-ranged attractive colloidal system: A numerical study
journal, June 2005

Structure-property relationships in nanoporous metallic glasses
journal, March 2016

Atomistic process of plastic deformation in a model amorphous metal
journal, September 1981

Fast Parallel Algorithms for Short-Range Molecular Dynamics
journal, March 1995

Elastic constant- porosity relations for polycrystalline thoria
journal, January 1963

Intermittent dynamics and logarithmic domain growth during the spinodal decomposition of a glass-forming liquid
journal, April 2014

Effects of pores on shear bands in metallic glasses: A molecular dynamics study
journal, November 2010

Influence of the Glass Transition on the Liquid-Gas Spinodal Decomposition
journal, March 2011

Microstructural characteristics and elastic modulus of porous solids
journal, May 2015

Strain Localization and Percolation of Stable Structure in Amorphous Solids
journal, August 2005

Average stress in matrix and average elastic energy of materials with misfitting inclusions
journal, May 1973

The viscosity of suspensions of rigid spheres
journal, August 1952

Spreading plastic failure as a mechanism for the shear modulus reduction in amorphous solids
journal, May 2015

Numerical modeling of pore size and distribution in foamed titanium
journal, August 2006

Pore Size Distributions in Porous Glasses: A Computer Simulation Study
journal, January 1999

Algorithms and tools for high-throughput geometry-based analysis of crystalline porous materials
journal, February 2012

The determination of the elastic field of an ellipsoidal inclusion, and related problems
journal, August 1957

Nondestructive evaluation of elastic parameters of sintered iron powder compacts
journal, February 1990

Structural and Mechanical Properties of Nanoporous Silica
journal, December 2013

Microstructure and mechanical properties of sintered glass
journal, November 1990

Characterization of the structure and permeability of titanium foams for spinal fusion devices
journal, January 2009