DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Temperature‐dependency analysis and correction methods of in situ power‐loss estimation for crystalline silicon modules undergoing potential‐induced degradation stress testing

Abstract

Abstract We propose a method for in situ characterization of the photovoltaic module power at standard test conditions, using superposition of the dark current–voltage ( I–V ) curve measured at the elevated stress temperature, during potential‐induced degradation (PID) testing. PID chamber studies were performed on several crystalline silicon module designs to determine the extent to which the temperature dependency of maximum power is affected by the degradation of the modules. The results using the superposition principle show a mismatch between the power degradation measured at stress temperature and the degradation measured at 25 °C, dependent on module design, stress temperature, and level of degradation. We investigate the correction of this mismatch using two maximum‐power temperature translation methods found in the literature. For the first method, which is based on the maximum‐power temperature coefficient, we find that the temperature coefficient changes as the module degrades by PID, thus limiting its applicability. The second method investigated is founded on the two‐diode model, which allows for fundamental analysis of the degradation, but does not lend itself to large‐scale data collection and analysis. Last, we propose and validate experimentally a simpler and more accurate maximum‐power temperature translation method, by taking advantage of the near‐linear relationshipmore » between the mismatch and power degradation. This method reduces test duration and cost, avoids stress transients while ramping to and from the stress temperature, eliminates flash testing except at the initial and final data points, and enables significantly faster and more detailed acquisition of statistical data for future application of various statistical reliability models. Copyright © 2015 John Wiley & Sons, Ltd.« less

Authors:
ORCiD logo [1];  [2];  [1];  [3];  [1];  [1]
  1. Energy Technology Aalborg University Aalborg Denmark
  2. National Renewable Energy Laboratory Golden CO USA
  3. National Renewable Energy Laboratory Golden CO USA, Metallurgical and Materials Engineering Colorado School of Mines Golden CO USA
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
1400684
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Progress in Photovoltaics
Additional Journal Information:
Journal Name: Progress in Photovoltaics Journal Volume: 23 Journal Issue: 11; Journal ID: ISSN 1062-7995
Publisher:
Wiley Blackwell (John Wiley & Sons)
Country of Publication:
United Kingdom
Language:
English

Citation Formats

Spataru, Sergiu, Hacke, Peter, Sera, Dezso, Packard, Corinne, Kerekes, Tamas, and Teodorescu, Remus. Temperature‐dependency analysis and correction methods of in situ power‐loss estimation for crystalline silicon modules undergoing potential‐induced degradation stress testing. United Kingdom: N. p., 2015. Web. doi:10.1002/pip.2587.
Spataru, Sergiu, Hacke, Peter, Sera, Dezso, Packard, Corinne, Kerekes, Tamas, & Teodorescu, Remus. Temperature‐dependency analysis and correction methods of in situ power‐loss estimation for crystalline silicon modules undergoing potential‐induced degradation stress testing. United Kingdom. https://doi.org/10.1002/pip.2587
Spataru, Sergiu, Hacke, Peter, Sera, Dezso, Packard, Corinne, Kerekes, Tamas, and Teodorescu, Remus. Wed . "Temperature‐dependency analysis and correction methods of in situ power‐loss estimation for crystalline silicon modules undergoing potential‐induced degradation stress testing". United Kingdom. https://doi.org/10.1002/pip.2587.
@article{osti_1400684,
title = {Temperature‐dependency analysis and correction methods of in situ power‐loss estimation for crystalline silicon modules undergoing potential‐induced degradation stress testing},
author = {Spataru, Sergiu and Hacke, Peter and Sera, Dezso and Packard, Corinne and Kerekes, Tamas and Teodorescu, Remus},
abstractNote = {Abstract We propose a method for in situ characterization of the photovoltaic module power at standard test conditions, using superposition of the dark current–voltage ( I–V ) curve measured at the elevated stress temperature, during potential‐induced degradation (PID) testing. PID chamber studies were performed on several crystalline silicon module designs to determine the extent to which the temperature dependency of maximum power is affected by the degradation of the modules. The results using the superposition principle show a mismatch between the power degradation measured at stress temperature and the degradation measured at 25 °C, dependent on module design, stress temperature, and level of degradation. We investigate the correction of this mismatch using two maximum‐power temperature translation methods found in the literature. For the first method, which is based on the maximum‐power temperature coefficient, we find that the temperature coefficient changes as the module degrades by PID, thus limiting its applicability. The second method investigated is founded on the two‐diode model, which allows for fundamental analysis of the degradation, but does not lend itself to large‐scale data collection and analysis. Last, we propose and validate experimentally a simpler and more accurate maximum‐power temperature translation method, by taking advantage of the near‐linear relationship between the mismatch and power degradation. This method reduces test duration and cost, avoids stress transients while ramping to and from the stress temperature, eliminates flash testing except at the initial and final data points, and enables significantly faster and more detailed acquisition of statistical data for future application of various statistical reliability models. Copyright © 2015 John Wiley & Sons, Ltd.},
doi = {10.1002/pip.2587},
journal = {Progress in Photovoltaics},
number = 11,
volume = 23,
place = {United Kingdom},
year = {Wed Jan 21 00:00:00 EST 2015},
month = {Wed Jan 21 00:00:00 EST 2015}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
https://doi.org/10.1002/pip.2587

Citation Metrics:
Cited by: 36 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Estimation of the maximum power temperature coefficients of PV modules at different time scales
journal, January 2011

  • Ishii, Tetsuyuki; Otani, Kenji; Takashima, Takumi
  • Solar Energy Materials and Solar Cells, Vol. 95, Issue 1
  • DOI: 10.1016/j.solmat.2010.04.041

System voltage potential-induced degradation mechanisms in PV modules and methods for test
conference, June 2011

  • Hacke, Peter; Terwilliger, Kent; Smith, Ryan
  • 2011 37th IEEE Photovoltaic Specialists Conference (PVSC)
  • DOI: 10.1109/PVSC.2011.6186079

Spectral effects on PV-device rating
journal, August 1992


Theoretical temperature dependence of solar cell parameters
journal, April 1986


Potential Induced Degradation of solar cells and panels
conference, June 2010

  • Pingel, S.; Frank, O.; Winkler, M.
  • 2010 35th IEEE Photovoltaic Specialists Conference (PVSC)
  • DOI: 10.1109/PVSC.2010.5616823

Improvement and validation of a model for photovoltaic array performance
journal, January 2006


Investigation of the double exponential in the current—Voltage characteristics of silicon solar cells
journal, April 1977

  • Wolf, M.; Noel, G. T.; Stirn, R. J.
  • IEEE Transactions on Electron Devices, Vol. 24, Issue 4
  • DOI: 10.1109/T-ED.1977.18750

General temperature dependence of solar cell performance and implications for device modelling
journal, January 2003

  • Green, Martin A.
  • Progress in Photovoltaics: Research and Applications, Vol. 11, Issue 5
  • DOI: 10.1002/pip.496

Temperature dependence of I–V characteristics and performance parameters of silicon solar cell
journal, December 2008


Influence of Defects on Solar Cell Characteristics
journal, October 2009


Spatially resolved analysis and minimization of resistive losses in high-efficiency Si solar cells
journal, November 1996


Series resistance effects on solar cell measurements
journal, April 1963


Temperature dependence of solar cell performance—an analysis
journal, June 2012


An investigation of dark current and photocurrent superposition in photovoltaic devices
journal, March 1979


Effect of temperature on dark current characteristics of silicon solar cells and diodes
journal, January 2006

  • Radziemska, Ewa
  • International Journal of Energy Research, Vol. 30, Issue 2
  • DOI: 10.1002/er.1113

Testing and Analysis for Lifetime Prediction of Crystalline Silicon PV Modules Undergoing Degradation by System Voltage Stress
journal, January 2013


Departures from the principle of superposition in silicon solar cells
journal, December 1994

  • Robinson, S. J.; Aberle, A. G.; Green, M. A.
  • Journal of Applied Physics, Vol. 76, Issue 12
  • DOI: 10.1063/1.357902

Irradiance-dependence and translation of the I-V characteristics of crystalline silicon solar cells
conference, January 2000

  • Hishikawa, Y.; Imura, Y.; Oshiro, T.
  • 28th IEEE Photovoltaic Specialists Conference, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036)
  • DOI: 10.1109/PVSC.2000.916169

Recombination rate saturation mechanisms at oxidized surfaces of high‐efficiency silicon solar cells
journal, October 1995

  • Robinson, S. J.; Wenham, S. R.; Altermatt, P. P.
  • Journal of Applied Physics, Vol. 78, Issue 7
  • DOI: 10.1063/1.359821

A new method for accurate measurements of the lumped series resistance of solar cells
conference, January 1993

  • Aberle, A. G.; Wenham, S. R.; Green, M. A.
  • Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9)
  • DOI: 10.1109/PVSC.1993.347065

Development of a monitoring system for a PV solar plant
journal, September 2006


Temperature coefficients for PV modules and arrays: measurement methods, difficulties, and results
conference, January 1997

  • King, D. L.; Kratochvil, J. A.; Boyson, W. E.
  • Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997
  • DOI: 10.1109/PVSC.1997.654300

Development of a photovoltaic array model for use in power-electronics simulation studies
journal, January 1999

  • Gow, J. A.; Manning, C. D.
  • IEE Proceedings - Electric Power Applications, Vol. 146, Issue 2
  • DOI: 10.1049/ip-epa:19990116

Acceleration factor determination for potential-induced degradation in crystalline silicon PV modules
conference, April 2013

  • Hacke, P.; Smith, R.; Terwilliger, K.
  • 2013 IEEE International Reliability Physics Symposium (IRPS)
  • DOI: 10.1109/IRPS.2013.6532009

An experimental analysis of illumination intensity and temperature dependency of photovoltaic cell parameters
journal, November 2013


Dark current-voltage measurements on photovoltaic modules as a diagnostic or manufacturing tool
conference, January 1997

  • King, D. L.; Hansen, B. R.; Kratochvil, J. A.
  • Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997
  • DOI: 10.1109/PVSC.1997.654286

Temperature dependence of photovoltaic cells, modules and systems
conference, January 1996

  • Emery, K.; Burdick, J.; Caiyem, Y.
  • Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996
  • DOI: 10.1109/PVSC.1996.564365

Application of the superposition principle to solar-cell analysis
journal, March 1979

  • Lindholm, F. A.; Fossum, J. G.; Burgess, E. L.
  • IEEE Transactions on Electron Devices, Vol. 26, Issue 3
  • DOI: 10.1109/T-ED.1979.19400