Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing

Baumers, Martin; Duflou, Joost R.; Flanagan, William; Gutowski, Timothy G.; Kellens, Karel; Lifset, Reid

doi:10.1111/jiec.12668

Title: Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing

Authors:

^[1]; Duflou, Joost R. ^[2]; Flanagan, William ^[3]; Gutowski, Timothy G. ^[4];

^[2];

^[5]

Center for Additive Manufacturing, Faculty of Engineering University of Nottingham Nottingham United Kingdom
Life Cycle Engineering Research Group Department of Mechanical Engineering of the KU Leuven Leuven Belgium
Eco‐assessment Center of Excellence General Electric Company Albany NY USA
Environmentally Benign Manufacturing (EBM) research group, Laboratory for Manufacturing and Productivity and Mechanical Engineering Department Massachusetts Institute of Technology (MIT) Cambridge MA USA
Center for Industrial Ecology Yale School of Forestry &, Environmental Studies New Haven CT USA

Publication Date:: Fri Sep 29 00:00:00 EDT 2017

Sponsoring Org.:: USDOE

OSTI Identifier:: 1395598

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Industrial Ecology

Additional Journal Information:: Journal Name: Journal of Industrial Ecology Journal Volume: 21 Journal Issue: S1; Journal ID: ISSN 1088-1980

Publisher:: Wiley-Blackwell

Country of Publication:: United States

Language:: English

Citation Formats


                    Baumers, Martin, Duflou, Joost R., Flanagan, William, Gutowski, Timothy G., Kellens, Karel, and Lifset, Reid. Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing.  United States: N. p., 2017. 
Web.  doi:10.1111/jiec.12668.

Copy to clipboard


                    Baumers, Martin, Duflou, Joost R., Flanagan, William, Gutowski, Timothy G., Kellens, Karel, & Lifset, Reid. Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing.  United States.  https://doi.org/10.1111/jiec.12668

Copy to clipboard


                    Baumers, Martin, Duflou, Joost R., Flanagan, William, Gutowski, Timothy G., Kellens, Karel, and Lifset, Reid. Fri .  
"Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing".  United States.  https://doi.org/10.1111/jiec.12668.

Copy to clipboard


                    
@article{osti_1395598,

  title        = {Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing},

  author       = {Baumers, Martin and Duflou, Joost R. and Flanagan, William and Gutowski, Timothy G. and Kellens, Karel and Lifset, Reid},

  abstractNote = {},

  doi          = {10.1111/jiec.12668},

  journal      = {Journal of Industrial Ecology},

  number       = S1,

  volume       = 21,

  place        = {United States},

  year         = {Fri Sep 29 00:00:00 EDT 2017},

  month        = {Fri Sep 29 00:00:00 EDT 2017}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1111/jiec.12668

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 27 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Industrial and Consumer Uses of Additive Manufacturing: A Discussion of Capabilities, Trajectories, and Challenges: Industrial and Consumer Uses of Additive Manufacturing
journal, June 2017

Quinlan, Haden Edward; Hasan, Talha; Jaddou, John
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12609

Rapid manufacturing: impact on supply chain methodologies and practice
journal, January 2007

Tuck, Christopher; Hague, Richard; Burns, Neil
International Journal of Services and Operations Management, Vol. 3, Issue 1
DOI: 10.1504/IJSOM.2007.011459

Rapid manufacturing facilitated customization
journal, April 2008

Tuck, C. J.; Hague, R. J. M.; Ruffo, M.
International Journal of Computer Integrated Manufacturing, Vol. 21, Issue 3
DOI: 10.1080/09511920701216238

Additive Manufacturing in Operations and Supply Chain Management: No Sustainability Benefit or Virtuous Knock-On Opportunities?: Additive Manufacturing in Operations and Supply Chain Management
journal, May 2017

Holmström, Jan; Gutowski, Timothy
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12580

Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment
journal, July 2010

Holmström, Jan; Partanen, Jouni; Tuomi, Jukka
Journal of Manufacturing Technology Management, Vol. 21, Issue 6
DOI: 10.1108/17410381011063996

Design and Performance Assessment of Innovative Eco-Efficient Support Structures for Additive Manufacturing by Photopolymerization: Eco-Efficient Supports for Additive Manufacturing
journal, September 2017

Díaz Lantada, Andrés; de Blas Romero, Adrián; Sánchez Isasi, Álvaro
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12660

Additive manufacturing in the spare parts supply chain
journal, January 2014

Khajavi, Siavash H.; Partanen, Jouni; Holmström, Jan
Computers in Industry, Vol. 65, Issue 1
DOI: 10.1016/j.compind.2013.07.008

Evaluating Eco-Efficiency of 3D Printing in the Aeronautic Industry: 3D Printing in Aeronautics through Eco-Efficiency
journal, October 2017

Mami, Fares; Revéret, Jean-Pierre; Fallaha, Sophie
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12693

Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?: Shape Complexity and Energy Usage in 3D Printing
journal, January 2016

Baumers, Martin; Tuck, Chris; Wildman, Ricky
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12397

Addressing Hazardous Implications of Additive Manufacturing: Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts: Hazard Implications of 3D Printing Materials
journal, May 2017

Bours, Justin; Adzima, Brian; Gladwin, Susan
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12587

Note on the Rate and Energy Efficiency Limits for Additive Manufacturing: Rate and Energy Efficiency Limits for AM
journal, October 2017

Gutowski, Timothy; Jiang, Sheng; Cooper, Daniel
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12664

Evaluating Measuring Techniques for Occupational Exposure during Additive Manufacturing of Metals: A Pilot Study: Measuring Occupational Exposure During Additive Manufacturing of Metals
journal, October 2016

Graff, Pål; Ståhlbom, Bengt; Nordenberg, Eva
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12498

Environmental and Economic Implications of Distributed Additive Manufacturing: The Case of Injection Mold Tooling: Environmental Implications of Additive Manufacturing
journal, August 2017

Huang, Runze; Riddle, Matthew E.; Graziano, Diane
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12641

Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies: 3D Printer Emissions-Exposure and Control
journal, April 2017

Azimi, Parham; Fazli, Torkan; Stephens, Brent
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12578

Influence of Material-Related Aspects of Additive and Subtractive Ti-6Al-4V Manufacturing on Energy Demand and Carbon Dioxide Emissions: Material-Related Aspects of Additive and Subtractive Manufacturing
journal, December 2016

Priarone, Paolo C.; Ingarao, Giuseppe; di Lorenzo, Rosa
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12523

Energy Consumption Modeling of Stereolithography-Based Additive Manufacturing Toward Environmental Sustainability: Energy Consumption of SLA-Based AM
journal, May 2017

Yang, Yiran; Li, Lin; Pan, Yayue
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12589

Characterization of Emissions from a Desktop 3D Printer: Characterization of Emissions from a 3D Printer
journal, March 2017

Mendes, Luís; Kangas, Anneli; Kukko, Kirsi
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12569

Additive manufacturing and its societal impact: a literature review
journal, October 2012

Huang, Samuel H.; Liu, Peng; Mokasdar, Abhiram
The International Journal of Advanced Manufacturing Technology, Vol. 67, Issue 5-8
DOI: 10.1007/s00170-012-4558-5

Comparative Energy, Resource and Recycling Lifecycle Analysis of the Industrial Repair Process of Gas Turbine Burners Using Conventional Machining and Additive Manufacturing: Additive Manufacturing Repair LCA study
journal, July 2017

Walachowicz, Frank; Bernsdorf, Ingo; Papenfuss, Ulrike
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12637

Book Review of Handbook of Sustainability in Additive Manufacturing, edited by Subramanian Muthu and Monica Savalani. Springer Singapore, 2016, 168 pp., ISBN 978-981-10-0547-3, hardcover, $119.00, ebook, $89.00 and 3D Printing Will Rock the World, by John: Reviews
journal, July 2017

Garmulewicz, Alysia
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12617

Toward a Sustainable Impeller Production: Environmental Impact Comparison of Different Impeller Manufacturing Methods: Environmental Comparison of Impeller Manufacturing
journal, July 2017

Peng, Shitong; Li, Tao; Wang, Xinlin
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12628

Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?: Environmental Impacts of Selective Laser Melting
journal, December 2016

Faludi, Jeremy; Baumers, Martin; Maskery, Ian
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12528

Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System: LCA-Distributed Manufacturing System
journal, June 2017

Cerdas, Felipe; Juraschek, Max; Thiede, Sebastian
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12618

Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications: Environmental Dimensions of Additive Manufacturing
journal, August 2017

Kellens, Karel; Baumers, Martin; Gutowski, Timothy G.
Journal of Industrial Ecology, Vol. 21, Issue S1
DOI: 10.1111/jiec.12629

Similar Records in DOE PAGES and OSTI.GOV collections:

On the additive manufacturing (3D printing) of viscoelastic materials and flow behavior: From composites to food manufacturing

Journal Article Siacor, Francis C. ; Chen, Qiyi ; Zhao, Jia Yu ; ... - Additive Manufacturing

Additive manufacturing (AM) or more commonly known as 3D-printing has gained much ground in industrial manufacturing because of its breakthrough in rapid prototyping and processes. To date, the 3D-printing market has grown significantly and is poised for growth in line with digitization of manufacturing. Furthermore, the main objective of this review article focuses on the viscoelastic behavior (viscous solution) of 3D printing materials at ambient conditions, which are not essentially under melt-flow or higher temperatures. The initial section reviews the basic concepts on viscosity and viscoelastic phenomenon, with emphasis on the preferred conditions a viscous material should have prior tomore »« less
https://doi.org/10.1016/j.addma.2021.102043

Full Text Available
Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

Conference New, Joshua Ryan

Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: Thismore »« less
Hydrogen trapping in 3D-printed (additive manufactured) Ti-6Al-4V

Journal Article Silverstein, Ravit ; Eliezer, Dan - Materials Characterization

Highlights: • The AM process influence hydrogen trapping and desorption behavior. • Susceptibility to hydrogen embrittlement significantly depends on the printing direction. • Hydrogen desorption in SLM Ti-6Al-4V is designated to dislocations and Ti-hydride phase. - Abstract: Hydrogen trapping state and desorption behavior in 3D printed-Ti-6Al-4V, designed using additive manufacturing (AM), have been investigated. The AM process in this work is selective laser melting (SLM) by which components are built using melting powder's layers with a laser beam. During this process, hydrogen can meet with Ti, leading to a catastrophically failure known as hydrogen embrittlement. The effect of hydrogen onmore »« less
https://doi.org/10.1016/J.MATCHAR.2018.07.029
Progress Summary: 17-Month Compression Set and Load Retention of Thermally Accelerated Aged Siloxane Specimens (Additively Manufactured by the Direct-Ink-Write (DIW) 3D Printing Technique) was Measured

Technical Report Small, W. ; Bryson, T. M. ; Maiti, A.

Accelerated aging of polymeric materials is needed to predict their long-term mechanical functionality. Two key metrics used to evaluate their performance are compression set and load retention. A baseline (time = 0) mechanical assessment was done prior to initiating the accelerated aging process to acquire initial thickness and load values for future calculation of compression set and load retention.
https://doi.org/10.2172/1499967

Full Text Available
Progress Summary: 12-Month Compression Set and Load Retention of Thermally Accelerated Aged Siloxane Specimens (Additively Manufactured by the Direct-Ink-Write (DIW) 3D Printing Technique) Was Measured

Technical Report Small, W. ; Bryson, T. M. ; Maiti, A.

Motivation: Accelerated aging of polymeric materials is needed to predict their long-term mechanical functionality. Two key metrics used to evaluate their performance are compression set and load retention. A baseline(time=0)mechanical assessment was done prior to initiating the accelerated aging process to acquire initial thickness and load values for future calculation of compression set and load retention.Specimens are beingaged under compressive strain (13%for the current studies) at four different temperatures (25, 40, 55, and 70°C) for at least 1 year; compression set and load retention will be measured at various timepoints. Time-temperature superposition (TTS) will be applied to the isothermal datamore »« less
https://doi.org/10.2172/1481073

Full Text Available

Similar Records

Title: Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing

Citation Formats

Industrial and Consumer Uses of Additive Manufacturing: A Discussion of Capabilities, Trajectories, and Challenges: Industrial and Consumer Uses of Additive Manufacturing journal, June 2017

Rapid manufacturing: impact on supply chain methodologies and practice journal, January 2007

Rapid manufacturing facilitated customization journal, April 2008

Additive Manufacturing in Operations and Supply Chain Management: No Sustainability Benefit or Virtuous Knock-On Opportunities?: Additive Manufacturing in Operations and Supply Chain Management journal, May 2017

Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment journal, July 2010

Design and Performance Assessment of Innovative Eco-Efficient Support Structures for Additive Manufacturing by Photopolymerization: Eco-Efficient Supports for Additive Manufacturing journal, September 2017

Additive manufacturing in the spare parts supply chain journal, January 2014

Evaluating Eco-Efficiency of 3D Printing in the Aeronautic Industry: 3D Printing in Aeronautics through Eco-Efficiency journal, October 2017

Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?: Shape Complexity and Energy Usage in 3D Printing journal, January 2016

Addressing Hazardous Implications of Additive Manufacturing: Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts: Hazard Implications of 3D Printing Materials journal, May 2017

Note on the Rate and Energy Efficiency Limits for Additive Manufacturing: Rate and Energy Efficiency Limits for AM journal, October 2017

Evaluating Measuring Techniques for Occupational Exposure during Additive Manufacturing of Metals: A Pilot Study: Measuring Occupational Exposure During Additive Manufacturing of Metals journal, October 2016

Environmental and Economic Implications of Distributed Additive Manufacturing: The Case of Injection Mold Tooling: Environmental Implications of Additive Manufacturing journal, August 2017

Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies: 3D Printer Emissions-Exposure and Control journal, April 2017

Influence of Material-Related Aspects of Additive and Subtractive Ti-6Al-4V Manufacturing on Energy Demand and Carbon Dioxide Emissions: Material-Related Aspects of Additive and Subtractive Manufacturing journal, December 2016

Energy Consumption Modeling of Stereolithography-Based Additive Manufacturing Toward Environmental Sustainability: Energy Consumption of SLA-Based AM journal, May 2017

Characterization of Emissions from a Desktop 3D Printer: Characterization of Emissions from a 3D Printer journal, March 2017

Additive manufacturing and its societal impact: a literature review journal, October 2012

Comparative Energy, Resource and Recycling Lifecycle Analysis of the Industrial Repair Process of Gas Turbine Burners Using Conventional Machining and Additive Manufacturing: Additive Manufacturing Repair LCA study journal, July 2017

Book Review of Handbook of Sustainability in Additive Manufacturing, edited by Subramanian Muthu and Monica Savalani. Springer Singapore, 2016, 168 pp., ISBN 978-981-10-0547-3, hardcover, $119.00, ebook, $89.00 and 3D Printing Will Rock the World, by John: Reviews journal, July 2017

Toward a Sustainable Impeller Production: Environmental Impact Comparison of Different Impeller Manufacturing Methods: Environmental Comparison of Impeller Manufacturing journal, July 2017

Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?: Environmental Impacts of Selective Laser Melting journal, December 2016

Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System: LCA-Distributed Manufacturing System journal, June 2017

Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications: Environmental Dimensions of Additive Manufacturing journal, August 2017

Industrial and Consumer Uses of Additive Manufacturing: A Discussion of Capabilities, Trajectories, and Challenges: Industrial and Consumer Uses of Additive Manufacturing
journal, June 2017

Rapid manufacturing: impact on supply chain methodologies and practice
journal, January 2007

Rapid manufacturing facilitated customization
journal, April 2008

Additive Manufacturing in Operations and Supply Chain Management: No Sustainability Benefit or Virtuous Knock-On Opportunities?: Additive Manufacturing in Operations and Supply Chain Management
journal, May 2017

Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment
journal, July 2010

Design and Performance Assessment of Innovative Eco-Efficient Support Structures for Additive Manufacturing by Photopolymerization: Eco-Efficient Supports for Additive Manufacturing
journal, September 2017

Additive manufacturing in the spare parts supply chain
journal, January 2014

Evaluating Eco-Efficiency of 3D Printing in the Aeronautic Industry: 3D Printing in Aeronautics through Eco-Efficiency
journal, October 2017

Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?: Shape Complexity and Energy Usage in 3D Printing
journal, January 2016

Addressing Hazardous Implications of Additive Manufacturing: Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts: Hazard Implications of 3D Printing Materials
journal, May 2017

Note on the Rate and Energy Efficiency Limits for Additive Manufacturing: Rate and Energy Efficiency Limits for AM
journal, October 2017

Evaluating Measuring Techniques for Occupational Exposure during Additive Manufacturing of Metals: A Pilot Study: Measuring Occupational Exposure During Additive Manufacturing of Metals
journal, October 2016

Environmental and Economic Implications of Distributed Additive Manufacturing: The Case of Injection Mold Tooling: Environmental Implications of Additive Manufacturing
journal, August 2017

Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies: 3D Printer Emissions-Exposure and Control
journal, April 2017

Influence of Material-Related Aspects of Additive and Subtractive Ti-6Al-4V Manufacturing on Energy Demand and Carbon Dioxide Emissions: Material-Related Aspects of Additive and Subtractive Manufacturing
journal, December 2016

Energy Consumption Modeling of Stereolithography-Based Additive Manufacturing Toward Environmental Sustainability: Energy Consumption of SLA-Based AM
journal, May 2017

Characterization of Emissions from a Desktop 3D Printer: Characterization of Emissions from a 3D Printer
journal, March 2017

Additive manufacturing and its societal impact: a literature review
journal, October 2012

Comparative Energy, Resource and Recycling Lifecycle Analysis of the Industrial Repair Process of Gas Turbine Burners Using Conventional Machining and Additive Manufacturing: Additive Manufacturing Repair LCA study
journal, July 2017

Book Review of Handbook of Sustainability in Additive Manufacturing, edited by Subramanian Muthu and Monica Savalani. Springer Singapore, 2016, 168 pp., ISBN 978-981-10-0547-3, hardcover, $119.00, ebook, $89.00 and 3D Printing Will Rock the World, by John: Reviews
journal, July 2017

Toward a Sustainable Impeller Production: Environmental Impact Comparison of Different Impeller Manufacturing Methods: Environmental Comparison of Impeller Manufacturing
journal, July 2017

Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?: Environmental Impacts of Selective Laser Melting
journal, December 2016

Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System: LCA-Distributed Manufacturing System
journal, June 2017

Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications: Environmental Dimensions of Additive Manufacturing
journal, August 2017