Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature
Abstract
The cryogenic plastic deformation of CrCoFeMnNi high entropy alloy is characterized by three distinct stages based on the change of the work hardening rate. Microstructure and bulk texture at different strain levels were studied by electron backscatter diffraction (EBSD) and neutron diffraction. Our findings indicate that the deformation twins led to the constant work hardening rate at Stage II and resulted in the appearance of <115 >//TA texture component, while the dislocation slip was involved all though the entire plastic deformation. As a result, the twinning-mediated tensile plastic deformation at cryogenic temperature finally induced the strong {111}- < 112 > texture component and minor {001} < 110 > texture component accompanied with twinning-induced {115}< 552 > texture component.
- Authors:
-
- Univ. of Tennessee, Knoxville, TN (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1376389
- Alternate Identifier(s):
- OSTI ID: 1550173
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Materials & Design
- Additional Journal Information:
- Journal Volume: 131; Journal Issue: C; Journal ID: ISSN 0264-1275
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; HEA; twinning-mediated deformation; work hardening; texture; neutron diffraction
Citation Formats
Liu, T. K., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y. F., Bei, H., and An, Ke. Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature. United States: N. p., 2017.
Web. doi:10.1016/j.matdes.2017.06.039.
Liu, T. K., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y. F., Bei, H., & An, Ke. Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature. United States. https://doi.org/10.1016/j.matdes.2017.06.039
Liu, T. K., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y. F., Bei, H., and An, Ke. Sat .
"Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature". United States. https://doi.org/10.1016/j.matdes.2017.06.039. https://www.osti.gov/servlets/purl/1376389.
@article{osti_1376389,
title = {Twinning-mediated work hardening and texture evolution in CrCoFeMnNi high entropy alloys at cryogenic temperature},
author = {Liu, T. K. and Wu, Z. and Stoica, A. D. and Xie, Q. and Wu, W. and Gao, Y. F. and Bei, H. and An, Ke},
abstractNote = {The cryogenic plastic deformation of CrCoFeMnNi high entropy alloy is characterized by three distinct stages based on the change of the work hardening rate. Microstructure and bulk texture at different strain levels were studied by electron backscatter diffraction (EBSD) and neutron diffraction. Our findings indicate that the deformation twins led to the constant work hardening rate at Stage II and resulted in the appearance of <115 >//TA texture component, while the dislocation slip was involved all though the entire plastic deformation. As a result, the twinning-mediated tensile plastic deformation at cryogenic temperature finally induced the strong {111}- < 112 > texture component and minor {001} < 110 > texture component accompanied with twinning-induced {115}< 552 > texture component.},
doi = {10.1016/j.matdes.2017.06.039},
journal = {Materials & Design},
number = C,
volume = 131,
place = {United States},
year = {Sat Jun 17 00:00:00 EDT 2017},
month = {Sat Jun 17 00:00:00 EDT 2017}
}
Web of Science
Works referenced in this record:
Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes
journal, May 2004
- Yeh, J.-W.; Chen, S.-K.; Lin, S.-J.
- Advanced Engineering Materials, Vol. 6, Issue 5, p. 299-303
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
journal, May 2005
- Tong, Chung-Jin; Chen, Min-Rui; Yeh, Jien-Wei
- Metallurgical and Materials Transactions A, Vol. 36, Issue 5
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
journal, September 2012
- Hemphill, M. A.; Yuan, T.; Wang, G. Y.
- Acta Materialia, Vol. 60, Issue 16
High-Entropy Alloys in Hexagonal Close-Packed Structure
journal, August 2015
- Gao, M. C.; Zhang, B.; Guo, S. M.
- Metallurgical and Materials Transactions A, Vol. 47, Issue 7
A hexagonal close-packed high-entropy alloy: The effect of entropy
journal, April 2016
- Zhao, Y. J.; Qiao, J. W.; Ma, S. G.
- Materials & Design, Vol. 96
Alloy Design and Properties Optimization of High-Entropy Alloys
journal, July 2012
- Zhang, Y.; Yang, X.; Liaw, P. K.
- JOM, Vol. 64, Issue 7
Enhancing pitting corrosion resistance of AlxCrFe1.5MnNi0.5 high-entropy alloys by anodic treatment in sulfuric acid
journal, December 2008
- Lee, C. P.; Chen, Y. Y.; Hsu, C. Y.
- Thin Solid Films, Vol. 517, Issue 3
Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr18 FCC solid solution alloy
journal, July 2015
- Wu, Z.; Bei, H.
- Materials Science and Engineering: A, Vol. 640
Alloying effect on the elastic properties of refractory high-entropy alloys
journal, January 2017
- Tian, Li-Yun; Wang, Guisheng; Harris, Joshua S.
- Materials & Design, Vol. 114
Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys
journal, November 2016
- Zhang, Chuan; Zhang, Fan; Diao, Haoyan
- Materials & Design, Vol. 109
High-entropy alloys: a critical assessment of their founding principles and future prospects
journal, April 2016
- Pickering, E. J.; Jones, N. G.
- International Materials Reviews, Vol. 61, Issue 3
Microstructures and properties of high-entropy alloys
journal, April 2014
- Zhang, Yong; Zuo, Ting Ting; Tang, Zhi
- Progress in Materials Science, Vol. 61
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
journal, April 2007
- Zhou, Y. J.; Zhang, Y.; Wang, Y. L.
- Applied Physics Letters, Vol. 90, Issue 18
Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys
journal, November 2016
- Wu, Zhenggang; Gao, Yanfei; Bei, Hongbin
- Acta Materialia, Vol. 120
Tensile properties of high- and medium-entropy alloys
journal, August 2013
- Gali, A.; George, E. P.
- Intermetallics, Vol. 39
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
journal, December 2014
- Wu, Z.; Bei, H.; Pharr, G. M.
- Acta Materialia, Vol. 81
A fracture-resistant high-entropy alloy for cryogenic applications
journal, September 2014
- Gludovatz, B.; Hohenwarter, A.; Catoor, D.
- Science, Vol. 345, Issue 6201
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
journal, September 2013
- Otto, F.; Dlouhý, A.; Somsen, Ch.
- Acta Materialia, Vol. 61, Issue 15
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
journal, November 2015
- Huang, Shuo; Li, Wei; Lu, Song
- Scripta Materialia, Vol. 108
Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys
journal, October 2015
- Wu, Z.; Parish, C. M.; Bei, H.
- Journal of Alloys and Compounds, Vol. 647
Dislocation Mean Free Paths and Strain Hardening of Crystals
journal, June 2008
- Devincre, B.; Hoc, T.; Kubin, L.
- Science, Vol. 320, Issue 5884
Physics and phenomenology of strain hardening: the FCC case
journal, January 2003
- Kocks, U. F.; Mecking, H.
- Progress in Materials Science, Vol. 48, Issue 3
A dislocation-based model for all hardening stages in large strain deformation
journal, September 1998
- Estrin, Y.; Tóth, L. S.; Molinari, A.
- Acta Materialia, Vol. 46, Issue 15
Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins
journal, September 1997
- Asgari, Sirous; El-Danaf, Ehab; Kalidindi, Surya R.
- Metallurgical and Materials Transactions A, Vol. 28, Issue 9
The dependence of polycrystal work hardening on grain size
journal, July 1973
- Thompson, Anthony W.; Baskes, Michael I.; Flanagan, William F.
- Acta Metallurgica, Vol. 21, Issue 7
Kinetics of f.c.c. deformation twinning and its relationship to stress-strain behaviour
journal, March 1978
- Remy, L.
- Acta Metallurgica, Vol. 26, Issue 3
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
journal, October 2016
- Laplanche, G.; Kostka, A.; Horst, O. M.
- Acta Materialia, Vol. 118
Texture generation and implications in TWIP steels
journal, June 2012
- Bracke, Lieven; Verbeken, Kim; Kestens, Leo A. I.
- Scripta Materialia, Vol. 66, Issue 12
Intra- and intergranular heterogeneities in the plastic deformation of brass during rolling
journal, October 1990
- Leffers, T.; Bilde-Sørensen, J. B.
- Acta Metallurgica et Materialia, Vol. 38, Issue 10
The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy
journal, December 2016
- Sathiaraj, G. D.; Tsai, C. W.; Yeh, J. W.
- Journal of Alloys and Compounds, Vol. 688
Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy
journal, February 2016
- Sathiaraj, G. Dan; Bhattacharjee, P. P.; Tsai, Che-Wei
- Intermetallics, Vol. 69
A study of stress-induced phase transformation and micromechanical behavior of CuZr-based alloy by in-situ neutron diffraction
journal, March 2017
- Wang, Dongmei; Mu, Juan; Chen, Yan
- Journal of Alloys and Compounds, Vol. 696
In-situ TOF neutron diffraction studies of cyclic softening in superelasticity of a NiFeGaCo shape memory alloy
journal, January 2017
- Yang, H.; Yu, D.; Chen, Y.
- Materials Science and Engineering: A, Vol. 680
Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction
journal, February 2015
- Wu, Wei; Liaw, Peter K.; An, Ke
- Acta Materialia, Vol. 85
A study of lattice elasticity from low entropy metals to medium and high entropy alloys
journal, May 2015
- Huang, E-Wen; Yu, Dunji; Yeh, Jien-Wei
- Scripta Materialia, Vol. 101
Deformation mechanisms in a precipitation-strengthened ferritic superalloy revealed by in situ neutron diffraction studies at elevated temperatures
journal, January 2015
- Huang, Shenyan; Gao, Yanfei; An, Ke
- Acta Materialia, Vol. 83
Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime
journal, April 2013
- Benafan, O.; Noebe, R. D.; Padula, S. A.
- Scripta Materialia, Vol. 68, Issue 8
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
journal, March 2014
- Wu, Z.; Bei, H.; Otto, F.
- Intermetallics, Vol. 46
First In Situ Lattice Strains Measurements Under Load at VULCAN
journal, October 2010
- An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D.
- Metallurgical and Materials Transactions A, Vol. 42, Issue 1
Extracting grain-orientation-dependent data from in situ time-of-flight neutron diffraction. I. Inverse pole figures
journal, November 2014
- Stoica, G. M.; Stoica, A. D.; An, K.
- Journal of Applied Crystallography, Vol. 47, Issue 6
Dependence of deformation twinning on grain orientation in a high manganese steel
journal, October 2006
- Yang, P.; Xie, Q.; Meng, L.
- Scripta Materialia, Vol. 55, Issue 7
Deformation twinning
journal, January 1995
- Christian, J. W.; Mahajan, S.
- Progress in Materials Science, Vol. 39, Issue 1-2
In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel
journal, August 2017
- Xie, Q.; Liang, J.; Stoica, A. D.
- Scripta Materialia, Vol. 137
The effect of dislocation contrast on x‐ray line broadening: A new approach to line profile analysis
journal, November 1996
- Ungár, T.; Borbély, A.
- Applied Physics Letters, Vol. 69, Issue 21
Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals
journal, May 2001
- Ungár, T.; Gubicza, J.; Ribárik, G.
- Journal of Applied Crystallography, Vol. 34, Issue 3
In situ neutron diffraction analysis of grain structure during friction stir processing of an aluminum alloy
journal, October 2012
- Woo, W.; Feng, Z.; Wang, X. -L.
- Materials Letters, Vol. 85
Inter- and intragranular stresses in cyclically-deformed 316 stainless steel
journal, June 2005
- Wang, X. -L.; Wang, Y. D.; Stoica, A. D.
- Materials Science and Engineering: A, Vol. 399, Issue 1-2
On the origin of deformation microstructures in austenitic stainless steel: part I—microstructures
journal, September 2001
- Lee, E. H.; Byun, T. S.; Hunn, J. D.
- Acta Materialia, Vol. 49, Issue 16
Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
journal, March 2008
- Bouaziz, O.; Allain, S.; Scott, C.
- Scripta Materialia, Vol. 58, Issue 6
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
journal, September 2011
- Gutierrez-Urrutia, I.; Raabe, D.
- Acta Materialia, Vol. 59, Issue 16
Works referencing / citing this record:
Bending Behavior of a Wrought Magnesium Alloy Investigated by the In Situ Pinhole Neutron Diffraction Method
journal, August 2018
- Wu, Wei; Stoica, Alexandru; Yu, Dunji
- Crystals, Vol. 8, Issue 9
Cryogenic Treatment of CoCrFeMnNi(NbC) High-Entropy Alloys
journal, November 2019
- Abbasi, Erfan; Dehghani, Kamran
- Journal of Materials Engineering and Performance, Vol. 28, Issue 11
Gradient Distribution of Microstructures and Mechanical Properties in a FeCoCrNiMo High-Entropy Alloy during Spark Plasma Sintering
journal, March 2019
- Zhang, Mingyang; Peng, Yingbo; Zhang, Wei
- Metals, Vol. 9, Issue 3
High-Entropy Alloys: Potential Candidates for High-Temperature Applications - An Overview
journal, October 2017
- Praveen, Sathiyamoorthi; Kim, Hyoung Seop
- Advanced Engineering Materials, Vol. 20, Issue 1
Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction
journal, September 2018
- Fu, S.; Bei, H.; Chen, Y.
- Materials Research Letters, Vol. 6, Issue 11
Deformation mechanisms and work-hardening behavior of transformation-induced plasticity high entropy alloys by in -situ neutron diffraction
text, January 2018
- Fu, S.; Bei, H.; Chen, Y.
- Taylor & Francis