Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability

Miller, Victoria M.; Berman, Tracy D.; Beyerlein, Irene J.; Jones, J. Wayne; Pollock, Tresa M.

doi:10.1016/j.msea.2016.08.063

Title: Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability

Authors:: Miller, Victoria M.; Berman, Tracy D.; Beyerlein, Irene J.; Jones, J. Wayne; Pollock, Tresa M.

Publication Date:: Sat Oct 01 00:00:00 EDT 2016

Sponsoring Org.:: USDOE

OSTI Identifier:: 1359589

Grant/Contract Number:: 20140348ER

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Additional Journal Information:: Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Volume: 675 Journal Issue: C; Journal ID: ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Miller, Victoria M., Berman, Tracy D., Beyerlein, Irene J., Jones, J. Wayne, and Pollock, Tresa M. Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability.  Netherlands: N. p., 2016. 
Web.  doi:10.1016/j.msea.2016.08.063.

Copy to clipboard


                    Miller, Victoria M., Berman, Tracy D., Beyerlein, Irene J., Jones, J. Wayne, & Pollock, Tresa M. Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability.  Netherlands.  https://doi.org/10.1016/j.msea.2016.08.063

Copy to clipboard


                    Miller, Victoria M., Berman, Tracy D., Beyerlein, Irene J., Jones, J. Wayne, and Pollock, Tresa M. Sat .  
"Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability".  Netherlands.  https://doi.org/10.1016/j.msea.2016.08.063.

Copy to clipboard


                    
@article{osti_1359589,

  title        = {Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability},

  author       = {Miller, Victoria M. and Berman, Tracy D. and Beyerlein, Irene J. and Jones, J. Wayne and Pollock, Tresa M.},

  abstractNote = {},

  doi          = {10.1016/j.msea.2016.08.063},

  journal      = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},

  number       = C,

  volume       = 675,

  place        = {Netherlands},

  year         = {Sat Oct 01 00:00:00 EDT 2016},

  month        = {Sat Oct 01 00:00:00 EDT 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.msea.2016.08.063

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 32 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Numerical modeling of formability of extruded magnesium alloy tubes
journal, January 2010

Lévesque, J.; Inal, K.; Neale, K. W.
International Journal of Plasticity, Vol. 26, Issue 1
DOI: 10.1016/j.ijplas.2009.05.001

Enhanced ductility in strongly textured magnesium produced by equal channel angular processing
journal, February 2004

Agnew, S. R.; Horton, J. A.; Lillo, T. M.
Scripta Materialia, Vol. 50, Issue 3
DOI: 10.1016/j.scriptamat.2003.10.006

Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation
journal, February 2012

Li, X.; Jiao, F.; Al-Samman, T.
Scripta Materialia, Vol. 66, Issue 3-4
DOI: 10.1016/j.scriptamat.2011.10.028

Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature
journal, October 2009

Kang, D. H.; Kim, D. -W.; Kim, S.
Scripta Materialia, Vol. 61, Issue 7
DOI: 10.1016/j.scriptamat.2009.06.026

Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature
journal, July 2011

Li, Jizhong; Xu, Wei; Wu, Xiaolin
Materials Science and Engineering: A, Vol. 528, Issue 18
DOI: 10.1016/j.msea.2011.04.045

Study of a drawing-quality sheet steel. II: Forming-limit curves by experiments and micromechanical simulations
journal, August 2010

Charca Ramos, G.; Stout, M.; Bolmaro, R. E.
International Journal of Solids and Structures, Vol. 47, Issue 17
DOI: 10.1016/j.ijsolstr.2010.04.022

Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass
journal, July 2011

Huang, Xinsheng; Suzuki, Kazutaka; Chino, Yasumasa
Journal of Alloys and Compounds, Vol. 509, Issue 28
DOI: 10.1016/j.jallcom.2011.04.132

Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy
journal, May 2015

Dogan, E.; Vaughan, M. W.; Wang, S. J.
Acta Materialia, Vol. 89
DOI: 10.1016/j.actamat.2014.12.006

On modeling anisotropy in deformation processes involving textured polycrystals with distorted grain shape
journal, December 1990

Mathur, Kapil K.; Dawson, Paul R.; Kocks, U. F.
Mechanics of Materials, Vol. 10, Issue 3
DOI: 10.1016/0167-6636(90)90042-E

Influence of texture on Hall–Petch relationships in an Mg alloy
journal, December 2014

Wang, Yi; Choo, Hahn
Acta Materialia, Vol. 81
DOI: 10.1016/j.actamat.2014.08.023

Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling
journal, February 2009

Huang, Xinsheng; Suzuki, Kazutaka; Watazu, Akira
Journal of Alloys and Compounds, Vol. 470, Issue 1-2
DOI: 10.1016/j.jallcom.2008.02.029

Texture enhancement during grain growth of magnesium alloy AZ31B
journal, March 2015

Bhattacharyya, J. J.; Agnew, S. R.; Muralidharan, G.
Acta Materialia, Vol. 86
DOI: 10.1016/j.actamat.2014.12.009

Formability analysis of extra-deep drawing steel
journal, December 2002

Ravi Kumar, D.
Journal of Materials Processing Technology, Vol. 130-131
DOI: 10.1016/S0924-0136(02)00789-6

Macroscopic anisotropy in AA5019A sheets
journal, May 2000

Choi, S. -H; Brem, J. C.; Barlat, F.
Acta Materialia, Vol. 48, Issue 8
DOI: 10.1016/S1359-6454(99)00470-X

Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys
journal, October 2011

Hadorn, Jason P.; Hantzsche, Kerstin; Yi, Sangbong
Metallurgical and Materials Transactions A, Vol. 43, Issue 4
DOI: 10.1007/s11661-011-0923-5

Solid solution strengthening of magnesium single crystals—ii the effect of solute on the ease of prismatic slip
journal, November 1969

Akhtar, A.; Teghtsoonian, E.
Acta Metallurgica, Vol. 17, Issue 11
DOI: 10.1016/0001-6160(69)90152-7

Texture, Second-Phase Particles, and the Anisotropy of Deformation Behavior in TTMP AZ61
journal, April 2015

Berman, Tracy D.; Pollock, Tresa M.; Jones, J. Wayne
Metallurgical and Materials Transactions A, Vol. 46, Issue 7
DOI: 10.1007/s11661-015-2913-5

Influence of grain shape on the planar anisotropy of rolled steel sheets – evaluation of three models
journal, May 2009

Delannay, L.; Melchior, M. A.; Signorelli, J. W.
Computational Materials Science, Vol. 45, Issue 3
DOI: 10.1016/j.commatsci.2008.06.013

Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys
journal, April 2003

Nie, J. F.
Scripta Materialia, Vol. 48, Issue 8
DOI: 10.1016/S1359-6462(02)00497-9

Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium
journal, April 2015

Cepeda-Jiménez, C. M.; Molina-Aldareguia, J. M.; Pérez-Prado, M. T.
Acta Materialia, Vol. 88
DOI: 10.1016/j.actamat.2015.01.032

Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy
journal, July 2008

Chino, Yasumasa; Kimura, Katsuya; Mabuchi, Mamoru
Materials Science and Engineering: A, Vol. 486, Issue 1-2
DOI: 10.1016/j.msea.2007.09.058

The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
journal, April 2003

Koike, J.; Kobayashi, T.; Mukai, T.
Acta Materialia, Vol. 51, Issue 7
DOI: 10.1016/S1359-6454(03)00005-3

Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations
journal, April 2002

Raabe, D.; Klose, P.; Engl, B.
Advanced Engineering Materials, Vol. 4, Issue 4
DOI: 10.1002/1527-2648(200204)4:4<169::AID-ADEM169>3.0.CO;2-G

The origin and enhancement of ${0 0 0 1}$ $〈 1 1 \bar{2} 0 〉$ texture during heat treatment of rolled AZ31B magnesium alloys
journal, August 2015

Steiner, M. A.; Bhattacharyya, J. J.; Agnew, S. R.
Acta Materialia, Vol. 95
DOI: 10.1016/j.actamat.2015.04.043

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Groeber, Michael A.; Jackson, Michael A.
Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1
DOI: 10.1186/2193-9772-3-5

Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31
journal, February 2014

Kondori, Babak; Benzerga, A. Amine
Metallurgical and Materials Transactions A, Vol. 45, Issue 8
DOI: 10.1007/s11661-014-2211-7

On the notch ductility of a magnesium-rare earth alloy
journal, October 2015

Kondori, B.; Benzerga, A. A.
Materials Science and Engineering: A, Vol. 647
DOI: 10.1016/j.msea.2015.08.077

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
journal, March 2015

Lentz, Martin; Klaus, Manuela; Wagner, Michael
Materials Science and Engineering: A, Vol. 628
DOI: 10.1016/j.msea.2015.01.069

Fracture Strains, Damage Mechanisms and Anisotropy in a Magnesium Alloy Across a Range of Stress Triaxialities
journal, October 2013

Kondori, B.; Benzerga, A. A.
Experimental Mechanics, Vol. 54, Issue 3
DOI: 10.1007/s11340-013-9812-8

Texture Analysis with MTEX – Free and Open Source Software Toolbox
journal, February 2010

Bachmann, F.; Hielscher, Ralf; Schaeben, Helmut
Solid State Phenomena, Vol. 160
DOI: 10.4028/www.scientific.net/SSP.160.63

Material design for magnesium alloys with high deformability
journal, February 2015

Somekawa, Hidetoshi; Yamaguchi, Masatake; Osawa, Yoshiaki
Philosophical Magazine, Vol. 95, Issue 8
DOI: 10.1080/14786435.2015.1009518

Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys
journal, October 2010

Raeisinia, Babak; Agnew, Sean R.
Scripta Materialia, Vol. 63, Issue 7
DOI: 10.1016/j.scriptamat.2010.03.054

The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals
journal, October 1984

Tome, C.; Canova, G. R.; Kocks, U. F.
Acta Metallurgica, Vol. 32, Issue 10
DOI: 10.1016/0001-6160(84)90222-0

Heterogeneity of deformation texture in equal channel angular extrusion of copper
journal, September 2004

Li, Saiyi; Beyerlein, Irene J.; Necker, Carl T.
Acta Materialia, Vol. 52, Issue 16
DOI: 10.1016/j.actamat.2004.06.042

Investigation of Texture in ECAP Materials Using Neutron Diffraction
journal, August 2003

Vogel, Sven C.; Alexander, D. J.; Beyerlein, Irene J.
Materials Science Forum, Vol. 426-432
DOI: 10.4028/www.scientific.net/MSF.426-432.2661

Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
journal, December 2001

Agnew, S. R.; Yoo, M. H.; Tomé, C. N.
Acta Materialia, Vol. 49, Issue 20
DOI: 10.1016/S1359-6454(01)00297-X

Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading
journal, October 1998

Mukai, T.; Mohri, T.; Mabuchi, M.
Scripta Materialia, Vol. 39, Issue 9
DOI: 10.1016/S1359-6462(98)00296-6

Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression
journal, September 2011

Dobroň, Patrik; Chmelík, František; Yi, Sangbong
Scripta Materialia, Vol. 65, Issue 5
DOI: 10.1016/j.scriptamat.2011.05.027

Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals
journal, October 2010

Hutchinson, W. B.; Barnett, M. R.
Scripta Materialia, Vol. 63, Issue 7
DOI: 10.1016/j.scriptamat.2010.05.047

Texture effects on plastic deformation of magnesium
journal, March 2005

Gehrmann, Robert; Frommert, Matthias M.; Gottstein, Günter
Materials Science and Engineering: A, Vol. 395, Issue 1-2
DOI: 10.1016/j.msea.2005.01.002

Twin recrystallization mechanisms in magnesium-rare earth alloys
journal, September 2015

Basu, I.; Al-Samman, T.
Acta Materialia, Vol. 96
DOI: 10.1016/j.actamat.2015.05.044

Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets
journal, October 2010

Hantzsche, K.; Bohlen, J.; Wendt, J.
Scripta Materialia, Vol. 63, Issue 7
DOI: 10.1016/j.scriptamat.2009.12.033

Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature
journal, April 2005

Koike, J.; Ohyama, R.
Acta Materialia, Vol. 53, Issue 7
DOI: 10.1016/j.actamat.2005.01.008

The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility
journal, November 2008

Stanford, N.; Barnett, M. R.
Materials Science and Engineering: A, Vol. 496, Issue 1-2
DOI: 10.1016/j.msea.2008.05.045

Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries
journal, May 2013

Nie, J. F.; Zhu, Y. M.; Liu, J. Z.
Science, Vol. 340, Issue 6135
DOI: 10.1126/science.1229369

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys
journal, October 2008

Stanford, N.; Atwell, D.; Beer, A.
Scripta Materialia, Vol. 59, Issue 7
DOI: 10.1016/j.scriptamat.2008.06.008

Solid solution strengthening of magnesium single crystals—I alloying behaviour in basal slip
journal, November 1969

Akhtar, A.; Teghtsoonian, E.
Acta Metallurgica, Vol. 17, Issue 11
DOI: 10.1016/0001-6160(69)90151-5

Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer
journal, March 2010

Choi, H. J.; Kim, Y.; Shin, J. H.
Materials Science and Engineering: A, Vol. 527, Issue 6
DOI: 10.1016/j.msea.2009.10.035

Effect of precipitate shape on slip and twinning in magnesium alloys
journal, March 2011

Robson, J. D.; Stanford, N.; Barnett, M. R.
Acta Materialia, Vol. 59, Issue 5
DOI: 10.1016/j.actamat.2010.11.060

Anisotropy and Non-Uniformity in Plastic Behavior of AZ31 Magnesium Alloy Plates
journal, January 2003

Yukutake, Eitaro; Kaneko, Junichi; Sugamata, Makoto
MATERIALS TRANSACTIONS, Vol. 44, Issue 4
DOI: 10.2320/matertrans.44.452

On crystal plasticity formability analysis for magnesium alloy sheets
journal, March 2011

Wang, H.; Wu, P. D.; Boyle, K. P.
International Journal of Solids and Structures, Vol. 48, Issue 6
DOI: 10.1016/j.ijsolstr.2010.12.004

Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets
journal, February 2011

Wu, D.; Chen, R. S.; Han, E. H.
Journal of Alloys and Compounds, Vol. 509, Issue 6
DOI: 10.1016/j.jallcom.2010.11.141

An in situ study of prismatic glide in magnesium—I. The rate controlling mechanism
journal, August 1985

Couret, A.; Caillard, D.
Acta Metallurgica, Vol. 33, Issue 8
DOI: 10.1016/0001-6160(85)90045-8

Enhanced stretch formability of Mg–Al–Zn alloy sheets rolled at high temperature (723K)
journal, March 2009

Chino, Y.; Mabuchi, M.
Scripta Materialia, Vol. 60, Issue 6
DOI: 10.1016/j.scriptamat.2008.11.029

Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
journal, June 2005

Agnew, Sean R.; Duygulu, Özgür
International Journal of Plasticity, Vol. 21, Issue 6
DOI: 10.1016/j.ijplas.2004.05.018

Precipitate-induced anisotropy in binary Al-Cu alloys
journal, November 1998

Barlat, F.; Liu, J.
Materials Science and Engineering: A, Vol. 257, Issue 1
DOI: 10.1016/S0921-5093(98)00823-5

Prediction of Magnesium Alloy Formability: The Role of Texture
book, February 2016

Miller, V. M.; Berman, T. D.; Beyerlein, I. J.
Magnesium Technology 2016
DOI: 10.1002/9781119274803.ch51

Effect of grain size on high strain rate deformation of rolled Mg–4Y–3RE alloy in compression
journal, May 2015

Asgari, H.; Szpunar, J. A.; Odeshi, A. G.
Materials Science and Engineering: A, Vol. 633
DOI: 10.1016/j.msea.2015.03.020

Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys
journal, November 2010

Raeisinia, Babak; Agnew, Sean R.; Akhtar, Ainul
Metallurgical and Materials Transactions A, Vol. 42, Issue 5
DOI: 10.1007/s11661-010-0527-5

Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys
journal, September 2013

Basu, I.; Al-Samman, T.; Gottstein, G.
Materials Science and Engineering: A, Vol. 579
DOI: 10.1016/j.msea.2013.04.076

Solute strengthening of prismatic slip, basal slip and twinning in Mg and Mg–Zn binary alloys
journal, August 2013

Stanford, N.; Barnett, M. R.
International Journal of Plasticity, Vol. 47
DOI: 10.1016/j.ijplas.2013.01.012

Enhanced stretch formability of Mn-free AZ31 Mg alloy rolled by cross-roll rolling
journal, April 2009

Chino, Yasumasa; Sassa, Kensuke; Mabuchi, Mamoru
Journal of Materials Science, Vol. 44, Issue 7
DOI: 10.1007/s10853-009-3248-7

The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys
journal, January 2015

Stanford, N.; Marceau, R. K. W.; Barnett, M. R.
Acta Materialia, Vol. 82
DOI: 10.1016/j.actamat.2014.09.022

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
journal, October 2004

Barnett, M. R.; Keshavarz, Z.; Beer, A. G.
Acta Materialia, Vol. 52, Issue 17
DOI: 10.1016/j.actamat.2004.07.015

Stretch formability of AZ31 Mg alloy sheets at different testing temperatures
journal, September 2007

Chino, Yasumasa; Iwasaki, Hajime; Mabuchi, Mamoru
Materials Science and Engineering: A, Vol. 466, Issue 1-2
DOI: 10.1016/j.msea.2007.02.027

Microstructure Modification and Deformation Behavior of Fine Grained AZ61L Sheet Produced by Thixomolding® and Thermomechanical Processing
book, January 2012

Berman, T. D.; Donlon, W.; Miller, V. M.
Magnesium Technology 2012
DOI: 10.1007/978-3-319-48203-3_62

Texture in Equal-Channel Angular Pressed Aluminum and Nickel
journal, August 2002

Vogel, Sven C.; Beyerlein, Irene J.; Bourke, Mark A. M.
Materials Science Forum, Vol. 408-412
DOI: 10.4028/www.scientific.net/MSF.408-412.673

The texture and anisotropy of magnesium–zinc–rare earth alloy sheets
journal, April 2007

Bohlen, Jan; Nürnberg, Marcus R.; Senn, Jeremy W.
Acta Materialia, Vol. 55, Issue 6
DOI: 10.1016/j.actamat.2006.11.013

Modelling flow stress anisotropy caused by deformation induced dislocation boundaries
journal, June 1997

Winther, G.
Acta Materialia, Vol. 45, Issue 6
DOI: 10.1016/S1359-6454(96)00345-X

Design strategy for microalloyed ultra-ductile magnesium alloys
journal, June 2009

Hänzi, A. C.; Dalla Torre, F. H.; Sologubenko, A. S.
Philosophical Magazine Letters, Vol. 89, Issue 6
DOI: 10.1080/09500830902960125

A model for texture development dominated by deformation twinning: Application to zirconium alloys
journal, November 1991

Tomé, C. N.; Lebensohn, R. A.; Kocks, U. F.
Acta Metallurgica et Materialia, Vol. 39, Issue 11
DOI: 10.1016/0956-7151(91)90083-D

Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation
journal, February 2001

Yamashita, Akihiro; Horita, Zenji; Langdon, Terence G.
Materials Science and Engineering: A, Vol. 300, Issue 1-2
DOI: 10.1016/S0921-5093(00)01660-9

Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions
journal, September 1999

Tomé, Carlos N.
Modelling and Simulation in Materials Science and Engineering, Vol. 7, Issue 5
DOI: 10.1088/0965-0393/7/5/305

Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling
journal, April 2005

Li, Saiyi; Beyerlein, Irene J.; Alexander, David J.
Acta Materialia, Vol. 53, Issue 7
DOI: 10.1016/j.actamat.2005.01.023

{112̄2}〈23〉 Slip system in magnesium
journal, July 1973

Obara, T.; Yoshinga, H.; Morozumi, S.
Acta Metallurgica, Vol. 21, Issue 7
DOI: 10.1016/0001-6160(73)90141-7

Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures
journal, October 2011

Zhang, Hua; Huang, Guangsheng; Kong, Deqiang
Journal of Materials Processing Technology, Vol. 211, Issue 10
DOI: 10.1016/j.jmatprotec.2011.04.009

On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
journal, January 2011

Sandlöbes, S.; Zaefferer, S.; Schestakow, I.
Acta Materialia, Vol. 59, Issue 2
DOI: 10.1016/j.actamat.2010.08.031

Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding
journal, January 2014

Carpenter, John S.; McCabe, Rodney J.; Zheng, Shijian J.
Metallurgical and Materials Transactions A, Vol. 45, Issue 4
DOI: 10.1007/s11661-013-2162-4

Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B
journal, March 2009

John Neil, C.; Agnew, Sean R.
International Journal of Plasticity, Vol. 25, Issue 3
DOI: 10.1016/j.ijplas.2008.05.003

Fabrication of excellent mechanical properties AZ31 magnesium alloy sheets by conventional rolling and subsequent annealing
journal, August 2011

Miao, Qing; Hu, Lianxi; Wang, Guojun
Materials Science and Engineering: A, Vol. 528, Issue 22-23
DOI: 10.1016/j.msea.2011.05.023

A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
journal, September 1993

Lebensohn, R. A.; Tomé, C. N.
Acta Metallurgica et Materialia, Vol. 41, Issue 9
DOI: 10.1016/0956-7151(93)90130-K

The onset of twinning in metals: a constitutive description
journal, November 2001

Meyers, M. A.; Vöhringer, O.; Lubarda, V. A.
Acta Materialia, Vol. 49, Issue 19
DOI: 10.1016/S1359-6454(01)00300-7

Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793K
journal, April 2009

Huang, Xinsheng; Suzuki, Kazutaka; Saito, Naobumi
Scripta Materialia, Vol. 60, Issue 8
DOI: 10.1016/j.scriptamat.2008.12.035

Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet
journal, July 2008

Jain, A.; Duygulu, O.; Brown, D. W.
Materials Science and Engineering: A, Vol. 486, Issue 1-2
DOI: 10.1016/j.msea.2007.09.069

Similar Records in DOE PAGES and OSTI.GOV collections:

A measure of plastic anisotropy for hexagonal close packed metals: Application to alloying effects on the formability of Mg

Journal Article Arul Kumar, Mariyappan ; Beyerlein, Irene Jane ; Tome, Carlos N. - Journal of Alloys and Compounds

Mg is inherently plastically anisotropic and, over the years, alloying development efforts have sought to reduce the plastic anisotropy in order to enhance formability. To understand the relationship between alloy type and plastic anisotropy, we use a visco-plastic self-consistent (VPSC) polycrystal plasticity model to relate the macroscopic constitutive response to the underlying slip and twinning mechanisms in pure Mg and several Mg alloys. In the calculations, the influence of alloy type is represented by the differences in the CRSS values among the basal, prismatic, pyramidal slip and tensile twin systems. We show that for the same initial texture, this microscopic-levelmore »« less
Cited by 49
https://doi.org/10.1016/j.jallcom.2016.10.287

Full Text Available
The effect of rare earth elements on the texture and formability of asymmetrically rolled magnesium sheet

Conference Alderman, Dr. Martyn ; Cavin, Odis Burl ; Davis, Dr. Bruce ; ...

The lack of formability is a serious issue when considering magnesium alloys for various applications. Standard symmetric rolling introduces a strong basal texture that decreases the formability; however, asymmetric rolling has been put forward as a possible route to produce sheet with weaker texture and greater ductility. It has also been shown in recent work that weaker textures can be produced through the addition of rare earth elements to magnesium alloys. Therefore, this study has been carried out to investigate the effect of rare earth additions on the texture changes during asymmetric rolling. Two alloys have been used, AZ31B andmore »« less
Effect of intermediate annealing on texture evolution and plastic anisotropy in an Al-Mg autobody alloy

Journal Article Li, S ; Kang, S B ; Ko, H S - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

The effect of intermediate annealing (IA) on texture evolution and plastic anisotropy of an Al-Mg autobody sheet was investigated. The formation of annealing textures after two finds of final heat treatments was discussed with the aid of microstructural characterization. The results showed that the IA treatment had obvious influences on the final annealing texture as well as the resulting plastic anisotropy. It led to relatively lower recrystallization extent and stronger retained rolling orientations in the sheets after final heat treatment. The final annealing textures were very weak due to the dominant influence of particle stimulated nucleation. The other orientations occurringmore »« less
https://doi.org/10.1007/s11661-000-0057-7
Textures in Strip-Cast Aluminum Alloys: Their On-Line Monitoring and Quantitative Effects on Formability. Final Technical Report

Technical Report Man, Chi-Sing

Aluminum sheets produced by continuous casting (CC) provide energy and economic savings of at least 25 and 14 percent, respectively, over sheets made from conventional direct chill (DC) ingot casting and rolling. As a result of the much simpler production route in continuous casting, however, the formability of CC aluminum alloys is often somewhat inferior to that of their DC counterparts. The mechanical properties of CC alloys can be improved by controlling their microstructure through optimal thermomechanical processing. Suitable annealing is an important means to improve the formability of CC aluminum alloy sheets. Recrystallization of deformed grains occurs during annealing,more »« less
https://doi.org/10.2172/812500

Full Text Available
Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling

Journal Article Habib, Saadi A. ; Khan, Akhtar S. ; Gnäupel-Herold, Thomas ; ... - International Journal of Plasticity
Cited by 77
https://doi.org/10.1016/j.ijplas.2017.04.006

Similar Records

Title: Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability

Citation Formats

Numerical modeling of formability of extruded magnesium alloy tubes journal, January 2010

Enhanced ductility in strongly textured magnesium produced by equal channel angular processing journal, February 2004

Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation journal, February 2012

Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature journal, October 2009

Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature journal, July 2011

Study of a drawing-quality sheet steel. II: Forming-limit curves by experiments and micromechanical simulations journal, August 2010

Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass journal, July 2011

Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy journal, May 2015

On modeling anisotropy in deformation processes involving textured polycrystals with distorted grain shape journal, December 1990

Influence of texture on Hall–Petch relationships in an Mg alloy journal, December 2014

Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling journal, February 2009

Texture enhancement during grain growth of magnesium alloy AZ31B journal, March 2015

Formability analysis of extra-deep drawing steel journal, December 2002

Macroscopic anisotropy in AA5019A sheets journal, May 2000

Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys journal, October 2011

Solid solution strengthening of magnesium single crystals—ii the effect of solute on the ease of prismatic slip journal, November 1969

Texture, Second-Phase Particles, and the Anisotropy of Deformation Behavior in TTMP AZ61 journal, April 2015

Influence of grain shape on the planar anisotropy of rolled steel sheets – evaluation of three models journal, May 2009

Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys journal, April 2003

Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium journal, April 2015

Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy journal, July 2008

The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys journal, April 2003

Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations journal, April 2002

The origin and enhancement of { 0 0 0 1 } 〈 1 1 2 ¯ 0 〉 texture during heat treatment of rolled AZ31B magnesium alloys journal, August 2015

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D journal, April 2014

Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31 journal, February 2014

On the notch ductility of a magnesium-rare earth alloy journal, October 2015

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling journal, March 2015

Fracture Strains, Damage Mechanisms and Anisotropy in a Magnesium Alloy Across a Range of Stress Triaxialities journal, October 2013

Texture Analysis with MTEX – Free and Open Source Software Toolbox journal, February 2010

Material design for magnesium alloys with high deformability journal, February 2015

Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys journal, October 2010

The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals journal, October 1984

Heterogeneity of deformation texture in equal channel angular extrusion of copper journal, September 2004

Investigation of Texture in ECAP Materials Using Neutron Diffraction journal, August 2003

Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y journal, December 2001

Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading journal, October 1998

Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression journal, September 2011

Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals journal, October 2010

Texture effects on plastic deformation of magnesium journal, March 2005

Twin recrystallization mechanisms in magnesium-rare earth alloys journal, September 2015

Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets journal, October 2010

Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature journal, April 2005

The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility journal, November 2008

Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries journal, May 2013

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys journal, October 2008

Solid solution strengthening of magnesium single crystals—I alloying behaviour in basal slip journal, November 1969

Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer journal, March 2010

Effect of precipitate shape on slip and twinning in magnesium alloys journal, March 2011

Anisotropy and Non-Uniformity in Plastic Behavior of AZ31 Magnesium Alloy Plates journal, January 2003

On crystal plasticity formability analysis for magnesium alloy sheets journal, March 2011

Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets journal, February 2011

An in situ study of prismatic glide in magnesium—I. The rate controlling mechanism journal, August 1985

Enhanced stretch formability of Mg–Al–Zn alloy sheets rolled at high temperature (723K) journal, March 2009

Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B journal, June 2005

Precipitate-induced anisotropy in binary Al-Cu alloys journal, November 1998

Prediction of Magnesium Alloy Formability: The Role of Texture book, February 2016

Effect of grain size on high strain rate deformation of rolled Mg–4Y–3RE alloy in compression journal, May 2015

Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys journal, November 2010

Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys journal, September 2013

Solute strengthening of prismatic slip, basal slip and twinning in Mg and Mg–Zn binary alloys journal, August 2013

Enhanced stretch formability of Mn-free AZ31 Mg alloy rolled by cross-roll rolling journal, April 2009

The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys journal, January 2015

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn journal, October 2004

Stretch formability of AZ31 Mg alloy sheets at different testing temperatures journal, September 2007

Microstructure Modification and Deformation Behavior of Fine Grained AZ61L Sheet Produced by Thixomolding® and Thermomechanical Processing book, January 2012

Texture in Equal-Channel Angular Pressed Aluminum and Nickel journal, August 2002

The texture and anisotropy of magnesium–zinc–rare earth alloy sheets journal, April 2007

Modelling flow stress anisotropy caused by deformation induced dislocation boundaries journal, June 1997

Design strategy for microalloyed ultra-ductile magnesium alloys journal, June 2009

A model for texture development dominated by deformation twinning: Application to zirconium alloys journal, November 1991

Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation journal, February 2001

Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions journal, September 1999

Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling journal, April 2005

{112̄2}〈23〉 Slip system in magnesium journal, July 1973

Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures journal, October 2011

On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys journal, January 2011

Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding journal, January 2014

Numerical modeling of formability of extruded magnesium alloy tubes
journal, January 2010

Enhanced ductility in strongly textured magnesium produced by equal channel angular processing
journal, February 2004

Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation
journal, February 2012

Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature
journal, October 2009

Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature
journal, July 2011

Study of a drawing-quality sheet steel. II: Forming-limit curves by experiments and micromechanical simulations
journal, August 2010

Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass
journal, July 2011

Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy
journal, May 2015

On modeling anisotropy in deformation processes involving textured polycrystals with distorted grain shape
journal, December 1990

Influence of texture on Hall–Petch relationships in an Mg alloy
journal, December 2014

Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling
journal, February 2009

Texture enhancement during grain growth of magnesium alloy AZ31B
journal, March 2015

Formability analysis of extra-deep drawing steel
journal, December 2002

Macroscopic anisotropy in AA5019A sheets
journal, May 2000

Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys
journal, October 2011

Solid solution strengthening of magnesium single crystals—ii the effect of solute on the ease of prismatic slip
journal, November 1969

Texture, Second-Phase Particles, and the Anisotropy of Deformation Behavior in TTMP AZ61
journal, April 2015

Influence of grain shape on the planar anisotropy of rolled steel sheets – evaluation of three models
journal, May 2009

Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys
journal, April 2003

Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium
journal, April 2015

Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy
journal, July 2008

The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
journal, April 2003

Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations
journal, April 2002

The origin and enhancement of ${0 0 0 1}$ $〈 1 1 \bar{2} 0 〉$ texture during heat treatment of rolled AZ31B magnesium alloys
journal, August 2015

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31
journal, February 2014

On the notch ductility of a magnesium-rare earth alloy
journal, October 2015

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
journal, March 2015

Fracture Strains, Damage Mechanisms and Anisotropy in a Magnesium Alloy Across a Range of Stress Triaxialities
journal, October 2013

Texture Analysis with MTEX – Free and Open Source Software Toolbox
journal, February 2010

Material design for magnesium alloys with high deformability
journal, February 2015

Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys
journal, October 2010

The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals
journal, October 1984

Heterogeneity of deformation texture in equal channel angular extrusion of copper
journal, September 2004

Investigation of Texture in ECAP Materials Using Neutron Diffraction
journal, August 2003

Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
journal, December 2001

Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading
journal, October 1998

Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression
journal, September 2011

Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals
journal, October 2010

Texture effects on plastic deformation of magnesium
journal, March 2005

Twin recrystallization mechanisms in magnesium-rare earth alloys
journal, September 2015

Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets
journal, October 2010

Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature
journal, April 2005

The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility
journal, November 2008

Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries
journal, May 2013

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys
journal, October 2008

Solid solution strengthening of magnesium single crystals—I alloying behaviour in basal slip
journal, November 1969

Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer
journal, March 2010

Effect of precipitate shape on slip and twinning in magnesium alloys
journal, March 2011

Anisotropy and Non-Uniformity in Plastic Behavior of AZ31 Magnesium Alloy Plates
journal, January 2003

On crystal plasticity formability analysis for magnesium alloy sheets
journal, March 2011

Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets
journal, February 2011

An in situ study of prismatic glide in magnesium—I. The rate controlling mechanism
journal, August 1985

Enhanced stretch formability of Mg–Al–Zn alloy sheets rolled at high temperature (723K)
journal, March 2009

Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
journal, June 2005

Precipitate-induced anisotropy in binary Al-Cu alloys
journal, November 1998

Prediction of Magnesium Alloy Formability: The Role of Texture
book, February 2016

Effect of grain size on high strain rate deformation of rolled Mg–4Y–3RE alloy in compression
journal, May 2015

Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys
journal, November 2010

Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys
journal, September 2013

Solute strengthening of prismatic slip, basal slip and twinning in Mg and Mg–Zn binary alloys
journal, August 2013

Enhanced stretch formability of Mn-free AZ31 Mg alloy rolled by cross-roll rolling
journal, April 2009

The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys
journal, January 2015

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
journal, October 2004

Stretch formability of AZ31 Mg alloy sheets at different testing temperatures
journal, September 2007

Microstructure Modification and Deformation Behavior of Fine Grained AZ61L Sheet Produced by Thixomolding® and Thermomechanical Processing
book, January 2012

Texture in Equal-Channel Angular Pressed Aluminum and Nickel
journal, August 2002

The texture and anisotropy of magnesium–zinc–rare earth alloy sheets
journal, April 2007

Modelling flow stress anisotropy caused by deformation induced dislocation boundaries
journal, June 1997

Design strategy for microalloyed ultra-ductile magnesium alloys
journal, June 2009

A model for texture development dominated by deformation twinning: Application to zirconium alloys
journal, November 1991

Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation
journal, February 2001

Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions
journal, September 1999

Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling
journal, April 2005

{112̄2}〈23〉 Slip system in magnesium
journal, July 1973

Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures
journal, October 2011

On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
journal, January 2011

Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding
journal, January 2014

Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B
journal, March 2009

Fabrication of excellent mechanical properties AZ31 magnesium alloy sheets by conventional rolling and subsequent annealing
journal, August 2011