Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
Abstract
Electron Beam Melting (EBM) is a metal powder bed-based Additive Manufacturing (AM) technology that makes possible the fabrication of three dimensional near-net-shaped parts directly from computer models. EBM technology has been in continuously updating, obtaining optimized properties of the processed alloys. Ti-6Al-4V titanium alloy is the most widely used and studied alloy for this technology and is the focus of this work. Several research works have been completed to study the mechanisms of microstructure formation as well as its influence on mechanical properties. However, the relationship is not completely understood, and more systematic research work is necessary in order to attain a better understanding of these features. In this work, samples fabricated at different locations, orientations, and distances from the build platform have been characterized, studying the relationship of these variables with the resulting material intrinsic characteristics and properties (surface topography, microstructure, porosity, micro-hardness and static mechanical properties). This study has revealed that porosity is the main factor controlling mechanical properties relative to the other studied variables. Therefore, in future process developments, decreasing of the porosity should be considered as the primary goal in order to improve mechanical properties.
- Authors:
-
- Worcester Polytechnic Institute, Worcester, MA (United States). Integrative Materials Design Center
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science & Technology Division; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility (MDF)
- Sponsoring Org.:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- OSTI Identifier:
- 1240567
- Alternate Identifier(s):
- OSTI ID: 1346576
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Additive Manufacturing
- Additional Journal Information:
- Journal Volume: 10; Journal Issue: C; Journal ID: ISSN 2214-8604
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Galarraga, Haize, Lados, Diana A., Dehoff, Ryan R., Kirka, Michael M., and Nandwana, Peeyush. Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM). United States: N. p., 2016.
Web. doi:10.1016/j.addma.2016.02.003.
Galarraga, Haize, Lados, Diana A., Dehoff, Ryan R., Kirka, Michael M., & Nandwana, Peeyush. Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM). United States. https://doi.org/10.1016/j.addma.2016.02.003
Galarraga, Haize, Lados, Diana A., Dehoff, Ryan R., Kirka, Michael M., and Nandwana, Peeyush. Fri .
"Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)". United States. https://doi.org/10.1016/j.addma.2016.02.003. https://www.osti.gov/servlets/purl/1240567.
@article{osti_1240567,
title = {Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)},
author = {Galarraga, Haize and Lados, Diana A. and Dehoff, Ryan R. and Kirka, Michael M. and Nandwana, Peeyush},
abstractNote = {Electron Beam Melting (EBM) is a metal powder bed-based Additive Manufacturing (AM) technology that makes possible the fabrication of three dimensional near-net-shaped parts directly from computer models. EBM technology has been in continuously updating, obtaining optimized properties of the processed alloys. Ti-6Al-4V titanium alloy is the most widely used and studied alloy for this technology and is the focus of this work. Several research works have been completed to study the mechanisms of microstructure formation as well as its influence on mechanical properties. However, the relationship is not completely understood, and more systematic research work is necessary in order to attain a better understanding of these features. In this work, samples fabricated at different locations, orientations, and distances from the build platform have been characterized, studying the relationship of these variables with the resulting material intrinsic characteristics and properties (surface topography, microstructure, porosity, micro-hardness and static mechanical properties). This study has revealed that porosity is the main factor controlling mechanical properties relative to the other studied variables. Therefore, in future process developments, decreasing of the porosity should be considered as the primary goal in order to improve mechanical properties.},
doi = {10.1016/j.addma.2016.02.003},
journal = {Additive Manufacturing},
number = C,
volume = 10,
place = {United States},
year = {Fri Jan 01 00:00:00 EST 2016},
month = {Fri Jan 01 00:00:00 EST 2016}
}
Web of Science
Works referenced in this record:
Additive Manufacturing: Making Imagination the Major Limitation
journal, March 2014
- Zhai, Yuwei; Lados, Diana A.; LaGoy, Jane L.
- JOM, Vol. 66, Issue 5
Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders
journal, May 2009
- Facchini, Luca; Magalini, Emanuele; Robotti, Pierfrancesco
- Rapid Prototyping Journal, Vol. 15, Issue 3
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
journal, August 2011
- Koike, Mari; Martinez, Kelly; Guo, Lilly
- Journal of Materials Processing Technology, Vol. 211, Issue 8
Review on Powder-Based Electron Beam Additive Manufacturing Technology
conference, July 2013
- Gong, Xibing; Anderson, Ted; Chou, Kevin
- ASME/ISCIE 2012 International Symposium on Flexible Automation
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
journal, November 2013
- Edwards, P.; O'Conner, A.; Ramulu, M.
- Journal of Manufacturing Science and Engineering, Vol. 135, Issue 6
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
journal, June 2013
- Hrabe, Nikolas; Quinn, Timothy
- Materials Science and Engineering: A, Vol. 573
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), part 1: Distance from build plate and part size
journal, June 2013
- Hrabe, Nikolas; Quinn, Timothy
- Materials Science and Engineering: A, Vol. 573
Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V
journal, February 2009
- Murr, L. E.; Esquivel, E. V.; Quinones, S. A.
- Materials Characterization, Vol. 60, Issue 2
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
journal, August 2013
- Rafi, H. K.; Karthik, N. V.; Gong, Haijun
- Journal of Materials Engineering and Performance, Vol. 22, Issue 12
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
journal, August 2010
- Al-Bermani, S. S.; Blackmore, M. L.; Zhang, W.
- Metallurgical and Materials Transactions A, Vol. 41, Issue 13
Additive manufacturing of Ti-6Al-4V alloy components for spacecraft applications
conference, June 2013
- Rawal, Suraj; Brantley, James; Karabudak, Nafiz
- 2013 6th International Conference on Recent Advances in Space Technologies (RAST)
Measurement of the interlamellar spacing of pearlite
journal, February 1984
- Vander Voort, G. F.; Roósz, A.
- Metallography, Vol. 17, Issue 1
Comparison of density measurement techniques for additive manufactured metallic parts
journal, August 2011
- Spierings, A. B.; Schneider, M.; Eggenberger, R.
- Rapid Prototyping Journal, Vol. 17, Issue 5
Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions
journal, December 2013
- Karlsson, Joakim; Snis, Anders; Engqvist, Håkan
- Journal of Materials Processing Technology, Vol. 213, Issue 12
Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants
journal, October 2012
- Chan, Kwai S.; Koike, Marie; Mason, Robert L.
- Metallurgical and Materials Transactions A, Vol. 44, Issue 2
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
journal, March 2014
- Edwards, P.; Ramulu, M.
- Materials Science and Engineering: A, Vol. 598
Research on Preheating of Titanium Alloy Powder in Electron Beam Melting Technology
journal, December 2011
- Weiwei, He; Wenpeng, Jia; Haiyan, Liu
- Rare Metal Materials and Engineering, Vol. 40, Issue 12
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
journal, November 2014
- Bauereiß, A.; Scharowsky, T.; Körner, C.
- Journal of Materials Processing Technology, Vol. 214, Issue 11
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
journal, January 2014
- Slotwinski, John A.; Garboczi, Edward J.; Hebenstreit, Keith M.
- Journal of Research of the National Institute of Standards and Technology, Vol. 119
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
journal, March 2013
- Leuders, S.; Thöne, M.; Riemer, A.
- International Journal of Fatigue, Vol. 48
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
journal, June 2015
- Kasperovich, Galina; Hausmann, Joachim
- Journal of Materials Processing Technology, Vol. 220
Works referencing / citing this record:
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
journal, February 2017
- Seifi, Mohsen; Gorelik, Michael; Waller, Jess
- JOM, Vol. 69, Issue 3
Damage Tolerance Evaluation of E-PBF-Manufactured Inconel 718 Strut Geometries by Advanced Characterization Techniques
journal, January 2020
- Kotzem, Daniel; Arold, Tizian; Niendorf, Thomas
- Materials, Vol. 13, Issue 1
Processing issues, machining, and applications of aluminum metal matrix composites
journal, November 2017
- Suthar, Jigar; Patel, K. M.
- Materials and Manufacturing Processes, Vol. 33, Issue 5
Heat treatment effect on the mechanical properties, roughness and bone ingrowth capacity of 3D printing porous titanium alloy
journal, January 2018
- Li, Zuhao; Liu, Chang; Wang, Bingfeng
- RSC Advances, Vol. 8, Issue 22
3D Printed Acetabular Cups for Total Hip Arthroplasty: A Review Article
journal, June 2019
- Dall’Ava,
- Metals, Vol. 9, Issue 7
Effect of Laser Energy Density, Internal Porosity and Heat Treatment on Mechanical Behavior of Biomedical Ti6Al4V Alloy Obtained with DMLS Technology
journal, July 2019
- Mierzejewska, Żaneta Anna
- Materials, Vol. 12, Issue 14
Correlations Between Powder Feedstock Quality, In Situ Porosity Detection, and Fatigue Behavior of Ti-6Al-4V Fabricated by Powder Bed Electron Beam Melting: A Step Towards Qualification
journal, July 2018
- Nandwana, Peeyush; Kirka, Michael M.; Paquit, Vincent C.
- JOM, Vol. 70, Issue 9
Influence of build layout and orientation on microstructural characteristics of electron beam melted Alloy 718
journal, September 2018
- Karimi, P.; Sadeghi, E.; Deng, D.
- The International Journal of Advanced Manufacturing Technology, Vol. 99, Issue 9-12
Effect of miniaturization and surface roughness on the mechanical properties of the electron beam melted superalloy Inconel®718
journal, October 2019
- Kotzem, D.; Dumke, P.; Sepehri, P.
- Progress in Additive Manufacturing, Vol. 5, Issue 3
Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components
journal, March 2020
- Wang, Pan; Goh, Min Hao; Li, Qiang
- Virtual and Physical Prototyping, Vol. 15, Issue 3
Phase Field Simulation of Dendritic Solidification of Ti-6Al-4V During Additive Manufacturing Process
journal, August 2018
- Wu, Linmin; Zhang, Jing
- JOM, Vol. 70, Issue 10
Prototype Orthopedic Bone Plates 3D Printed by Laser Melting Deposition
journal, March 2019
- Chioibasu, Diana; Achim, Alexandru; Popescu, Camelia
- Materials, Vol. 12, Issue 6
Additive Manufacturing of Metallic Materials: A Review
journal, May 2017
- Zhang, Yi; Wu, Linmin; Guo, Xingye
- Journal of Materials Engineering and Performance, Vol. 27, Issue 1
Metal Alloys for Fusion-Based Additive Manufacturing
journal, February 2018
- Zhang, Duyao; Sun, Shoujin; Qiu, Dong
- Advanced Engineering Materials, Vol. 20, Issue 5
Study on the Factors Affecting the Mechanical Behavior of Electron Beam Melted Ti6Al4V
journal, September 2017
- Pirozzi, Carmine; Franchitti, Stefania; Borrelli, Rosario
- Journal of Materials Engineering and Performance, Vol. 26, Issue 9
Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components
text, January 2020
- Wang, Pan; Goh, Min Hao; Li, Qiang
- Taylor & Francis
The Hardness of Additively Manufactured Alloys
journal, October 2018
- Zuback, J. S.; DebRoy, T.
- Materials, Vol. 11, Issue 11
Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components
text, January 2020
- Wang, Pan; Goh, Min Hao; Li, Qiang
- Taylor & Francis
Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants
journal, August 2019
- Lowther, Morgan; Louth, Sophie; Davey, Amy
- Additive Manufacturing, Vol. 28
Two-dimensional thermal finite element model of directed energy deposition: Matching melt pool temperature profile with pyrometer measurement
journal, September 2020
- Jelinek, Bohumir; Young, William J.; Dantin, Matthew
- Journal of Manufacturing Processes, Vol. 57
Tachycardia After Glutamate Injection in rat Spinal cord is not Blocked by Kynurenate or Mimicked by Metabotropic Agonists
journal, September 1996
- Arnolda, Leonard F.; Pilowsky, Paul M.; Minson, Jane B.
- Clinical and Experimental Pharmacology and Physiology, Vol. 23, Issue 9
Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy
journal, February 2017
- Kabir, Mohammad; Richter, Henning
- Materials, Vol. 10, Issue 2
Challenges in Additive Manufacturing of Space Parts: Powder Feedstock Cross-Contamination and Its Impact on End Products
journal, May 2017
- Brandão, Ana; Gerard, Romain; Gumpinger, Johannes
- Materials, Vol. 10, Issue 5
Prototype Orthopedic Bone Plates 3D Printed by Laser Melting Deposition
journal, March 2019
- Chioibasu, Diana; Achim, Alexandru; Popescu, Camelia
- Materials, Vol. 12, Issue 6