Enhancement of orientation gradients during simple shear deformation by application of simple compression

Jahedi, Mohammad; Ardeljan, Milan; Beyerlein, Irene J.; Paydar, Mohammad Hossein; Knezevic, Marko

doi:10.1063/1.4922032

Title: Enhancement of orientation gradients during simple shear deformation by application of simple compression

Authors:

Jahedi, Mohammad ^[1]; Ardeljan, Milan ^[2]; Beyerlein, Irene J. ^[3]; Paydar, Mohammad Hossein ^[4]; Knezevic, Marko ^[2]

Department of Mechanical Engineering, University of New Hampshire, Durham, New Hampshire 03824, USA, Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
Department of Mechanical Engineering, University of New Hampshire, Durham, New Hampshire 03824, USA
Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran

Publication Date:: Wed Jun 03 00:00:00 EDT 2015

Sponsoring Org.:: USDOE

OSTI Identifier:: 1228210

Grant/Contract Number:: ER20140348

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Applied Physics

Additional Journal Information:: Journal Name: Journal of Applied Physics Journal Volume: 117 Journal Issue: 21; Journal ID: ISSN 0021-8979

Publisher:: American Institute of Physics

Country of Publication:: United States

Language:: English

Citation Formats


                    Jahedi, Mohammad, Ardeljan, Milan, Beyerlein, Irene J., Paydar, Mohammad Hossein, and Knezevic, Marko. Enhancement of orientation gradients during simple shear deformation by application of simple compression.  United States: N. p., 2015. 
Web.  doi:10.1063/1.4922032.

Copy to clipboard


                    Jahedi, Mohammad, Ardeljan, Milan, Beyerlein, Irene J., Paydar, Mohammad Hossein, & Knezevic, Marko. Enhancement of orientation gradients during simple shear deformation by application of simple compression.  United States.  https://doi.org/10.1063/1.4922032

Copy to clipboard


                    Jahedi, Mohammad, Ardeljan, Milan, Beyerlein, Irene J., Paydar, Mohammad Hossein, and Knezevic, Marko. Wed .  
"Enhancement of orientation gradients during simple shear deformation by application of simple compression".  United States.  https://doi.org/10.1063/1.4922032.

Copy to clipboard


                    
@article{osti_1228210,

  title        = {Enhancement of orientation gradients during simple shear deformation by application of simple compression},

  author       = {Jahedi, Mohammad and Ardeljan, Milan and Beyerlein, Irene J. and Paydar, Mohammad Hossein and Knezevic, Marko},

  abstractNote = {},

  doi          = {10.1063/1.4922032},

  journal      = {Journal of Applied Physics},

  number       = 21,

  volume       = 117,

  place        = {United States},

  year         = {Wed Jun 03 00:00:00 EDT 2015},

  month        = {Wed Jun 03 00:00:00 EDT 2015}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1063/1.4922032

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 45 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

The type of dislocation interaction as the factor determining work hardening
journal, December 1980

Lavrentev, F. F.
Materials Science and Engineering, Vol. 46, Issue 2
DOI: 10.1016/0025-5416(80)90175-5

Second Paper on Statistics Associated with the Random Disorientation of Cubes
journal, January 1958

Mackenzie, J. K.
Biometrika, Vol. 45, Issue 1-2
DOI: 10.1093/biomet/45.1-2.229

A high-performance computational framework for fast crystal plasticity simulations
journal, February 2014

Knezevic, Marko; Savage, Daniel J.
Computational Materials Science, Vol. 83
DOI: 10.1016/j.commatsci.2013.11.012

Anomalous Basal Slip Activity in Zirconium under High-strain Deformation
journal, September 2013

Knezevic, Marko; Beyerlein, Irene J.; Nizolek, Thomas
Materials Research Letters, Vol. 1, Issue 3
DOI: 10.1080/21663831.2013.794375

Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding
journal, June 2014

Knezevic, Marko; Nizolek, Thomas; Ardeljan, Milan
International Journal of Plasticity, Vol. 57
DOI: 10.1016/j.ijplas.2014.01.008

Technical parameters affecting grain refinement by high pressure torsion
journal, December 2009

Hohenwarter, Anton; Bachmaier, Andrea; Gludovatz, Bernd
International Journal of Materials Research, Vol. 100, Issue 12
DOI: 10.3139/146.110224

Scaling of microstructural parameters: Misorientations of deformation induced boundaries
journal, January 1997

Hughes, D. A.; Liu, Q.; Chrzan, D. C.
Acta Materialia, Vol. 45, Issue 1
DOI: 10.1016/S1359-6454(96)00153-X

On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction
journal, October 2002

Raabe, D.; Zhao, Z.; Mao, W.
Acta Materialia, Vol. 50, Issue 17
DOI: 10.1016/S1359-6454(02)00276-8

Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing
journal, January 2007

Xue, Q.; Beyerlein, I.; Alexander, D.
Acta Materialia, Vol. 55, Issue 2
DOI: 10.1016/j.actamat.2006.08.049

Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials
journal, November 2005

Zhu, Yuntian T.; Langdon, Terence G.
Materials Science and Engineering: A, Vol. 409, Issue 1-2
DOI: 10.1016/j.msea.2005.05.111

Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy
journal, May 2012

Cepeda-Jiménez, Carmen M.; García-Infanta, Juan M.; Rauch, Edgar F.
Metallurgical and Materials Transactions A, Vol. 43, Issue 11
DOI: 10.1007/s11661-012-1206-5

Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature
journal, September 2009

Yapici, G. G.; Tomé, C. N.; Beyerlein, I. J.
Acta Materialia, Vol. 57, Issue 16
DOI: 10.1016/j.actamat.2009.06.050

The stress–strain response of nanocrystalline metals: A quantized crystal plasticity approach
journal, February 2009

Li, L.; Anderson, P.; Lee, M.
Acta Materialia, Vol. 57, Issue 3
DOI: 10.1016/j.actamat.2008.10.035

An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing
journal, July 2013

Jorge, Alberto Moreira; Prokofiev, Egor; Ferreira de Lima, Gisele
International Journal of Hydrogen Energy, Vol. 38, Issue 20
DOI: 10.1016/j.ijhydene.2013.03.158

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Groeber, Michael A.; Jackson, Michael A.
Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1
DOI: 10.1186/2193-9772-3-5

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
journal, March 2015

Lentz, Martin; Klaus, Manuela; Wagner, Michael
Materials Science and Engineering: A, Vol. 628
DOI: 10.1016/j.msea.2015.01.069

Spectral calibration of crystal plasticity models
journal, April 2006

Kalidindi, Surya R.; Duvvuru, Hari K.; Knezevic, Marko
Acta Materialia, Vol. 54, Issue 7
DOI: 10.1016/j.actamat.2005.12.018

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
journal, April 2010

Calcagnotto, Marion; Ponge, Dirk; Demir, Eralp
Materials Science and Engineering: A, Vol. 527, Issue 10-11
DOI: 10.1016/j.msea.2010.01.004

Evolution of nanoscale porosity during equal-channel angular pressing of titanium
journal, June 2009

Lapovok, R.; Tomus, D.; Mang, J.
Acta Materialia, Vol. 57, Issue 10
DOI: 10.1016/j.actamat.2009.02.042

Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities
journal, December 1979

Essmann, U.; Mughrabi, H.
Philosophical Magazine A, Vol. 40, Issue 6
DOI: 10.1080/01418617908234871

Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance
journal, August 2010

Shaffer, Joshua B.; Knezevic, Marko; Kalidindi, Surya R.
International Journal of Plasticity, Vol. 26, Issue 8
DOI: 10.1016/j.ijplas.2010.03.010

Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution
journal, February 2008

Knezevic, Marko; Kalidindi, Surya R.; Mishra, Raja K.
International Journal of Plasticity, Vol. 24, Issue 2
DOI: 10.1016/j.ijplas.2007.05.002

Anisotropic stress–strain response and microstructure evolution of textured α-uranium
journal, January 2012

Knezevic, Marko; Capolungo, Laurent; Tomé, Carlos N.
Acta Materialia, Vol. 60, Issue 2
DOI: 10.1016/j.actamat.2011.10.041

Grain size and orientation distributions: Application to yielding of α-titanium
journal, May 2009

Fromm, Bradley S.; Adams, Brent L.; Ahmadi, Sadegh
Acta Materialia, Vol. 57, Issue 8
DOI: 10.1016/j.actamat.2008.12.037

Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion
journal, June 2015

Jahedi, Mohammad; Paydar, Mohammad Hossein; Knezevic, Marko
Materials Characterization, Vol. 104
DOI: 10.1016/j.matchar.2015.04.012

Stress and strain histories in equal channel angular extrusion/pressing
journal, May 2006

Nagasekhar, A. V.; Tick-Hon, Yip; Li, S.
Materials Science and Engineering: A, Vol. 423, Issue 1-2
DOI: 10.1016/j.msea.2005.09.127

Overview no. 42 Texture development and strain hardening in rate dependent polycrystals
journal, June 1985

Asaro, R. J.; Needleman, A.
Acta Metallurgica, Vol. 33, Issue 6
DOI: 10.1016/0001-6160(85)90188-9

Low-temperature compaction of Ti–6Al–4V powder using equal channel angular extrusion with back pressure
journal, August 2008

Lapovok, R.; Tomus, D.; Muddle, B. C.
Materials Science and Engineering: A, Vol. 490, Issue 1-2
DOI: 10.1016/j.msea.2008.01.075

On the interaction between slip dislocations and twins in HCP Zr
journal, July 2009

Capolungo, L.; Beyerlein, I. J.; Kaschner, G. C.
Materials Science and Engineering: A, Vol. 513-514
DOI: 10.1016/j.msea.2009.01.035

Deformation twinning in AZ31: Influence on strain hardening and texture evolution
journal, November 2010

Knezevic, Marko; Levinson, Amanda; Harris, Ryan
Acta Materialia, Vol. 58, Issue 19
DOI: 10.1016/j.actamat.2010.07.041

Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms
journal, August 2009

Kalidindi, Surya R.; Knezevic, Marko; Niezgoda, Stephen
Acta Materialia, Vol. 57, Issue 13
DOI: 10.1016/j.actamat.2009.04.055

High angle boundaries formed by grain subdivision mechanisms
journal, September 1997

Hughes, D. A.; Hansen, N.
Acta Materialia, Vol. 45, Issue 9
DOI: 10.1016/S1359-6454(97)00027-X

The Role of Collinear Interaction in Dislocation-Induced Hardening
journal, September 2003

Madec, R.
Science, Vol. 301, Issue 5641
DOI: 10.1126/science.1085477

A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys
journal, November 2014

Knezevic, Marko; Beyerlein, Irene J.; Lovato, Manuel L.
International Journal of Plasticity, Vol. 62
DOI: 10.1016/j.ijplas.2014.07.007

Mesoscopic simulations of plastic deformation
journal, July 2001

Devincre, B.; Kubin, L. P.; Lemarchand, C.
Materials Science and Engineering: A, Vol. 309-310
DOI: 10.1016/S0921-5093(00)01725-1

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
journal, August 2014

Knezevic, Marko; Drach, Borys; Ardeljan, Milan
Computer Methods in Applied Mechanics and Engineering, Vol. 277
DOI: 10.1016/j.cma.2014.05.003

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density
journal, March 1999

Arsenlis, A.; Parks, D. M.
Acta Materialia, Vol. 47, Issue 5
DOI: 10.1016/S1359-6454(99)00020-8

From Dislocation Junctions to Forest Hardening
journal, December 2002

Madec, R.; Devincre, B.; Kubin, L. P.
Physical Review Letters, Vol. 89, Issue 25
DOI: 10.1103/PhysRevLett.89.255508

Nanostructuring of metals by severe plastic deformation for advanced properties
journal, August 2004

Valiev, Ruslan
Nature Materials, Vol. 3, Issue 8
DOI: 10.1038/nmat1180

High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling
journal, February 2015

Jahedi, Mohammad; Knezevic, Marko; Paydar, Mohammad Hossein
Journal of Materials Engineering and Performance, Vol. 24, Issue 4
DOI: 10.1007/s11665-015-1426-0

Emergence of grain-size effects in nanocrystalline metals from statistical activation of discrete dislocation sources
journal, May 2015

Yuan, Rui; Beyerlein, Irene J.; Zhou, Caizhi
Acta Materialia, Vol. 90
DOI: 10.1016/j.actamat.2015.02.035

Dislocation modelling of shear in f.c.c. crystals
journal, January 1985

Jackson, P. J.
Progress in Materials Science, Vol. 29, Issue 1-2
DOI: 10.1016/0079-6425(85)90009-X

Deformation behavior of copper during a high pressure torsion process
journal, November 2003

Kim, Hyoung Seop; Hong, Sun Ig; Lee, Young Shin
Journal of Materials Processing Technology, Vol. 142, Issue 2
DOI: 10.1016/S0924-0136(03)00590-9

Modeling the texture evolution of Cu/Nb layered composites during rolling
journal, October 2013

Hansen, B. L.; Carpenter, J. S.; Sintay, S. D.
International Journal of Plasticity, Vol. 49
DOI: 10.1016/j.ijplas.2013.03.001

A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
journal, October 2013

Knezevic, Marko; Beyerlein, Irene J.; Brown, Donald W.
International Journal of Plasticity, Vol. 49
DOI: 10.1016/j.ijplas.2013.03.008

Material-based design of the extrusion of bimetallic tubes
journal, December 2014

Knezevic, Marko; Jahedi, Mohammad; Korkolis, Yannis P.
Computational Materials Science, Vol. 95
DOI: 10.1016/j.commatsci.2014.07.021

Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
journal, April 2013

Knezevic, Marko; McCabe, Rodney J.; Tomé, Carlos N.
International Journal of Plasticity, Vol. 43
DOI: 10.1016/j.ijplas.2012.10.011

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites
journal, May 2014

Ardeljan, Milan; Beyerlein, Irene J.; Knezevic, Marko
Journal of the Mechanics and Physics of Solids, Vol. 66
DOI: 10.1016/j.jmps.2014.01.006

A dislocation-based constitutive law for pure Zr including temperature effects
journal, May 2008

Beyerlein, I. J.; Tomé, C. N.
International Journal of Plasticity, Vol. 24, Issue 5
DOI: 10.1016/j.ijplas.2007.07.017

Crystal plasticity simulations using discrete Fourier transforms
journal, April 2009

Knezevic, Marko; Al-Harbi, Hamad F.; Kalidindi, Surya R.
Acta Materialia, Vol. 57, Issue 6
DOI: 10.1016/j.actamat.2008.12.017

Physics and phenomenology of strain hardening: the FCC case
journal, January 2003

Kocks, U. F.; Mecking, H.
Progress in Materials Science, Vol. 48, Issue 3
DOI: 10.1016/S0079-6425(02)00003-8

Deformation field variations in equal channel angular extrusion due to back pressure
journal, May 2008

Hasani, Arman; Lapovok, Rimma; Tóth, László S.
Scripta Materialia, Vol. 58, Issue 9
DOI: 10.1016/j.scriptamat.2007.12.018

Microstructure and strength of severely deformed fcc metals
journal, July 2007

Gubicza, J.; Chinh, N. Q.; Csanádi, T.
Materials Science and Engineering: A, Vol. 462, Issue 1-2
DOI: 10.1016/j.msea.2006.02.455

Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum
journal, December 2014

Bhattacharyya, Abhishek; Knezevic, Marko; Abouaf, Marc
Metallurgical and Materials Transactions A, Vol. 46, Issue 3
DOI: 10.1007/s11661-014-2686-2

Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion
journal, February 2003

Zhilyaev, A. P.; Nurislamova, G. V.; Kim, B. -K
Acta Materialia, Vol. 51, Issue 3
DOI: 10.1016/S1359-6454(02)00466-4

Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures
journal, May 2007

Knezevic, Marko; Kalidindi, Surya R.
Computational Materials Science, Vol. 39, Issue 3
DOI: 10.1016/j.commatsci.2006.08.025

A multi-scale model for texture development in Zr/Nb nanolayered composites processed by accumulative roll bonding
journal, August 2014

Ardeljan, M.; Knezevic, M.; Nizolek, T.
IOP Conference Series: Materials Science and Engineering, Vol. 63
DOI: 10.1088/1757-899X/63/1/012170

Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr
journal, April 2015

Knezevic, Marko; Zecevic, Milovan; Beyerlein, Irene J.
Acta Materialia, Vol. 88
DOI: 10.1016/j.actamat.2015.01.037

In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry
journal, March 2015

Lentz, Martin; Klaus, Manuela; Beyerlein, Irene J.
Acta Materialia, Vol. 86
DOI: 10.1016/j.actamat.2014.12.003

ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: Microstructure
journal, May 2010

Mckenzie, P. W. J.; Lapovok, R.
Acta Materialia, Vol. 58, Issue 9
DOI: 10.1016/j.actamat.2010.01.038

Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure
journal, June 2006

Lapovok, R.; Loader, C.; Torre, F. H. Dalla
Materials Science and Engineering: A, Vol. 425, Issue 1-2
DOI: 10.1016/j.msea.2006.03.023

A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals
journal, January 1987

Mughrabi, H.
Materials Science and Engineering, Vol. 85
DOI: 10.1016/0025-5416(87)90463-0

On the homogeneity of deformation by high pressure torsion
journal, November 2004

Vorhauer, A.; Pippan, R.
Scripta Materialia, Vol. 51, Issue 9
DOI: 10.1016/j.scriptamat.2004.04.025

Assessment of homogeneity of the shear-strain pattern in Al–7wt%Si casting alloy processed by high-pressure torsion
journal, March 2014

Cepeda-Jiménez, C. M.; Orozco-Caballero, A.; García-Infanta, J. M.
Materials Science and Engineering: A, Vol. 597
DOI: 10.1016/j.msea.2013.12.072

The importance of cross-slip in high-rate deformation
journal, September 2007

Wang, Z. Q.; Beyerlein, I. J.; LeSar, R.
Modelling and Simulation in Materials Science and Engineering, Vol. 15, Issue 6
DOI: 10.1088/0965-0393/15/6/006

Thermal behavior of copper processed by ECAP with and without back pressure
journal, March 2015

Wang, Ya Li; Lapovok, Rimma; Wang, Jing Tao
Materials Science and Engineering: A, Vol. 628
DOI: 10.1016/j.msea.2015.01.021

Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain:
journal, May 2001

Peeters, B.; Bacroix, B.; Teodosiu, C.
Acta Materialia, Vol. 49, Issue 9
DOI: 10.1016/S1359-6454(01)00067-2

Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models
journal, July 2004

Kalidindi, Surya R.; Bhattacharyya, Abhishek; Doherty, Roger D.
Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 460, Issue 2047
DOI: 10.1098/rspa.2003.1260

Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
journal, November 2005

Horita, Zenji; Langdon, Terence G.
Materials Science and Engineering: A, Vol. 410-411
DOI: 10.1016/j.msea.2005.08.133

Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper
journal, June 2013

Ribbe, Jens; Schmitz, Guido; Rösner, Harald
Scripta Materialia, Vol. 68, Issue 12
DOI: 10.1016/j.scriptamat.2013.02.034

A new implementation of the spectral crystal plasticity framework in implicit finite elements
journal, May 2015

Zecevic, Miroslav; McCabe, Rodney J.; Knezevic, Marko
Mechanics of Materials, Vol. 84
DOI: 10.1016/j.mechmat.2015.01.018

Modeling transients in the mechanical response of copper due to strain path changes
journal, April 2007

Beyerlein, Irene J.; Tomé, Carlos N.
International Journal of Plasticity, Vol. 23, Issue 4
DOI: 10.1016/j.ijplas.2006.08.001

Crystallographic texture evolution in bulk deformation processing of FCC metals
journal, January 1992

Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L.
Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3
DOI: 10.1016/0022-5096(92)80003-9

Geometrically necessary dislocation and size-dependent plasticity
journal, January 2003

Gao, Huajian; Huang, Yonggang
Scripta Materialia, Vol. 48, Issue 2
DOI: 10.1016/S1359-6462(02)00329-9

An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
journal, June 2015

Zecevic, Milovan; Knezevic, Marko; Beyerlein, Irene J.
Materials Science and Engineering: A, Vol. 638
DOI: 10.1016/j.msea.2015.04.066

Using high-pressure torsion for metal processing: Fundamentals and applications
journal, August 2008

Zhilyaev, A.; Langdon, T.
Progress in Materials Science, Vol. 53, Issue 6
DOI: 10.1016/j.pmatsci.2008.03.002

Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal
journal, December 2008

Zhao, Z.; Ramesh, M.; Raabe, D.
International Journal of Plasticity, Vol. 24, Issue 12
DOI: 10.1016/j.ijplas.2008.01.002

Deformation behavior of Cu-based nanocomposite processed by severe plastic deformation
journal, December 2001

Islamgaliev, R. K.; Buchgraber, W.; Kolobov, Y. R.
Materials Science and Engineering: A, Vol. 319-321
DOI: 10.1016/S0921-5093(01)01073-5

Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding
journal, June 2015

Carpenter, J. S.; Nizolek, T.; McCabe, R. J.
Acta Materialia, Vol. 92
DOI: 10.1016/j.actamat.2015.03.020

Principles of equal-channel angular pressing as a processing tool for grain refinement
journal, September 2006

Valiev, Ruslan Z.; Langdon, Terence G.
Progress in Materials Science, Vol. 51, Issue 7
DOI: 10.1016/j.pmatsci.2006.02.003

Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials
journal, February 1976

Hutchinson, J. W.
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 348, Issue 1652
DOI: 10.1098/rspa.1976.0027

Stochastic Processes of {1012} Deformation Twinning in Hexagonal Close-Packed Polycrystalline Zirconium and Magnesium
journal, January 2011

Beyerlein, Irene J.; McCabe, R. J.; Tome, C. N.
International Journal for Multiscale Computational Engineering, Vol. 9, Issue 4
DOI: 10.1615/IntJMultCompEng.v9.i4.80

On the strength of dislocation interactions and their effect on latent hardening in pure Magnesium
journal, November 2014

Bertin, N.; Tomé, C. N.; Beyerlein, I. J.
International Journal of Plasticity, Vol. 62
DOI: 10.1016/j.ijplas.2014.06.010

Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy
journal, July 2015

Zecevic, Miroslav; McCabe, Rodney J.; Knezevic, Marko
International Journal of Plasticity, Vol. 70
DOI: 10.1016/j.ijplas.2015.03.007

Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
journal, October 2013

Knezevic, Marko; McCabe, Rodney J.; Lebensohn, Ricardo A.
Journal of the Mechanics and Physics of Solids, Vol. 61, Issue 10
DOI: 10.1016/j.jmps.2013.05.005

Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling
journal, March 2014

Jorge, Alberto Moreira; Ferreira de Lima, Gisele; Martins Triques, Maria Regina
International Journal of Hydrogen Energy, Vol. 39, Issue 8
DOI: 10.1016/j.ijhydene.2013.12.154

Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
journal, July 2008

Knezevic, Marko; Kalidindi, Surya R.; Fullwood, David
International Journal of Plasticity, Vol. 24, Issue 7
DOI: 10.1016/j.ijplas.2007.12.002

Kinetics of flow and strain-hardening
journal, November 1981

Mecking, H.; Kocks, U. F.
Acta Metallurgica, Vol. 29, Issue 11
DOI: 10.1016/0001-6160(81)90112-7

Study on the orientational stability of cube-oriented FCC crystals under plane strain by use of a texture component crystal plasticity finite element method
journal, April 2004

Raabe, D.
Scripta Materialia, Vol. 50, Issue 7
DOI: 10.1016/j.scriptamat.2003.11.061

Elastic–plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories
journal, May 2007

Wu, X.; Proust, G.; Knezevic, M.
Acta Materialia, Vol. 55, Issue 8
DOI: 10.1016/j.actamat.2006.12.010

Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements
journal, March 2013

Knezevic, Marko; Lebensohn, Ricardo A.; Cazacu, Oana
Materials Science and Engineering: A, Vol. 564
DOI: 10.1016/j.msea.2012.11.037

A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
journal, September 1993

Lebensohn, R. A.; Tomé, C. N.
Acta Metallurgica et Materialia, Vol. 41, Issue 9
DOI: 10.1016/0956-7151(93)90130-K

Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling
journal, January 2014

Knezevic, Marko; Carpenter, John S.; Lovato, Manuel L.
Acta Materialia, Vol. 63
DOI: 10.1016/j.actamat.2013.10.021

Texture evolution and enhanced grain refinement under high-pressure-double-torsion
journal, August 2014

Jahedi, Mohammad; Paydar, Mohammad Hossein; Zheng, Shijian
Materials Science and Engineering: A, Vol. 611
DOI: 10.1016/j.msea.2014.05.081

Similar Records in DOE PAGES and OSTI.GOV collections:

Stability and amorphization of Cu-Nb interfaces during severe plastic deformation: Molecular dynamics simulations of simple shear

Journal Article Zhou, J ; Averback, R. S. ; Bellon, P. - Acta Materialia
https://doi.org/10.1016/j.actamat.2014.03.055
Stability and amorphization of Cu–Nb interfaces during severe plastic deformation: Molecular dynamics simulations of simple shear

Journal Article Zhou, J. ; Averback, R. S. ; Bellon, P. - Acta Materialia
https://doi.org/10.1016/j.actamat.2014.03.055
Orientation-dependent grain growth in a bulk nanocrystalline alloy during the uniaxial compressive deformation

Journal Article Fan, G J ; Wang, Y D ; Fu, L F ; ... - Applied Physics Letters

The microstructural evolution during the uniaxial compression of an as-deposited bulk nanocrystalline (nc) Ni-Fe (average grain size d{approx_equal}23 nm) at ambient temperature was investigated by the high-energy x-ray diffraction (HEXRD) and the transmission-electron microscopy (TEM). HEXRD measurements indicated that the grain growth occurred in the nc Ni-Fe alloy during the uniaxial compression tests and that the grain growth shows orientation dependence, i.e., the grains preferentially grow perpendicular to the loading direction. This preferred grain growth was further confirmed by the TEM observations, indicating that the grains were elongated after the compressive plastic deformation.
https://doi.org/10.1063/1.2200589
Orientation-dependent grain growth in a bulk nanocrystalline alloy during the uniaxial compressive deformation.

Journal Article Fan, G J ; Wang, Y D ; Fu, L F ; ... - Appl. Phys. Lett. ; 88: 171914

No abstract prepared.
https://doi.org/10.1063/1.2200589
Analysis of shear bands in simple shearing deformations of nonpolar and dipolar viscoplastic materials

Journal Article Batra, R C - Applied Mechanics Reviews

During the past few years we have studied numerically the initiation and growth of shear bands in nonpolar and dipolar viscoplastic materials being deformed in simple shear, and in nonpolar materials undergoing plane strain deformations. We summarize here our work for the former problem. 28 refs., 11 figs.
https://doi.org/10.1115/1.3121382

Similar Records

Title: Enhancement of orientation gradients during simple shear deformation by application of simple compression

Citation Formats

The type of dislocation interaction as the factor determining work hardening journal, December 1980

Second Paper on Statistics Associated with the Random Disorientation of Cubes journal, January 1958

A high-performance computational framework for fast crystal plasticity simulations journal, February 2014

Anomalous Basal Slip Activity in Zirconium under High-strain Deformation journal, September 2013

Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding journal, June 2014

Technical parameters affecting grain refinement by high pressure torsion journal, December 2009

Scaling of microstructural parameters: Misorientations of deformation induced boundaries journal, January 1997

On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction journal, October 2002

Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing journal, January 2007

Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials journal, November 2005

Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy journal, May 2012

Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature journal, September 2009

The stress–strain response of nanocrystalline metals: A quantized crystal plasticity approach journal, February 2009

An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing journal, July 2013

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D journal, April 2014

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling journal, March 2015

Spectral calibration of crystal plasticity models journal, April 2006

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD journal, April 2010

Evolution of nanoscale porosity during equal-channel angular pressing of titanium journal, June 2009

Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities journal, December 1979

Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance journal, August 2010

Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution journal, February 2008

Anisotropic stress–strain response and microstructure evolution of textured α-uranium journal, January 2012

Grain size and orientation distributions: Application to yielding of α-titanium journal, May 2009

Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion journal, June 2015

Stress and strain histories in equal channel angular extrusion/pressing journal, May 2006

Overview no. 42 Texture development and strain hardening in rate dependent polycrystals journal, June 1985

Low-temperature compaction of Ti–6Al–4V powder using equal channel angular extrusion with back pressure journal, August 2008

On the interaction between slip dislocations and twins in HCP Zr journal, July 2009

Deformation twinning in AZ31: Influence on strain hardening and texture evolution journal, November 2010

Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms journal, August 2009

High angle boundaries formed by grain subdivision mechanisms journal, September 1997

The Role of Collinear Interaction in Dislocation-Induced Hardening journal, September 2003

A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys journal, November 2014

Mesoscopic simulations of plastic deformation journal, July 2001

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models journal, August 2014

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density journal, March 1999

From Dislocation Junctions to Forest Hardening journal, December 2002

Nanostructuring of metals by severe plastic deformation for advanced properties journal, August 2004

High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling journal, February 2015

Emergence of grain-size effects in nanocrystalline metals from statistical activation of discrete dislocation sources journal, May 2015

Dislocation modelling of shear in f.c.c. crystals journal, January 1985

Deformation behavior of copper during a high pressure torsion process journal, November 2003

Modeling the texture evolution of Cu/Nb layered composites during rolling journal, October 2013

A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium journal, October 2013

Material-based design of the extrusion of bimetallic tubes journal, December 2014

Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity journal, April 2013

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites journal, May 2014

A dislocation-based constitutive law for pure Zr including temperature effects journal, May 2008

Crystal plasticity simulations using discrete Fourier transforms journal, April 2009

Physics and phenomenology of strain hardening: the FCC case journal, January 2003

Deformation field variations in equal channel angular extrusion due to back pressure journal, May 2008

Microstructure and strength of severely deformed fcc metals journal, July 2007

Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum journal, December 2014

Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion journal, February 2003

Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures journal, May 2007

A multi-scale model for texture development in Zr/Nb nanolayered composites processed by accumulative roll bonding journal, August 2014

Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr journal, April 2015

In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry journal, March 2015

ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: Microstructure journal, May 2010

Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure journal, June 2006

A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals journal, January 1987

On the homogeneity of deformation by high pressure torsion journal, November 2004

Assessment of homogeneity of the shear-strain pattern in Al–7wt%Si casting alloy processed by high-pressure torsion journal, March 2014

The importance of cross-slip in high-rate deformation journal, September 2007

Thermal behavior of copper processed by ECAP with and without back pressure journal, March 2015

Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain: journal, May 2001

Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models journal, July 2004

Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion journal, November 2005

Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper journal, June 2013

A new implementation of the spectral crystal plasticity framework in implicit finite elements journal, May 2015

Modeling transients in the mechanical response of copper due to strain path changes journal, April 2007

Crystallographic texture evolution in bulk deformation processing of FCC metals journal, January 1992

Geometrically necessary dislocation and size-dependent plasticity journal, January 2003

An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals journal, June 2015

Using high-pressure torsion for metal processing: Fundamentals and applications journal, August 2008

Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal journal, December 2008

Deformation behavior of Cu-based nanocomposite processed by severe plastic deformation journal, December 2001

The type of dislocation interaction as the factor determining work hardening
journal, December 1980

Second Paper on Statistics Associated with the Random Disorientation of Cubes
journal, January 1958

A high-performance computational framework for fast crystal plasticity simulations
journal, February 2014

Anomalous Basal Slip Activity in Zirconium under High-strain Deformation
journal, September 2013

Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding
journal, June 2014

Technical parameters affecting grain refinement by high pressure torsion
journal, December 2009

Scaling of microstructural parameters: Misorientations of deformation induced boundaries
journal, January 1997

On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction
journal, October 2002

Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing
journal, January 2007

Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials
journal, November 2005

Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy
journal, May 2012

Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature
journal, September 2009

The stress–strain response of nanocrystalline metals: A quantized crystal plasticity approach
journal, February 2009

An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing
journal, July 2013

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
journal, March 2015

Spectral calibration of crystal plasticity models
journal, April 2006

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
journal, April 2010

Evolution of nanoscale porosity during equal-channel angular pressing of titanium
journal, June 2009

Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities
journal, December 1979

Building texture evolution networks for deformation processing of polycrystalline fcc metals using spectral approaches: Applications to process design for targeted performance
journal, August 2010

Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution
journal, February 2008

Anisotropic stress–strain response and microstructure evolution of textured α-uranium
journal, January 2012

Grain size and orientation distributions: Application to yielding of α-titanium
journal, May 2009

Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion
journal, June 2015

Stress and strain histories in equal channel angular extrusion/pressing
journal, May 2006

Overview no. 42 Texture development and strain hardening in rate dependent polycrystals
journal, June 1985

Low-temperature compaction of Ti–6Al–4V powder using equal channel angular extrusion with back pressure
journal, August 2008

On the interaction between slip dislocations and twins in HCP Zr
journal, July 2009

Deformation twinning in AZ31: Influence on strain hardening and texture evolution
journal, November 2010

Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms
journal, August 2009

High angle boundaries formed by grain subdivision mechanisms
journal, September 1997

The Role of Collinear Interaction in Dislocation-Induced Hardening
journal, September 2003

A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys
journal, November 2014

Mesoscopic simulations of plastic deformation
journal, July 2001

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
journal, August 2014

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density
journal, March 1999

From Dislocation Junctions to Forest Hardening
journal, December 2002

Nanostructuring of metals by severe plastic deformation for advanced properties
journal, August 2004

High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling
journal, February 2015

Emergence of grain-size effects in nanocrystalline metals from statistical activation of discrete dislocation sources
journal, May 2015

Dislocation modelling of shear in f.c.c. crystals
journal, January 1985

Deformation behavior of copper during a high pressure torsion process
journal, November 2003

Modeling the texture evolution of Cu/Nb layered composites during rolling
journal, October 2013

A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
journal, October 2013

Material-based design of the extrusion of bimetallic tubes
journal, December 2014

Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
journal, April 2013

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites
journal, May 2014

A dislocation-based constitutive law for pure Zr including temperature effects
journal, May 2008

Crystal plasticity simulations using discrete Fourier transforms
journal, April 2009

Physics and phenomenology of strain hardening: the FCC case
journal, January 2003

Deformation field variations in equal channel angular extrusion due to back pressure
journal, May 2008

Microstructure and strength of severely deformed fcc metals
journal, July 2007

Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum
journal, December 2014

Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion
journal, February 2003

Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures
journal, May 2007

A multi-scale model for texture development in Zr/Nb nanolayered composites processed by accumulative roll bonding
journal, August 2014

Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr
journal, April 2015

In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry
journal, March 2015

ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: Microstructure
journal, May 2010

Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure
journal, June 2006

A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals
journal, January 1987

On the homogeneity of deformation by high pressure torsion
journal, November 2004

Assessment of homogeneity of the shear-strain pattern in Al–7wt%Si casting alloy processed by high-pressure torsion
journal, March 2014

The importance of cross-slip in high-rate deformation
journal, September 2007

Thermal behavior of copper processed by ECAP with and without back pressure
journal, March 2015

Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain:
journal, May 2001

Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models
journal, July 2004

Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
journal, November 2005

Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper
journal, June 2013

A new implementation of the spectral crystal plasticity framework in implicit finite elements
journal, May 2015

Modeling transients in the mechanical response of copper due to strain path changes
journal, April 2007

Crystallographic texture evolution in bulk deformation processing of FCC metals
journal, January 1992

Geometrically necessary dislocation and size-dependent plasticity
journal, January 2003

An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
journal, June 2015

Using high-pressure torsion for metal processing: Fundamentals and applications
journal, August 2008

Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal
journal, December 2008

Deformation behavior of Cu-based nanocomposite processed by severe plastic deformation
journal, December 2001

Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding
journal, June 2015

Principles of equal-channel angular pressing as a processing tool for grain refinement
journal, September 2006