skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Fabrication of wedged multilayer Laue lenses

Abstract

We present a new method to fabricate wedged multilayer Laue lenses, in which the angle of diffracting layers smoothly varies in the lens to achieve optimum diffracting efficiency across the entire pupil of the lens. This was achieved by depositing a multilayer onto a flat substrate placed in the penumbra of a straight-edge mask. The distance between the mask and the substrate was calibrated and the multilayer Laue lens was cut in a position where the varying layer thickness and the varying layer tilt simultaneously satisfy the Fresnel zone plate condition and Bragg’s law for all layers in the stack. This method can be used to extend the achievable numerical aperture of multilayer Laue lenses to reach considerably smaller focal spot sizes than achievable with lenses composed of parallel layers.

Authors:
 [1];  [1];  [2];  [3];  [4];  [1]
  1. Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)
  2. SLAC National Accelerator Lab., Menlo Park, CA (United States)
  3. Univ. of Bialystok, Bialystok (Poland)
  4. Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Univ. of Hamburg, Hamburg (Germany)
Publication Date:
Research Org.:
SLAC National Accelerator Lab., Menlo Park, CA (United States)
Sponsoring Org.:
USDOE
OSTI Identifier:
1193752
Resource Type:
Accepted Manuscript
Journal Name:
Optical Materials Express
Additional Journal Information:
Journal Volume: 5; Journal Issue: 4; Journal ID: ISSN 2159-3930
Publisher:
Optical Society of America (OSA)
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING

Citation Formats

Prasciolu, M., Leontowich, A. F. G., Krzywinski, J., Andrejczuk, A., Chapman, H. N., and Bajt, S. Fabrication of wedged multilayer Laue lenses. United States: N. p., 2015. Web. doi:10.1364/OME.5.000748.
Prasciolu, M., Leontowich, A. F. G., Krzywinski, J., Andrejczuk, A., Chapman, H. N., & Bajt, S. Fabrication of wedged multilayer Laue lenses. United States. doi:10.1364/OME.5.000748.
Prasciolu, M., Leontowich, A. F. G., Krzywinski, J., Andrejczuk, A., Chapman, H. N., and Bajt, S. Thu . "Fabrication of wedged multilayer Laue lenses". United States. doi:10.1364/OME.5.000748. https://www.osti.gov/servlets/purl/1193752.
@article{osti_1193752,
title = {Fabrication of wedged multilayer Laue lenses},
author = {Prasciolu, M. and Leontowich, A. F. G. and Krzywinski, J. and Andrejczuk, A. and Chapman, H. N. and Bajt, S.},
abstractNote = {We present a new method to fabricate wedged multilayer Laue lenses, in which the angle of diffracting layers smoothly varies in the lens to achieve optimum diffracting efficiency across the entire pupil of the lens. This was achieved by depositing a multilayer onto a flat substrate placed in the penumbra of a straight-edge mask. The distance between the mask and the substrate was calibrated and the multilayer Laue lens was cut in a position where the varying layer thickness and the varying layer tilt simultaneously satisfy the Fresnel zone plate condition and Bragg’s law for all layers in the stack. This method can be used to extend the achievable numerical aperture of multilayer Laue lenses to reach considerably smaller focal spot sizes than achievable with lenses composed of parallel layers.},
doi = {10.1364/OME.5.000748},
journal = {Optical Materials Express},
number = 4,
volume = 5,
place = {United States},
year = {2015},
month = {1}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 4 works
Citation information provided by
Web of Science

Save / Share: